máquinas rectificadoras usadas para la venta (2,477)

Núm. Inv. : 8568 Tipo:- Productor:- Creado: 1980, GO 2025 Parámetros: VAMOS 2025: Reemplazo completo del sistema eléctrico Adición al sistema de control NC Sustitución de sistemas hidráulicos (servoaccionamientos) Fortuna para el rectificado interior Mesa giratoria X Sustitución de piezas desgastadas Rectificando la cama

Key data: 400 mm, 1500 mm

Control Siemens ... Simatic OP17 Diámetro máx. de molienda ... 400 mm Longitud máx. de lijado ... 1500 milímetros Peso máx. de la pieza de trabajo ... 500kg Molienda interna Peso de la máquina ... 9200kg L x W x H ... 6220x2760x1950mm La máquina está en buenas condiciones, es posible probarla bajo energía.

Núm. Inv. : 8331 Tipo: SKR 1200-NC Productor: REFORMA Creado: 1995 Parámetros: Sistema de control: Siemens SINUMERIK Diámetro máx. de la pieza: 1200 mm Longitud máxima de la pieza de trabajo: 1000 mm Peso máx. de la pieza: 300 kg Velocidad máx.: 1000 1/min Longitud: 2500 mm Ancho: 1500 mm Alto: 1800 mm Peso: 4000 kg

Núm. Inv. : 8313 Tipo: 1500 R Productor: Kellenberger Creado: 1972 Parámetros: Dimensiones de la mesa: 2060 x 140 mm Diámetro máximo de molienda: 250 mm Longitud máx. de molienda: 1500 mm Longitud: 3270 mm Ancho: 1600 mm Alto: 1650 mm Peso: 3250 kg Equipo: DRO

Núm. Inv. : 8195 Tipo: AR35 Tipo 11 Productor: Reforma Creado: 1998 Parámetros: Sistema de control: Sinumeric 805 Imán: 3500 x 700 mm Altura de la máquina: 3000 mm Longitud de la máquina: 8800 mm Ancho de la máquina: 2250 mm Peso de la máquina: 28000 kg

Núm. Inv. : 7287 Tipo: KGS- 250 AHD Productor: KENT Creado: 2001 Parámetros: Longitud de la mesa de trabajo: 540 mm Ancho de la mesa de trabajo: 260 mm Peso de la máquina: 1300 kg

BN 102 C Productor Tos Columpio 280 mm Distancia entre centros 630 mm Ajuste de mesa cruzada 250 mm Ajuste longitudinal de la mesa 510 mm Ajuste del cabezal de fresado vertical 290 mm Peso de la máquina 1000 kg

Inv. Núm. : 5457 Tipo: UB 63/2000 Productor: HOL-MONTA Creado: 2001 Parámetros: Sistema de control: Kavalír Longitud máxima de molienda: 2000 mm Diámetro de molienda: 630 mm Carrera de punta: 375 mm Requisito de potencia total: 41 kW

Tipo SAXW 63/3000 Productor WMW Meuselwitz Año de fabricación 1979 Parámetros 63mm, 3000mm Ubicación Praha CZ Swing 750 mm Distancia entre centros 3000 mm máximo. peso de la pieza de trabajo 6000 kg Máquina apta para la modernización

Rectificadora cilíndrica blanca W11

Máquina de molienda superficial Okamoto ACC 450 BJ 1996

Operating hours unknown, an on-site inspection is possible.

Weight: approx. 3.5t, an on-site inspection is possible.

Grinding length: 3000mm, diameter: 500mm, grinding wheel: D750, workpiece drive, grinding wheel drive and hydraulic system retrofitted with speed control, hydraulic system retrofitted with an external hydraulic cooler, without coolant filtration system.

Ref. -No.: 10159Manufacturer: KELLENBERGERYear of construction: 1974Type of control: N/AControl: N/AStorage location: HalberstadtCountry of origin: SchweizGrinding Length: 1000 mmGrinding Diameter: 250 mm

Ref. -No.: 10396Manufacturer: KELLENBERGERYear of construction: 1988Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: SwitzerlandDistance between center: 600 mmCenter height (standard): 125 mmHeight of centers by lifting work blocks head and tailstock: 175 - 250 mmSwing diameter with lifting blocks max.: 350 - 500 mmTable swivel / each side: 10 °Dwell time of the table reversal: 0 - 5 SecDiameter / width / hole: 250 x 13 x 76 mmSpeeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 °Cross movement of the grinding wheel head: 285 mmQuickly pulling the wheel head back and forth: 40 mmIntermittent injection for each reversal of the table: 0,001 - 0,03 mm / diaMicro-corrector of the feed, 1 division of the dial: 0,001 mm / ØWorking speeds continuously adjustable (normal / special): 20-400/10-400 Max. Grinding le ...

Ref. -No.: 10545Manufacturer: OKAMOTOYear of construction: 1984Type of control: CNC-SteuerungControl: CNCStorage location: HalberstadtCountry of origin: JapanCross movement of the grinding wheel head: 340 mmWorkpiece spindle speed range: 1500 RPMMax. Grinding length: 600 mmPeripheral speed: 1800 m / sGrinding Width: 320 mmMax. Table longitudinal movement: 750 mmGrinding Wheel Hole Diameter: 127 mmDimensions Of The Machine Ca.: 2,63 x 1,88 x 1,85 mGrinding Wheel Width: 40 mmGrinding wheel dimensions: 355 x 38 mmMachine weight: 2200 kgGrinding wheel diameter (max.): 350 mmMax. distance table-spindle center: 500 mmTable Length: 605 mmTable Width: 300 mmT-Slots: 3 x 17 mmFurther information:The machine can be viewed under power by arrangement.

