fresadoras usadas para la venta (2,401)

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps-Clamping tool: cranked clamps, 3 pieces-Clamping iron: 188/60/H55 mm-Groove: 89 x 23 mm-Price/Delivery: complete-Transport dimensions: 188/180/H55 mm-Total weight: 5.7 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping table: milling machine table-Table surface: 600 x 220 mm-Y-axis: 130 mm movable, hand crank with fine adjustment, see photos-T grooves: groove width 12 mm, groove spacing 45 mm-Total dimensions: 690/490/H300 mm-Weight: 72 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps-Clamping tool: cranked clamps, 4 pieces-Clamping iron: 160/50/H48 mm-Groove: 50 x 19 mm-Price/Delivery: complete-Transport dimensions: 160/200/H48 mm-Total weight: 5.3 kg

clutch, power clutch, gear clutch, transmission clutch-Clutch: Gear clutch with duo sealing rings-Hole shaft: Ø 125 x 125 mm-Flange: bolt circle Ø 265 x 13 mm-Dimensions: Ø 294 x 125 mm-Weight: 27,1 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks-Step block: Universal clamping pad set in wooden box-Width: 30 mm-Design/Dimensions: see photos-Dimensions box: 445/275/H75 mm-Total weight: 15 kg

turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table-Manufacturer: Scherer, indexing table from vertical lathe VDZ 80 DS with accessories-Servo motor: Siemens 1FK7042-Individual components/accessories: see photos-Transport dimensions: 1200/720/H620 mm-Weight: 198 kg

Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table-Clamping table: Drilling machine table Milling machine table T-slot table-Table surface: 800 x 550 mm, height 195 mm-Groove width: 28 mm, groove spacing 250 mm-Dimensions: see photo technical drawing-Total dimensions: 800/550/H195 mm-Weight: 630 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 143 mm-Dimensions: see photo technical drawing-Number: 2x clamps available-Price: per piece-Dimensions: 166/57/H115 mm-Weight: 1.7 kg/pc.

clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping table: Milling machine table swiveling-Axles: adjustable with hand crank, see photos-Dimensions total: 530/350/H450 mm-Weight: 56 kg

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley-Toothed disk: from a Kern CD 480 lathe-Type: P60-5M-Mount: hollow shaft Ø 25 mm-Dimensions: Ø 103 x 77 mm-Weight: 2.9 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps-Clamping tool: clamping iron-Bore: Ø 18 mm-Dimensions: 106/53/H111 mm-Weight: 1.7 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps-Clamping tool: clamping iron-Bore: Ø 17 mm-Groove width: 28 mm-Dimensions: 109/82/H113 mm-Weight: 1.1 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories-Clamping tool: different versions, 5 pieces-Groove width: 14 mm-Dimensions: see photo techn. drawing-Price/delivery: complete-Total weight: 9.9 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps-Clamping tool: cranked clamp, 2 pieces-Clamping iron: 160/60/H55 mm-Groove: 55 x 23 mm-Slot nut: slot width 21/35 mm-Price/Delivery: complete-Transport dimensions: 160/120/H150 mm-Total weight: 4.9 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 95 mm-Dimensions: see photo technical drawing-Dimensions: 109/57/H157 mm-Weight: 1.2 kg

Universal milling head, milling holder, milling extension, angle milling head -Spare part from a R

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 83 mm-Dimensions: see photo technical drawing-Dimensions: 100/72/H83 mm-Weight: 1.2 kg

clutch, power clutch, gear clutch, transmission clutch-Clutch: Gear clutch with duo sealing rings-Hole shaft: Ø 125 x 125 mm-Flange: bolt circle Ø 265 x 13 mm-Dimensions: Ø 294 x 125 mm-Weight: 26.8 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate-centric: exciting-Chuck size: Ø 242 mm-Rezess: Ø 190 mm-Hole circle: Ø 215 mm-Weight: 26.4 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 95 mm-Dimensions: see photo technical drawing-Dimensions: 110/60/H98 mm-Weight: 1.3 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 208 mm-Groove width: 40 mm-Dimensions: see photo technical drawing-Dimensions: 230/80/H50 mm-Weight: 4.3 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 166 mm-Groove width: 32 mm-Dimensions: see photo technical drawing-Dimensions: 185/85/H47 mm-Weight: 4.1 kg

Fabricante: Kennametal Diámetro: 500 mm Número de dientes: 62 Cantidad disponible: 2 uds.

x-travel: 300 mmy-travel: 160 mmz-travel: 340 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 40 - 2000 U/minfeeds: 5 - 500 mm/minrapid traverse: 1,2 m/mintotal power requirement: 1,9 kWweight of the machine ca.: 0,7 t- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.750 mmy-travel: 1.400 mmz-travel: 550 mmControl: SIEMENS Sinumerik 840D sl Working area: : surface area: 1.000 x Ø1.200 mmmax. workpiece weight: kgFeeds: : X-, Y- and Z-axis, stepless: mm/minrapid travel x/y/z: mm/min: : Constant Power at 100 % ED: 18 kWtorque: 80 Nmturning speeds: 18.000 U/min: +/185° Direct Drivetool taper: HSK A63 tool changer: 60 fachdimensions of the machine ca.: 6,2 x 3,8 x 4,3 mtotal power requirement: 50 kWweight of the machine ca.: 20 tEquipment and accessories• Compact portal milling machine STINGER180 - Installation without contoured foundation• CNC control Siemens SINUMERIK 840D solution line• TULCE HSK-63A head with integrated, direct-driven A-axis• Stepless and endlessly rotatable milling table Ø1,200x1,000mm• Omlat spindle, max. speed 18,000 min-1• Axis drives via precision ball screws and digital servomotors ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock CoverAir coolant internal (through spindle centre)Air Coola ...

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,0 ...

x-travel: 15000 mmy-travel: 3000 mmz-travel: 1500 mmspindle turning speed - stepless: 7000 U/minspindle motor: 42 kWfeeds longditudinal/cross/vertical: 15000 mm/minrapid motion -longitudinal/cross/vertical: 35 m/minno. of tools in the magazine: 80 Stückcontrol: HEIDENHAIN TNC 530 total power requirement: 90,3 kWweight of the machine ca.: - t- CNC control HEIDENHAIN iTNC 530- Automatic milling head 0.001 ° X 0.001 °- Spindle extension 400mm & 600mm- Head mounting station- Hydrostatic boring mill table 2500 x 2000mm, 30t- Panel field- ATC 80-fold (ISO 50)- Spindle cooling: (inside) 40bar, (outside) 4bar- Chip conveyor- Coolant system with paper belt filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.