máquinas rectificadoras usadas para la venta (2,180)

width of the strips: 150 mmband length: 2000 mmband speed: 1400 / 2800 U/mintube diameter: 40 - 140 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request- Machine video - identical machine -https://www.youtube.com/watch?v=LXP09NFTnlw&t=1sThe FALKEN PN 38/140 is a multifunctionalgrinding machine for grinding pipe and profile endsEquipment:- robust electro-motor pipe profile grinding machine- enables notches up to an angle of 50°- large-dimensioned surface grinding surface with protective cover- 2x belt speeds- control panel, front left - including emergency stop button- grinding belt can be replaced quickly and easily- vice movement to the right - left, forwards & backwards possible- side grinding dust collection container- horizontal & vertical grinding alig ...

tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mmThe TUGRA TT 90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- easy manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 90.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 72.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 75 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks  ...

width of the strips: 150 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight of the machine ca.: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table-  ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 66.0 kgrange L-W-H: 1080 x 440 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table-  ...

drill diameter: 2.0 - 20.0 mmlip angle: 90 - 135 °turning speeds: 4800 U/minvoltage: 230 Voltengine output: 0.12 kWweight: 8.6 kgrange L-W-H: 285 x 130 x 170 mmThe handy DG 20 M drill grinding machine is ideal for grindingtwist drills made of HSS, cobalt and hard metal. Thanks to the adjustabletip angle of 90° to 135°, this model can be used universally for2-edged twist drills.Properties:- For grinding HSS and hard metal twist drills from 2 - 20 mm- ER 20 and ER 25 collets also enable clamping of intermediate sizes- Optimum grinding result thanks to the specially guided collet- Includes device for sharpening the drill tip- Universally adjustable tip angle from 90° - 135°- Fast and easy grinding processScope of delivery:- CBN grinding wheel- ER 20 collets, 3 - 12 mm 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm)- ER 25 collets, 14 - 20 mm 7 pieces (14 / 15 / 16 / 17 / 18 ...

width of the strips: 150 mmband length: 2000 mmrevolutions per minute: 3000 U/minengine output: 4.0 kWweight: 93.0 kg including machine baseHigh-performance grinder for standard grindingapplications for extra wide workpieces.Furnishing:- High-performance belt sander with a stable machine base- Constant speed with high cutting performance thanks to the robust 4 kW motor- Very good price-performance ratio- Removable chip catcher- Patented strap tensioning system- Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: 15 + 30 m/seltube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 2 x 75.0 mmmotor speeds:: 1420 / 2660 Upm.face grinding attachment: 400 x 100 mmtotal power requirement: 2.5 / 3.3 kWweight of the machine ca.: 148 kg.range L-W-H: 750 x 1400 x 1200 mmFurnishing :- Constant belt tension through spring-loaded tensioning device- Standard with cylindrical grinding device- for grinding diameters of diam. 20-76 mm- Quick and easy setting of the desired grinding angle- Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt- Large plan grinding surface with protective cover- Slow belt speed (15 m / sec.)- ideal for grinding stainless steel and aluminum- User-friendly tape change, quick and uncomplicated- Quick and easy changing of the grinding rollers without tool ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...

width of the strips: 45.0 mmband length: 850 mmband speed: 8.0 m/sek.voltage: 230 Vtotal power requirement: 0.18 kW MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 250 mmgrinding wheel size: 250 x 25 x 20 mmturning speeds: 2850 U/minvoltage: 400 Vtotal power requirement: 2.0 kWweight of the machine ca.: 23.0 kg.dimensions of the machine ca.: 600 x 290 x 300 mmFurnishing:- Heavy design and high quality equipment- ideal for professional use- Ideal for matting, polishing- up to mirror-smooth surfaces of various materials- with the help of optionally available polishing discs and polishing pastes- Lockable ON-OFF switch according to IP54 with undervoltage release- Including motor with copper winding for a long service life- Standard with rubber feet for vibration-free work- Very smooth running thanks to balanced rotor with quality ball bearings- Elegant machine body made from high quality die-cast- Suitable for polishing metal, plastic and non-ferrous materialsScope of delivery:- Soft polishing pad- Hard polishing pad- Operating instruc ...

