máquinas de laca usadas para la venta (535)

Dimensiones (L/P/H): 1624x950x2345 mmPeso: 0 kgConsumo total de potencia: 1,5 kWLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at mach ...

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electric e ...

Manufacturer: Purete, Type: PRT-I3613, Year: 2020 neu, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Channel length in mm: 6.000, Revisionsklappen: yes, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Conveyor lenght mm: 6.000, Feedin speed m/min: 0 - 20, Rod transportation: yes - 38,7 mm, 1st Damper register kW: 36, Electrical power consumption kW: 44, FREE TEXT: Heizung über Elektro - auf Anfrage über Wasser und Öl möglich, Year :NEU

Manufacturer: Purete, Type: PRT-L1106, Year: 2020 neu, Control: HMI, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 2 - 100, Working widht max mm: 620, Operating side: rechts / links, Working height: 880, Feeding speed min/max: 2 - 80, Required space L x W x H mm: 2.800 x 2.200 x 1130, FREE TEXT: höherer Vorschub optional, Year :2020 neu

Manufacturer: Hübner Airlessgerät, Type: HP 4/32 RF, Transmission ratio: 30:1, Volumenstrom Doppelhub ccm 2: 27, Volumenstrom Doppelhub ccm 2: 27, Fördermenge: 27 m³, Luftverbrauch bei 6 bar: 8, Compressed air bar max: 256,

Manufacturer: Cefla Rotorstain, Type: Rotor, Year: 2005, Control: Cefla, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, work piece detection: yes, Conveyour system: Band, Spraying stations: 16, Schnellwechselsystem : yes, Gun carrier: 16, Pumps: 2, Laquer system - airless: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Superfici UV Trockner, Work piece width min-max mm: 10-1300, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3+1, kW power all lamps: ca.50, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, Conveyor lenght mm: ohne Transport,

Manufacturer: Bürkle Lackauftragsmaschine , Type: DAL 1, Year: 1989, Control: hand, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-120, Operating side: rechts, Working height: 890 +-, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 0,75, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Durchmesser Auftragswalze mm: 238, Dosierwalze verchromt: yes, Attachment bracket roller: yes, rbakel: yes, Year :1989

Manufacturer: Cefla, Type: TLF/BB3-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 4, Reflektor von oben abnehmbar: yes, Lamps inclined installation: yes, Automatische Werkstückerkennung : 120, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: 2500, Position of lamps: 980, Power per lamp watt UV: 5-25, Leistung Abluftventilator kw: ca. 0,75, Conveyor lenght mm: 80, Max. air temperature: 57,1, Year :1999

Manufacturer: Hymmen, Type: SGC, Year: 1999, Control: Hymmen, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: 0,75, Glättewalze mm: yes, Glättewalzengeschwindigkeit: 5-25, Year :1999

Manufacturer: Rippert, Type: IR Vorwärmodul, Year: 2005, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Number of lamps: 6, Position of lamps: gerade, Power per lamp: ca.3, od distance mm: ca.80, Feeding speed m/min: 3-15, FREE TEXT: Lampen müssen erneuert werden, Year :2005

Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 35-40, Approx. thickness of rubber coating in mm: 15, Stahlkerndurchmesser ca. mm: 200, Diameter of neck: 40, Total lenght mm: 1970, Rubber coating defective: no,

Manufacturer: Cefla Sorbini DMC, Year: ca. 1990, Work piece width min-max mm: 1300, Abstapelanlage Typ: no, Roller coater line: yes, Sanding machines (number): 2, Design sanding machine no 1: Quer Längs Längs, Stain rollers qty.: 2, Laquer roller coaters (number): 2, 2 UV lamps qty.: 1, UV dryers - 3 lamps (number): 2, Year :ca. 1990

Manufacturer: Bürkle 1416 mm shore 55 gebraucht muss geschliffen werden Type: Lack-Ersatzwalzen, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca 55, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, EPDM: yes, Can be reground: yes, Application roller rubber coating mm: ca 20,

