máquinas de producción de ventanas usadas para la venta (153)

Vendo el sistema de ángulo de ventana scM Multiflex. Cabezales de fresado VIVALDI EU68mm. Incisión + huso de cono derecho / lado cono. 2 piezas. husillo de fresado de perfil + lista de vidrio sierra de corte izquierda / lado formador de rollo Disponible lo mismo.

Vendo la línea completa de perfilado de construcción de ventanas: 1 uds. Cepilladora de cuatro lados de 5 husillos con sierra Weinig Unimat 23EL - sin rectificadoras HESS - otra máquina de sustitución con cita previa Sistema de corte y ranurado de 2 grifos Weinig Unitec 10. 2 uds. perfil convertidor automático centro Weinig Univar 10. - Conjunto de alimentadores y forrajeros completos de automatización Weinig. - sin un ordenador central - debe añadirse y programarse. Año de construcción 1997. Cabezales de fresado OERTLI. Disponible lo mismo. Inmediatamente desmontado con palets originales. Precio en conjunto de solo 48.000 euros. Condición muy buena!

Vendo el kit de construcción de ventanas: 1 uds. sistema de corte y ranurado de cono Weinig Unitec 10. 1 uds. perfil convertidor automático centro Weinig Univar 10. Año de construcción 1998. Cabezales de fresado OERTLI. Disponible lo mismo. Precio en conjunto 10.000 euros. Condición muy buena!

Vendo el sistema de corte y ranurado de cono Fensterbau Weinig Unitec 10. Año de construcción 1998. Cabezales de fresado OERTLI. Disponible lo mismo. Precio unitario 5.500 euros. 3 uds. disponible. Condición muy buena!

Vendo el Fensterbau Profil Umfälzautomat Zentrum Weinig Univar 10. Año de construcción 1998. Cabezales de fresado OERTLI. Disponible lo mismo. Precio unitario 5.500 euros. 4 uds. disponible. Condición muy buena!

: 3000,4000 mmWorking height: 2400 mm: 300 - 800 mmRuchser Glazing and inspection press RU-VGP 3-------------------------------------------------Maximum clamping width 3000 mmLength 3550 mm, width 900 mm, height 2700 mm,system height 1900 mm, press beam height 2400 mm.Clamping beam depth 150 mm.System section covered with felt, the bars arewelded at heights of 150, 330, 550, 1000 and 1900 mmabove the exit roller conveyor.Set-up surface as roller conveyor withroller diameter 50 mm, roller length 200 mm,roller spacing 200 mm.Lifting device from 300 to 800 mm above the floor.One clamping beam mounted so that it can be folded down, secondclamping beam mounted so that it can be moved but not folded down.When ordering, please specify whether the right orleft clamping beam should be movable!-------------------------------------------------Price of the above machine: on request!----------------- ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmWeinig Unicontrol 6For sale on behalf of a customer, to be collected from siteMachine can be viewed whilst still in operationIncludes tools IV 77, IV 68, see PDF attachments-----------------------------------------Technical Data Summary(please enquire about any additional accessories that may be included)Item 1: Cross-cut saw----------------------------> Electronic cross-cut saw, horizontally infinitely adjustable> Number of tools: 1> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Max. tool diameter: 400 mm> Motor power: 3.0 kW> Laser alignment beam for identifying the cut section> NC length stop, mounted on slotted table, included Positioning of the crosscut saw integrated into the control system.> Length 3,500 mmItem 2: Tenoning and slotting spindle----------------------------> Number of tools: 3/4 (pn ...

Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mmControl: Weinig PC-Nexus Weinig Unicontrol 11 NC window production system with an extensive set of tooling-----------------------------------------INCLUDES:- Weinig Univar 6 rebating/profiling machine- Tooling for both the Unicontrol 11 and Univar 6The machines can be viewed in operation until the end of calendar week 46, 2026. Dismantling and loading must take place during calendar week 47, 2026.(Note: If the buyer is unable to collect the equipment during week 47, temporary storage at our facility can be arranged.)OPTIONAL (for an additional charge):Professional dismantling and loading of the machines onto the customers trucks: 4,500.00 EURManufacturers technical specifications:-----------------------------------------Item 1: Weinig Unicontrol 11 window production system (built 2007)------------------------ ...