grinding width: 32.0 mmmax. dia. of grinding wheel: 250 mmgrinding wheel size: 250 x 32 x 32 mmturning speeds: 2850 U/minGrain size: K 36 / K 80 engine output: 1.5 kWvoltage: 400 Vweight: 30.0 kgrange L-W-H: 510 x 320 x 360 mmscope of delivery : - Grinding disc K 36- Finishing wheel K 80- Spark protection on both sides- workpiece supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt  ...

width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/secgrinding width: 75 x 430 mmengine output: 3.0 kWweight: 75.0 kg including machine baseFurnishing:- Powerful belt sander- modularly expandable, for the trade and for small series.- Can be expanded with additional modules- Speeds ideal for metalworking with 3000 / min- Height-adjustable surface grinding table for linear surface grinding- Removable chip catcher- Connection option for external suction- Working height individually adjustable- Patented strap tensioning system- Robust three-phase motor- Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3.0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mm- Machinevideo -https://www.youtube.com/watch?v=l-XFPai2BAAFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 300 mmband length: 2070 mmband speed: 7.0 m/secsurface of working table: 750 x 380 mmdiameter: 87.7 Führungsrollen mmengine output: 1.5 kWtotal power requirement: 400 Voltweight of the machine ca.: 88.0 kg.range L-W-H: 1050 x 600 x 400 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 usado: rectificadora cilíndrica interna • Fabricante: OVERBECK, Herborn • Modelo: 250 I-HA • Nº de fábrica: 261991 • Año de construcción: 1971 • Diámetro de sujeción: máx. 140 mm • Longitud del orificio rectificable: máx. aprox. 150 mm • Diámetro del orificio rectificable: máx. aprox. 0,8-80 mm Accesorios: sin husillo de rectificado interno sin motor de accionamiento para husillos de rectificado internos Poleas de desviación para accionamiento de husillo disponibles (La máquina fue instalada por el propietario anterior con un accionado por husillo neumático) Dispositivo de molienda plano, se puede girar a mano Tanque de refrigerante con bomba

Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.

Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulical ...

Número de máquina: 20932 Voltaje de funcionamiento: 3 x 400 VAC Frecuencia: 50/60 Hz. Corriente nominal: 46A 63A Voltaje de control: 200-240 VAC Potencia: 28 kW Control: Portaherramientas: Cabezal de molienda: Husillo de rectificado: El husillo se puede girar mediante el motor Potencia de accionamiento: 7,5 kW Velocidad: 0 – 9000 rpm Montura de lente: Diámetro del disco: Número máximo de rebanadas: Viajar: X: 380 mm Y: 280 mm Z: 280 mm Alimentar: Ejes X e Y: 20000 mm/min Eje Z: 10000 mm/min Ejes giratorios: Designación: eje C Ángulo de giro: 340 Alimentación: máx. 66/s Eje: Eje A: Rotación sin fin Alimentación: máx. 167/s Incluye refrigeración por aceite y sistema de refrigeración del fabricante ARO Incluye varios accesorios de máquina a juego, como portaherramientas, líneas de refrigerante y otros dispositivos de sujeción

x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ø de la rueda de copa: 180 mm Velocidad de la rueda de copa: 2900 rpm electr. Conexión: 380 V, 2900 rpm, 0,9 kW Dimensiones de la mesa vibratoria: 200 x 350 mm Mesa giratoria basculante La mesa giratoria gira +/- 20° Dimensiones: 750 x 350 x 1270 mm

Year: ca. 1970 magnetic plate size: 520 x 200 mmweight of the machine ca.: 1,4 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitud máxima de rectificado: 1000 mm, ancho máximo de rectificado: 500 mm, altura máxima de trabajo: 540 mm, carrera de deslizamiento del husillo de rectificado vertical / horizontal: 465 / 500 mm, rango de giro: 1800, superficie de sujeción de la mesa: 1500/450 mm, número de ranuras de sujeción: 3, distancia de las ranuras de sujeción: 125 mm, ancho de las ranuras de sujeción: 16H7 mm, recorrido transversal de la mesa: 500 mm, recorrido longitudinal de la mesa: 1000 mm. Longitud: 4650 mm, ancho: 2600 mm, altura: 2850 mm, peso: 7,1 t. Con tarjeta de máquina. La electrónica se renovó en 2022. Es posible realizar una inspección in situ.

spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...