S 24.10e EUREC S 24.10e single shaft

EuRec S 24.10 E, Year 2019, The shredder consists of a separate shredding unit and a drive unit, connected by electrical cables and hydraulic pipes., Separate drive unit with cooling system, Maximum distance between the shredder and the drive unit: 6 m; longer distances available as an option., Transmission: Electrohydrostatic, With automatic reversal of the shredding shafts in the event of overpressure caused by foreign bodies, Weight, Shredder weight: approx. 18,000 kg, Drive unit, Drive with 2 Siemens electric motors - 132 kW each, Power consumption: approx. 270 kW, Start control with soft start, Connecting cables: 2 cables with 4 wires each - wire cross-section between 70 and 300 mm², Power-controlled hydraulic system, The hydraulic motors rotate at lower speeds as the load increases, thus transmitting higher torque to the shredder shafts., Continuously variable shredder shaft speed adjustment from 0 to 30 rpm., The rotor speed is infinitely variable., This allows the shredders performance to be adapted to the subsequent operators., Robust 3-stage planetary gearbox., Rated output torque: > 240,000 Nm., Feed hopper: approx. 3,600 x 2,450 x 1,400 mm., Bolt-on, removable for transport., Paint finish:, RAL 1005 Honey Yellow (or RAL of your choice)., Automatic shaft bearing lubrication., Documentation:, Operation and maintenance manual in Italian., CE certification., Electrical and control panel:, The control panel is located next to the machine., Made by RITTAL, dust-proof and fully wired., Main safety switch., Fan-assisted air exchange., Emergency button., Ammeters for electrical consumption., With buttons and selectors for all functions., Operation and service monitoring via programmable logic control, Error messages and service reminders are clearly displayed on the display;, Machine adjustment to the material being shredded via 3 selectable and freely modifiable programs;, Optimal cleaning effect of the shredding shafts thanks to adjustable forced reversal, independent of pressure and its duration., Pressure-dependent rotor reversals allow the number of reversals per unit of time to be adjusted and the machine to be stopped if contamination is detected;, The direction of rotation of the shredding shafts can be preselected (different materials are shredded better with the shafts rotating forward, while others are shredded better with the shafts rotating backward)., Single-channel emergency stop circuit, Remote control, For remote control of machine functions, Patented pair of shredding shafts, For output grain sizes up to approx. 250 – 300 mm, Shredding occurs in both directions of travel, Patented shredding/scraping side combs:, Very robust, made of special, high-strength, wear-resistant steel., With shredding, scraping, and self-cleaning shaft functions., Multiple labyrinth seals on the shaft ends, Prevents the intrusion of foreign matter into the shaft bearings, Conveyor belt for bidirectional evacuation and control, Shredder elevation of approximately 600 mm for the double belt, Reversible horizontal belt, Inclined belt, Screen with belt control
seller offer No. resale GEET105