Tenoning spindle: 1 St.Number of milling agregates: 1 St.Spindle diameter: 40 mmSmall-scale window manufacturing consisting of:The machines remained in working order at our customers site until they were dismantled--------------------------------------------------1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines.1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78,manufactured in 20114) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatichardware.(Hardware can be converted for an additional charge upon request!)--------------------------------------------------Technical Manufacturers Description:- Haberkorn FZS1 slotting machine with automatic feed,- Stepless height adjustment D 40 mmCrosscut saw:- Spindle arrangement: top- Three-phase mot ...

Tenoning spindle: 1 0Number of milling agregates: 2 St.Spindle diameter: 40,50 mmItem 1: Okoma UF1 S Angle Combination Unit and Item 2: UF2 EG Rebating Machine, incl. Item 3: Tooling Set for IV78 Timber Windows, IV78 Timber Entrance Doors, and IV78 Timber-Aluminum Windows (Gutmann system) with straight and angled sash profilesFor sale on behalf of a customer, still connected to the mains and extraction systemThe machines are in excellent condition and can still be demonstrated-------------------------------------------------------Man ufacturers Technical Description:Item 1: Okoma UF 1 S Tenoning and Profiling Machine / Rebating Machine---------------------------------Compact, heavy-duty automatic window machine featuring a cast-iron construction,consisting of:Top-mounted cross-cut saw with 12-position turret stop system,Positive-guided saw guard for accident preventionTenoning spindle: 4 ...

number of aggregates: 2 St.working width: 2000-3500 mmwork height max.: 2450-3200 mmWintech M9Cb Sealing MachineAutomatic sealing system for wooden windows and doors with 2processing units. For a detailed description, see the PDF document.-----------------------------------Manufacturer’s technical description:M9Cb robotic sealing systemThe machine comprises a robust structure made from aluminium profiles,fitted with motorised conveyor belts on which thewindow units are transported. The silicone is distributed evenly into thejoint by means of two automatically controlled nozzles. The electroniccontrol system, which is in constant communication with the sensor, determinesthe movement of the guns and the operating parameters.Technical data: Standard OptionalMax. window width 2000 mm 3500 mmMax. window height  ...

Auction-ID: A1-47368-100

Auction-ID: A3-46142-11668

Number of spindles: 4 St.Number of tools: variabel St.Spindle diameter: 50 mmSpindle length: 320,320,320,160 mmWEINIG UNIVAR 12 NC AUTOMATIC PROFILING AND MILLING MACHINE-----------------------------------------Machine can still be seen in operation!Includes mechanization/handling equipment.For milling the perimeter of windows, doors, and similar itemswith non-uniform (varying) profiles.For profiling individual components. PROCESSING UNITS-----------------------------------------1. Profiling Spindle-----------------------------------------Motor power: 11 kW (15 hp)Spindle diameter: 50 mmSpindle speed: 6000 rpmTool clamping length: 320 mmNumber of tool positions: variable, infinitely adjustable via NCRadial and axial adjustment: NC-controlled axesSynchronous feed device with automatic plunge function2. Profiling Spindle-----------------------------------------Motor power: 11 kW (15 hp)Spi ...

