máquinas de soldar usadas para la venta (1,644)

La máquina de soldadura inversora se utiliza para soldadura MIG/MAG. La máquina de soldar utiliza un IGBT de alta potencia para transmitir frecuencias de 50/60 Hz a 20 kHz. Las ventajas de la máquina de soldar incluyen, entre otras, el ahorro de energía y la posibilidad de corrección automática de pulsaciones de voltaje, formación de chispas bajas y alto ciclo de trabajo Auction-ID: A7-50799-286

Tensión de entrada: 230V~50Hz Rango de corriente de soldadura: 20-330A Voltaje sin carga: 60V Consumo máximo de corriente: 55A Consumo efectivo de corriente: 45A Ciclo de trabajo: 40% 330A, 100% 202A Tamaño del electrodo: 1,6-4,0 mm Auction-ID: A7-50799-92

Tensión de entrada: 230V~50Hz Rango de corriente de soldadura: 20-330A Voltaje sin carga: 60V Consumo máximo de corriente: 55A Consumo efectivo de corriente: 45A Ciclo de trabajo: 40% 330A, 100% 202A Tamaño del electrodo: 1,6-4,0 mm Auction-ID: A7-50799-292

La máquina de soldadura inversora se utiliza para soldadura MIG/MAG. La máquina de soldar utiliza un IGBT de alta potencia para transmitir frecuencias de 50/60 Hz a 20 kHz. Las ventajas de la máquina de soldar incluyen, entre otras, el ahorro de energía y la posibilidad de corrección automática de pulsaciones de voltaje, formación de chispas bajas y alto ciclo de trabajo Auction-ID: A7-50799-86

Máquina de soldadura inversora. Adecuada para soldar con electrodos recubiertos. Apta para su uso en entornos de alto riesgo. Auction-ID: A7-50799-271

Voltaje 220V, inversor, corriente de salida 60 A máximo, nunca usado Dimensiones totales: 500 x 200 x 200 mm Peso: 2 kg Auction-ID: A7-50798-294

Máquina de soldar con alambre electrónico, modelo mig 400-pl, nunca utilizada Dimensiones totales: 1200 x 800 x 1500 mm Peso: 120 kg Auction-ID: A7-50798-255

Máquina de soldar con alambre electrónico, modelo MIG 400-PL, nunca utilizada Dimensiones totales: 1200 x 800 x 1500 mm Peso: 120 kg Auction-ID: A7-50799-305

Tensión de entrada: 230V~50Hz Rango de corriente de soldadura: 20-330A Voltaje sin carga: 60V Consumo máximo de corriente: 55A Consumo efectivo de corriente: 45A Ciclo de trabajo: 40% 330A, 100% 202A Tamaño del electrodo: 1,6-4,0 mm Auction-ID: A7-50799-192

Máquina de soldar con alambre electrónico, modelo MIG 400-PL, nunca utilizada Dimensiones totales: 1200 x 800 x 1500 mm Peso: 120 kg Auction-ID: A7-50798-65

La máquina de soldadura inversora se utiliza para soldadura MIG/MAG. La máquina de soldar utiliza un IGBT de alta potencia para transmitir frecuencias de 50/60 Hz a 20 kHz. Las ventajas de la máquina de soldar incluyen, entre otras, el ahorro de energía y la posibilidad de corrección automática de pulsaciones de voltaje, formación de chispas bajas y alto ciclo de trabajo Auction-ID: A7-50799-186

Auction-ID: A1-51172-146

Caudal nominal de aire: aprox. 1.200 m³/h Caudal máximo de aire: aprox. 1.500 m³/h Área de filtro: aprox. 15 m² Filtración mecánica de varias etapas Filtro principal de alta eficiencia Indicador de incrustación del filtro Brazo de succión articulado giratorio Campana extractora giratoria de 360° Control remoto de encendido/apagado Ventilador eléctrico integrado Montaje fijo en el soporte Auction-ID: A1-51172-145

Área de filtración: 25 m² Caudal máximo de aire con filtro de carbón: 2 x 900 m³/h Caudal máximo de aire sin filtro de carbón: 2 x 1.100 m³/h Flujo máximo de aire con un solo brazo: 1.500 m³/h Número de brazos de extracción: hasta 2 Potencia del ventilador: 2,2 kW Fuente de alimentación: 400 V trifásico Frecuencia: 50 Hz Número de etapas de filtrado: 3 1ª etapa: separador con paraguachispas 2ª etapa: prefiltro de malla de aluminio 3ª etapa: filtro de fibra de vidrio fina Clase de filtración con filtro fino: F9 / 95% ASHRAE / BIA-C Caída final de presión del filtro: 800 Pa Vacío máximo: 4.000 Pa Indicador de ensuciamiento del filtro: manómetro de 0 a 2.000 Pa Peso: aprox. 89 kg Altura: aprox. 1.175 mm Ancho: aprox. 506 mm Profundidad: aprox. 750 mm Nivel de ruido: < 70 dB(A) Temperatura máxima permitida: 70 °C Humedad relativa máxima: 90% Auction-ID: A1-51 ...

