Estaciones de montaje (16)

Diversas mesas de montaje para casas prefabricadas en serie Modelos de 3 metros x 6 metros a 9 metros Instalación automática del muro de la casa 12mx2,50 m Distribución total con 9 elementos Visualización posible con cita previa

0: ja_yes Ancho de trabajo: - MM0: - 0 Mesa de ajuste de guillotina Striffler--------------------------------------------------------- con destornillador automático y alimentador de tornillos - Portaequipamiento - Perforador para accesorios Roto (Especificaciones técnicas según el fabricante, sin garantía!)Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

CARACTERÍSTICAS TÉCNICAS: Centro de mecanizado para el procesamiento final y montaje de accesorios en ventanas y puertas Dimensiones banco de trabajo mm: 2.800 x 1.250 Unidad de perforación de tres husillos para orificios de agarre Sistema neumático para lectura y corte de asas de ventanas "Cremonese" Banco de trabajo basculante Completo con destornillador neumático

0: ja Working width: 3000 mm0: nein Eder + Mueller fitting centre for windows---------------------------------Sale on behalf of the customer from the customers location.The machine was in use until closing and is now at the customers warehouse.Previous hardware: Maco Multi Matic (other hardware is also possible)Technical manufacturers description:---------------------------------Table height and working angle mechanically adjustablewith permanently mounted hardware bearingSash stop table, length 3,000 mm, with fixed hardware bearingFelt-bonded support12 pivoting counterholders for hanging the sashesHardware detection for centered and constant gear position1 storage unit with 4-way air connectionwith automatic special screwdriverwith pneumatic depth stop6-way turret stop for different screw depthsPneumatic height adjustment for 6 screw levelsAutomatic screw feedManual insertion for a seco ...

Manual hand unit: Nein J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Nein J/NClip set 351 on the loose item------------------------------------Manufacturer description:- Base frame in stable welded construction- Clip container as tipping conveyor with separation and feeding the clips- Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment- Conveyor belt length approx. 4,000 mm as NC axis- Contact and clamping cylinder- Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered- Workflow automatically in flow--------------------------------------Technical specifications:- Screw height 50-120 mm- Profile length 350-3,500 mm- Table height approx. 950 mm--------------------------------------Total price of the machine ex works: on request!Freight costs within Ger ...

Dimensiones (L,W): 2000 x 1200 mmPeso: , kginclinable sí/no: mesa de trabajo Bauerle nein ------------------------Longitud 2000mmAncho 1200mmAltura aprox. 900 mm (altura ajustable)

Manual hand unit: Ja J/NAutomatic for single pieces: J/NAutomatic for frames: Ja J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 2000,3000,4000 mmWeight: 100 kgtiltable yes/no: nein neinAssembly glazing and sealing stand with lifting device RU -S1Stop - and assembly table standing, length 2000 mm, width 700 mmPlant height 1600 mm, lifting device with pneumatic 300-1000 mm,Space than roller conveyor , roll length 200 mm, roller pitch 200mm.Roller conveyor height adjustable 280-350 mm. Contact surface withFelt strips and a height-adjustable rubber roller bar at the bottom toTop . Conditioning grille to protect the edges , left and right respectively oneRole as edge protection for elements up to 2500 mm height.Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm,2 shelf boards, load capacity 300 kg.alternatively :-------------RU -S2Stop and assembly table standing . Same as RU -S1However, length 3000 mmalternatively :------------RU- S3Stop and assembly table standing des ...

: - Working width: - mm: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions -Prices on request!RUCHSER standard offer with layout fora wooden window production with being milledGlass bar and screwed corner joints.Daily capacity approximately 15 WindowManufacturing consisting of:Item 1.0 - Item 107 850 000RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mmfor horizontal position round and transport ofProfile sections.12 support arms each column welded tothe column, 2 adjustable center column,clear spacing of the support arms 130 mm,Depth of the support arms on each side 400 mm,Support arms covered with felt, with 4 plasticswivel castors, diameter 150 mm, of which2 with stop means.Item 2.0 - Item 0150001RU-M rotation - tilting tablemanually tiltable bearing surface 1300 x 1400 mm,with 4 plug extension 1 ...

Manual hand unit: J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Ja J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja Working width: 3000 (3500) mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): , mmWeight: ca. 90 kgadjustable height (yes/no): ja stroke: 300 - 800 mmsurface of working table: 1.700 x 1.500 mmtable width: max. 3.800 mm0: ca. 130 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

Dimensions (L,W): 1400 x 1750 mmWeight: , kgtiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4---------------------------------------Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazingEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no .: 8820000RU-MKS-1,4 assembly tilting tableBasic dimensions 1400 x 1750 mm, extended 3400 x 2500 mmSupport surface with 3 support bars, 2 of which are adjustable,one permanently mounted on the upper extension,covered with felt. Support surface with width andHeight / depth pull-out. Pneumatic tilting device,Payload 130 kg. Actuation via foot valve.Roller conveyor can be folded down manually and pulled out to the sidefrom 1400-2500 mm, roll length 140 mmclosed. Roller conveyor height in verticalTable position adjustable from 300-380 mm,Ho ...