Tenoning spindle: 2 St.Number of milling agregates: 7 St.Spindle diameter: 50 mmcontrol: Weinig PC-Nexus Weinig Uncontrol 12with radial and axial CNC spindles and VARIO table.. The machine has already been professionally dismantled and stored in 73447 OberkochenSpecifications summary(please inquire about any additional accessories included).. crosscut saw.. > Crosscut saw electronically, horizontally infinitely adjustable> Number of tools: 1 pc.> Spindle speed: 3000-6000 rpm> Spindle diameter: 40 mm> Tool diameter max.: 400 mm> Motor power: 3.7 kW> Laser guide light for detecting the sawing section> Axial adjustment path 150 mm NC axis, electronically stepless> Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from aboverounding aggregate.. > Position: horizontally below> Axial adjustment path together with the crosscut saw.electronic length stop.. > Length 4500mm1. ...

Tenoning spindle: 1 St.Number of milling agregates: 4 St.Spindle diameter: 50 mmWeinig Unicontrol 6 with NC-controlled spindles-----------------------------------------The machine was in daily operation until September 2026, at which point it was professionally dismantled and placed into storage at our facility.Summary of Technical Specifications(Please inquire regarding any additional accessories that may be included)Pos. 1: Cross-cut saw----------------------------> Electronic cross-cut saw, horizontally infinitely adjustable> Number of tools: 1> Spindle speed: 2,800 rpm> Spindle diameter: 40 mm> Max. tool diameter: 400 mm> Motor power: 3.0 kW> Laser alignment light for identifying the cut line> NC-controlled length stop, mounted on the tenoning table,positioning of the cross-cut saw is integrated into the control system. > Length 3500 mmItem 2: Tenoning and slotting spindle----------- ...

Working width: 3550 mmWorking height: 2550 mmNumber of cylinders: 5 St.Hess Quickstep Frame Press----------------------------------Summary of Technical Specifications(Please inquire regarding any additional accessories that may be included)---------------------------------------General--------------- ------------------------Working width: 3550 mmWorking height: 2550 mm- Siemens S7-1200 control system (replaced in 2024)PLC control for automated pressing cycle,(optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints)manual control mode also available- Hydraulic power unit and hoses replaced in 2024Features:---------------------------------------> Hydraulic: Yes> Number of vertical pressing cylinders: 3> Number of horizontal pressing cylinders: 2> Vertical adjustment method: Electro-hydraulic (long-stroke cylinders)> Horizontal adjustment  ...

Manual hand unit: Ja J/NAutomatic for single pieces: , J/NAutomatic for frames: , J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Incluye 2 líneas de prensado montadas en paralelo. - Longitud de los tableros desde 2440 mm hasta 2850 mm. - Anchura de los tableros desde 1830 mm hasta 2100 mm. - Espesor de los tableros desde 3 mm hasta 40 mm. - Cada línea consta de : • Sistema automático de carga de paneles. • Sistema de posicionamiento del papel. • Prensa SIEMPELKAMP: dimensiones de los platos 2950 x 2200 x 150 mm, apertura máxima 270 mm, fuerza total de prensado 23940 KN, presión máxima de trabajo 320 Bares, temperatura de trabajo 220° C, calentamiento de los platos con aceite térmico, rendimiento máximo 150 prensados/hora. • Unidad de limpieza de bordes. • Mesa basculante de enfriamiento. • Transportadores intermedios. • Sistema de visión artificial. - Flejadora automática BIELE y almacén final (comunes a las 2 líneas). - Condiciones de f ...

Working width: 3000 mmWorking height: 2000 mmNumber of cylinders: 5 St.S&S Frame Press, Type RP 3000-------------------------------------Working width: 3000 mmWorking height: 2000 mmItem 100000431S&S FRAME PRESS Type RP 3000Item 200000371Centre pressure beam with pressure cylinderdouble-acting, weight compensation,pressure hose and shut-off valveup to 2000 mm highItem 300000039Shut-off valve on the 1st vertical cylinderItem 400000039Shut-off valve on the 3rd vertical cylinderItem 500000039Shut-off valve on the upper horizontal cylinderItem 600000039Shut-off valve on the lower horizontal cylinderManufacturer’s technical description:Sturdy welded frame construction made from thick-walled special hollow sections,sliding carriages and pressure beams with 50 mm hole spacing.Continuous abutment on the left-hand side for width compression, lower abutmenton two levels. Vertical press cylinders ...