Usé una máquina de soldar hojas de sierra de cinta para soldadura autógena (a tope) de hojas de sierra de cinta. Marca, modelo exacto y especificaciones técnicas detalladas no confirmadas para esta unidad específica — por favor contáctanos para más detalles. Auction-ID: A7-50988-8

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width  ...

table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 1049 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! SPECIAL OFFER SIEGMUND Retro Welding Table 2400x1200x200, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct Description- Table dimensions: 2400x1200x200 mm- High-quality S355J2 N steel + with plasma nitriding- Material thickness: approx. 24.5 - 27 mm- Hole diameter: 28 mm- Holes arranged in a 100x100 mm grid- Corners, edges, and holes chamfered at 45°- Side panel height: 200 mm- Side panel holes in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust, scratches, and welding spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / dimensions 2400 x ...

table length: 400 mmtable width: 400 mmtable load: 250 Kgtable diameter: 400 mmswivelling range: 135 Gradturning speeds: 0,2 - 3,0 stufenlos U/mintotal power requirement: 0,3 kWweight of the machine ca.: 0,115 tdimensions of the machine ca.: 1,2 x 0,8 x 1,5 mWelding turntable with- footswitch- manual tilt/swivel- remote control- infinitely variable speed- machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chucking diameter: 315 mmtable load: 300 Kgswivelling range: Gradturning speeds: 0,1 - 4,0 U/minconnected load frequency: 220 Vbore diameter: 63 mmweight: 0,09 tDimensions (LxWxH): 0,8 x 0,6 x 1,2 mWelding turntable incl.- 315 mm chuck- 3-axis torch holder- Cutting torch- Machine base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1050 mmheight: 1450 mmweight of the machine ca.: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mmheight: 650 mmtotal power requirement: 3,7 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 800 x 330 x 650 mmTechnical SpecificationsContinuously adjustable range [A] 35â270Duty cycle (DC) at Imax. (10 min) [%] 30 (40)Welding current at 100% duty cycle [A] 160Mains connection [V] 3/PE 400Continuous power at 100% duty cycle [kVA] 5.5Protection class IP 21Included accessories: - Hose set- Pressure regulator- Ground cable- Basket coil adapterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 900 mmweight of the machine ca.: 95 kgdimensions of the machine ca.: 900 x 450 x 850 mmTechnical SpecificationsContinuously adjustable range [A] 35â250Duty cycle (DC) at Imax. (10 min) [%] 40Welding current at 100% duty cycle [A] 170Mains connection [V] 3/PE 400Continuous power at 100% duty cycle [kVA] 5.5Protection class IP 21Included: - Hose set- Pressure regulator- Ground cable- Spool adapterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1550 kgYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 15 mmMaximum Chamfer Lengths / Maximum Chamfer HeightsMaximum chamfer length for steel 400 N/mm² 15 mmMaximum chamfer height for steel 400 N/mm² 10.6 mmMaximum chamfer length for steel 600 N/mm² 9 mmMaximum chamfer height for steel 600 N/mm² 6.4 mmMaximum chamfer length for steel 800 N/mm² 6 mmMaximum chamfer height for steel 800 N/mm² 4.2 mmRadiiMinimum radius 55 mmGeneralWorking speed (max.) 2 m/minRated power consumption 2600 WSheet metal thickness 4 mm - 160 mmDimensionsLength 554 mmHeight 361 mmWeightWeight 16.5 kgTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 25 mmSheet thickness: max. 25 mmMax. bevel length: 10 mm (for steel with a tensile strength of 400 N/mm²)Bevel angle: 30°Power: 2,000 WVoltage: 220 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: 3000 mmtable width: 1500 mmtable height (lateral area): 200 mmweight: 1549 kgdimensions of the machine ca.: 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! SPECIAL OFFER SIEGMUND Retro Welding Table 3000x1500x200, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct Description- Table dimensions: 3000x1500x200 mm- High-quality S355J2 N steel with plasma nitriding- Material thickness: approx. 24.5-27 mm- Hole diameter: 28 mm- Holes arranged in a 100x100 mm grid- Corners, edges, and holes chamfered at 45°- Side panel height: 200 mm- Holes in side panels arranged in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust, scratches, and weld spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / Dimension ...