Suitable for regrinding and reworking of wood and metalworking tools of all kinds., Accessories:, Software package 1 (cylindrical tools sharp-edged, corner and full radius),, Software package 2 (conical-spiral tools sharp-edged, corner and full radius),, Software package 3 (drill and step drill),, Software package 16 (warming-up program),, Heli-Flute & Cone (span layout calculation program for cylindrical and conical cutters),, Pneumatic workpiece clamping,, Machine light,, Measuring probe,, Coolant tank 180 L., X-axis longitudinal movement: 400 mm, Y-axis vertical movement: 250 mm, Z-axis (transverse movement): 580 mm, Z-axis (lateral movement): 580 mm, C-axis swivel range: +/- 200°, Workpiece holder: ISO 50, Workpiece diameter: 260 mm, max. workpiece length: 270 mm, Max. Workpiece length: 270 mm, Grinding wheel RPM continuously adjustable: 0 - 10000 RPM., Grinding wheel drive power: 1 ...

Ref. -No.: 10617Manufacturer: KELLENBERGERYear of construction: 2001Type of control: KonventionellControl: n/aStorage location: HalberstadtCountry of origin: SwitzerlandDistance between center: 600 mmCenter height (standard): 125 mmHeight of centers by lifting work blocks head and tailstock: 175-250 mmSwing diameter with lifting blocks max.: 350 - 500 mmTable swivel / each side: 10 °Dwell time of the table reversal: 0 -5 SecDiameter / width / hole: 250 x 13 x 76 mmSpeeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mmQuickly pulling the wheel head back and forth: 40 mmIntermittent injection for each reversal of the table: 0,001 - 0,03 mm / diaMicro-corrector of the feed, 1 division of the dial: 0,001 mm / ØWorking speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mmFurther information:The machine can be ...

Ref. -No.: 10618Manufacturer: KELLENBERGERYear of construction: 2003Type of control: KonventionellControl: n/aStorage location: HalberstadtCountry of origin: SwitzerlandDistance between center: 600 mmCenter height (standard): 125 mmHeight of centers by lifting work blocks head and tailstock: 175 - 250 mmSwing diameter with lifting blocks max.: 350 - 500 mmTable swivel / each side: 10 °Dwell time of the table reversal: 0 - 5 SecDiameter / width / hole: 250 x 13 x 76 mmSpeeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 °Cross movement of the grinding wheel head: 285 mmQuickly pulling the wheel head back and forth: 40 mmIntermittent injection for each reversal of the table: 0,001 - 0,03 mm / diaMicro-corrector of the feed, 1 division of the dial: 0,001 mm / ØWorking speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Gri ...

Ref. -No.: 10619Manufacturer: KELLENBERGERYear of construction: 1997Type of control: KonventionellControl: n/aStorage location: HalberstadtCountry of origin: SwitzerlandDistance between center: 600 mmCenter height (standard): 125 mmHeight of centers by lifting work blocks head and tailstock: 175 - 250 mmSwing diameter with lifting blocks max.: 350 - 500 mmTable swivel / each side: 10 °Dwell time of the table reversal: 0- 5 SecDiameter / width / hole: 250 x 13 x 76 mmSpeeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° °Cross movement of the grinding wheel head: 285 mmQuickly pulling the wheel head back and forth: 40 mmIntermittent injection for each reversal of the table: 0,001 - 0,03 mm / diaWorking speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mmFurther information:The machine can be viewed ...

Ref. -No.: 10629Manufacturer: MICHAEL DECKELYear of construction: 2004Type of control: CNC-SteuerungStorage location: HalberstadtCountry of origin: GermanyWorkpiece Diameter: 250 mmMax. Grinding length: 340 mmMax. Workpiece Weight: 50 kgGrinding wheel diameter (max.): 150 mmTurning Speeds: 8000 RPMWorkpiece holder: SK 50 Further information:The machine can be viewed while powered up.

Área de molienda 500 x 200 mm, entrada vertical automática e imán SINUS

Cylindrical grinding machine manufactured in 1988. This KELLENBERGER 1000U features a center height of 175 mm and a distance between centers of 1000 mm. If you are looking to get high-quality grinding capabilities, consider the KELLENBERGER 1000U machine we have for sale. Contact us for further details.

This MIKRON BTM 2000 surface grinding machine was manufactured in 1994. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1,000 mm. The machine has a maximum table load of 3,500 kg and a spindle speed of up to 4,000 rpm. If you are looking to get high-quality surface grinding capabilities, consider the MIKRON BTM 2000 machine we have for sale. Contact us for further details.

This 3-axis WMW-Heckert SZ10-10-03 surface grinding machine was manufactured in 1989. It features a grinding length of 3,000 mm and a working width of 1,250 mm, with a maximum workpiece weight of 9,450 kg. The machine includes a clamping table surface of 3,230 x 1,000 mm and a permissible table load of 3,150 kg/m. If you are looking to get high-quality grinding capabilities, consider the WMW-Heckert SZ10-10-03 machine we have for sale. Contact us for further details.

Max. grinding length: 600mm, max. grinding width: 400mm, max. working height with new/worn grinding wheel: 550/650mm, max. workpiece weight: 300kg, clamping surface: 1020x300mm, number of T-slots: 1, T-slot width: 10mm, max. height above floor level: 1005mm, dimensions: 3140x2900x2140mm, weight: 2.9t, with electromagnetic chuck: 600x300mm and coolant system. An on-site inspection is possible.

Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible.

Diámetro máximo de la muela de rectificado: aprox. 250 mm, longitud máxima de rectificado: 800 mm, con placa de sujeción magnética, dimensiones: 800 x 400 mm, dispositivo de refrigerante, sistema de filtros de forro polar

A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.