Working width: 3450 mmWorking height: 2000 mmNumber of cylinders: 5 St.loading dimensions L x W x H: 3600 x 1200 x 2720 mmHess Multipress Perforated Plate PressFor all sloped, segmental, and round-arch windows and doors.Also for interior work or frame construction.For gluing staircase block joints and much more.Largest working area approx. 3450 x 2000 mmExternal dimensions approx. 3600 x 1200 x 2720 mmThe vertical perforated plate press is constructed of heavy-duty, torsion-free steel.Thanks to its simple, robust, and economical design,it has a long service life.The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking.5 plug-in hand hydraulic cylinderson a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke4 fixed indiv ...

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5300 x 1250 x 3330 mmS&S frame press type RP 2000,-----------------------------C E - versionStable frame welded construction made of thick-walled special hollow profiles,Sliding carriage and pressure bar with 50 mm hole pattern.Continuous abutment on the left for width compression, lower abutmentin two levels.Vertical press cylinder on special pressure bar with one-hand quick adjustmentwith weight compensation in the 50 mm hole pattern, height-adjustable, longSliding carriages ensure thepermanent absorption of high pressing forces.Fast, smooth width adjustment with ball-bearing carriageCentral locking, fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height and withEquipped with counterbalance.Lower horizontal press cylinder with center holes for the twoAbutme ...

System: 68,78,88,98 IVNumber of tools: 6 St.Bore: 50 mmLeitz window tool set for IV 68/78/88/98 (timber) and IV 68/88 (timber-aluminum),plus entrance doors and lift-and-slide systems--------------------------------------Timber:Leitz IV 68/78/88/98 (timber)Timber-Aluminum:Leitz IV 68/88, entrance doors, and lift-and-slide systemsTools were used on a Weinig Unicontrol 6 NC (with stepless vertical adjustment)--------------------------------------Price for the above-mentioned tools available upon request!--------------------------------------(Technical specifications provided by the manufacturer – subject to change/no guarantee!)All prices are net, plus statutory VAT.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Línea de conformado y prensado para la producción de tableros de aglomerado de 3 capas. - Dimensiones netas máximas de tablero 29355 x 2500 mm. - Espesor neto de los tableros desde 4 mm hasta 40 mm. - Densidad aproximada del tablero 700 kg/m³ (para tablero de espesor 16 mm). - Capacidad de producción: 29.40 m³/hora (para tableros 29355 x 2500 x 16 mm). - Incluye: • Sistema de preparación y gestión de colas. • 2 encoladoras de partículas para las distintas mezclas. • Sistema de formación SCHENK: año de fabricación 1988 (actualizada en 2001), con 3 estaciones de formación (para las capas superior, inferior y relleno), longitud 28000 mm. • Pre-prensa continua DIEEFFENBACHER con estación de corte a la salida: año de fabricación 1989 (actualizada en 2001), velocidad máxima de pre-prensado 350 mm/seg, longitud 28000 mm. • Banda tr ...

- Descortezadora rotativa de tambor para troncos de madera. - Construcción robusta soportada sobre ruedas. - Evacuación de corteza por ranuras longitudinales en el tambor. - Longitud del tambor aprox. 17000 mm. - Diámetro del tambor aprox. 3100 mm. - Incluye tolva de carga inclinada con cinta de arrastre. - La cinta transportadora de salida NO está incluida. - Esta máquina está parada desde 2018. En el momento del paro funcionaba correctamente. - Condiciones de funcionamiento de esta máquina: sin comprobar. - Venta EX WORKS. Desmontaje, desconexión, carga y retirada a cargo del comprador, quien deberá cumplir la normativa vigente en materia de prevención de riesgos laborales, seguridad y salud en trabajos industriales, aportando la documentación, seguros y acreditaciones necesarias. Auction-ID: A7-49881-3