Manufacturer: Cefla, Type: Rotostain, Year: 2005, Control: yes, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Pistolenantrieb: 16, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Control: Cefla, Work piece width min-max mm: 1350, Durchlassbreite min-max mm: 1350, Working height: links, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): yes, Auftragseinheit 1 shore härte: yes, Auftragseinheit 1 : yes, Gummierung mm: 5-12, Shore härten möglich: yes, Shore: möglich, Durchmesser Auftragswalze mm: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Manufacturer: Bürkle Lackauftragswalze shore 60 Länge 1336 mm NEU, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.20,

Manufacturer: Cefla, Type: TLF/B1-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 2, Drive power kW: ca. 0,75, Electrical power consumption kW: 20, Year :1999

Sorbini: yes, Rubber coating length cm: 1310,

Manufacturer: Bürkle Dosierwalze 1415 mm 174 mm D , Bürkle: yes, Roller rubber coating: no, Rubber coating length cm: 1410, Chromium-plated dosing roller mm: 174,

Manufacturer: Bürkle Ersatzwalze 1416 mm shore 30 prüfen muss geschliffen werden, Bürkle: yes, Roller rubber coating: 30, Rubber coating length cm: 1410, Shore Härte: 25, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, Wedge follower: yes, Rubber coating defective: no, Application roller rubber coating mm: ca. 240,

Manufacturer: Cefla, Type: TLF/BB3-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Working widht max mm: 1400, Number of lamps: 4, kW power 1 lamp: ca.40, Reflektor von oben abnehmbar: 4, Lamps inclined installation: yes, Adjustable: 120, Elektronische Leistungregelung: ca.4000, Power per lamp watt UV: 5-25, Abluftmenge cbm/h: Stange, Leistung Abluftventilator kw: ca. 0,75, Conveyor lenght mm: 80, Max. air temperature: 57,1, Year :1999

Manufacturer: Bürkle Lackauftragswalze 1415 mm shore 60 25 mm Gummi , Bürkle: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Schuko, Year: ca.1990, Control: yes, Supply air filter covers: 1, Heizmedium : Warmwasser, Splashback dry: yes, Length max mm: 3000, Width max mm: 1600, Number of spray booths: 1, Supply air system: yes, Hand spraying stations: 1, Absaugfläche m²: ca.4, Zuluftgerät kW Leistung 1: 89,6, Heating agent warm water: yes, Engine power kW: ca 4, Ceilings for incoming air: 1, Year :ca.1990

Manufacturer: Purete, Type: PRT-I1606, Year: 2020 neu, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300 , Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 18, Position of lamps: gerade, od distance mm: 38,7, Working hight approx mm: 900, Feeding speed m/min: 5 - 20, Rod transportation: yes, Length mm: 6.000, Drive power kW: 1,5, Conveyor lenght mm: 6.000, Required space L x W x H mm: 6.000 x 1.850 x 1.750, Year :2020 neu

Manufacturer: Sorbini, Type: T/20-SP, Year: 1999, Working width min-max mm: links, Arbeitshöhe min- max mm: yes, Durchlassbreite min-max mm: 5-25, Operating side: 15, Working height: EPDM, Lackauftragseinheiten: yes, Spachteleinheiten: yes, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: 5-20, Auftragswalzengeschwindigkeit m/min min-max: yes, kW - Leistung Auftragswalze: 1350, Stärke Gummierung min-max mm: 5--25, Stärke Gummierung mm: yes, Dosierwalze verchromt: yes, Reverse und Gegenlauf: Band, Glättewalzengeschwindigkeit: membrane, Year :1999

Manufacturer: Venyeskob, Type: Mikrowellen Trockner, Year: 2007, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Length mm: ca 6.774, Channel length in mm: 6000, Revisionsklappen: yes, Kanaltemperatur Grad: ca 30°C, Umluftleistung m³/h: 3.000, Ex geschützt: no, Working widht max mm: 1300, Working height in mm: 95, Conveyor lenght mm: 6800, Through running hight mm: 100, Belt conveyor: yes, Electrical power consumption kW: 13, Year :2007