Number of spindles: 4 St.Number of tools: 11 St.Spindle diameter: 50 mmSpindle length: 285,125 mmlength: 4000 mmwidth: 2000 mmheight: 2200 mmWeinig Univar 10/3 folding machine---------------------------------For milling around windows, doors and the like with unevencircumferential profiles. Machine suitable for wood thickness 68 to 92 mmTime required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.The available tool positions are selected using a selector switch on the control panelretrieved.Machine with 3 hydraulically controlled right precisionLifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindleThe spindle stroke takes place in a U-movement, so that the opening is possible for short partsThe milling stop remains as small as possible. Spindle stroke horizontally fineAdjustable for both tool positions from the operator side.Central lubrication f ...

Number of motors: 1 Stück0: 2500 mmControl: nein Hecht ES 350 single-sided glazing bead saw--------------------------------------Pneumatic pivoting against fixed stops.45º/ 90º/ 135ºwith pneumatic sawblade feedpneumatic tilting via manual tilt stopwith machine base, pneumatic clampingHM sawblade 350 x 3.0/2.2/30 Z 100Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm1.5 m touch stop1.5 m support with support3 m touch stopSupport extension from 1.5 m to 3 m with supportTable inserts grooved for rebated glazing beadsHECHT ASB manual length stop with digital display, 2,500 mmWith dust extraction unit(Technical specifications according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cut-off saw: 3 KWSpindle diameter: 50 mmSpindle length: 300 mmNumber of tools: variabel St.Control: CNC Dimensions (L/W/H): 2500x1700x2100 mmweight: 1700 kgHABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindlesand Automatic Roller Table----------------------------------------------Crosscut Saw---------Spindle Positioned at the TopThree-Phase Motor 3 KWSpindle Diameter 30 mmSpeed 2800 rpmSaw Blade Diameter 400 mm Automatic Brake with Speed Monitoring Stepless Saw Positioning with Siko Display Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle2 Slotting Spindles 50 mm Diameter-----------------------------------Power 2 x 7.5 KWSpeed 4200 rpmSpindle Diameter 50 mmMax. Tool Diameter Approx. 360 mmUsable Length 300 mm Both slotting spindles can be positioned via ball screw Freely programmable 19 programs, display with function keys Protective and extraction h ...

Working width: 230 mmWorking height: 15-120 mmNumber of spindles: 2 St.Weinig Hydro Planer Type Uniplan 23-------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024.Description:For two-sided horizontal woodworking with two working spindles.Spindle arrangement: horizontal, bottom and top.The two horizontal spindles are equipped with hydraulically tensioned counterbearingswithout axial adjustment. Built-in straight jointers on both spindleswith automatic stone feed, remotely controlled with the hood closed.Machine with continuous, chainless feed, equipped with rubber rollers.Electric up/down adjustment of the spindles according to a mechanical digital display(SIKO).On/off switch for limiting the up/down adjustment. Feed roller pressurepneumatic. Stops and table tops are not adjustable. Machine withsteel table tops.Machine with full ...

Working width: 4000 mmWorking height: 2550 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5.000 x 1.200 x 2.900 mmloading dimensions L x W x H: 5.000 x 1.200 x 2.900 mmS+S Bavaria 2000 L window frame and sash pressThe press was partially reconditioned at our warehouse, immediately available!Technical specifications:- Working dimensions: 4000 mm x 2550 mm (length x height)- Abutment and pressure plate depth: 100 mm- Automatic press cycle for mortise and tenon corner joints- hand control for manual pressing mode- 1 central pressure beam (accommodates heights up to 2550 mm)- 1 transverse pressure unit- 1 shut-off valve for the 3rd vertical cylinder- 1 shut-off valve for the upper horizontal cylinder- 3 controls for angled window processing (vertical cylinders)- 3 attachable pivoting pressure plates for pressing angles up to 60 degrees- 2 extensions for pivoting pressure plates (for triangu ...