mandrinadoras, centros de mecanizado usadas para la venta (535)

Auction-ID: A1-48377-10

Número de posiciones de herramienta: 30 Potencia del husillo: 14 kW Velocidad del husillo: 14.000 [rpm] Recorrido del eje A: 360 [°] (+/-) Precisión de indexación: 0,001 [°] Carrera: -10 / +95 [°] Precisión de indexación: 0,001 [°] Tipo de cambiador de herramientas : Brazo de carga Capacidad de carga de la mesa : 350 [kg] Auction-ID: A7-32339-12

Se requiere un depósito de 4125,00 € para presentar una oferta por este lote. Para obtener los datos bancarios necesarios para la transferencia, por favor contacte con el representante de la subasta en alessandro.icardi@surplex.com. Velocidad de avance rápida 42 m/min Velocidad de corte 1-8000 mm/min Cambiador de herramientas de 30 posiciones Diámetro máximo de la herramienta 80-125 mm Peso máximo de la herramienta: 8 kg Precisión de posicionamiento en el eje X 0,015 mm Precisión de posicionamiento Ejes Y/Z 0,010 mm Repetibilidad en el eje X 0,006 mm Repetibilidad en los ejes Y/Z 0,004 mm Mesas, utensilios y accesorios incluían ¡ADVERTENCIA! PARA EL TRANSPORTE, SE REQUIERE UN TRANSPORTE EXCEPCIONAL DENTRO DE LOS 3 METROS DE ANCHO Nota: No se ha verificado la funcionalidad de los productos. Se venden en su estado actual, sin garantía de funcionamiento. Cabe señalar que las ...

Ancho máximo de la pieza: 450 mm Grosor máximo de la pieza (altura): 300 mm Longitud máxima de la pieza de trabajo: 13.500 mm (13,5 m) Equipamiento: Cortador cilíndrico 350 mm x 120 mm Fresa de 160 mm x 40 mm - 2 piezas Hoja de sierra circular de diámetro 700 mm 2 piezas Cortador de cola de milano montado en el cortador cilíndrico Cortadora de cola de milano para fresa de extremo Fresa de 100 mm x 30 mm montada en unidad horizontal Loctc u e heymz Uhezoaa Unidad de Ranurado de Cadena Unidades de perforación: 1 vertical, 1 horizontal Marcador vertical de tinta en la toma de la máquina Auction-ID: A7-48720-1

Auction-ID: A1-48377-8

\"Perforación de conectores excéntricos / taladrado de banda de copa Sistema de fila de perforación de perforación de conectores / Perforación de bastidores 4 abrazaderas / 4 dispositivos de sujeción - mientras tanto + revisión y sellado. Datos técnicos: Motor: 1,5 kW Velocidad del husillo: 2800 rpm Paso máximo entre topes laterales: 750 mm Altura de trabajo: 850 mm Altura máxima de sujeción. grosor de la pieza: 100 mm Dimensión máxima de la posición de la fila de agujeros: 300 mm Diámetro del vástago de la herramienta: 10 mm Peso: aprox. 390 kg Requisito de espacio (profundidad, anchura, altura): 115x120x125 FIJANDO PRECIOS EN UNA CONDICIÓN PROBADA DE FUNCIÓN Y PARCIALMENTE REACONDICIONADA, ¡VENTA SIN GARANTÍA! Los datos se extraen del folleto/documentos del fabricante y pueden diferir de los valores reales. ATENCIÓN: se señala expresamente que  ...

Auction-ID: A1-48377-22

axis stroke (X,Y,Z): 6175x1550x300 mmNumber of spindle head vertical: 20 St.Number of spindles head horizontal: 10 St.Number of milling agregates: 1 St.Speed: 24.000 U/min.Capacity: 300 kg/hSawing unit: ja_yes 0Control: Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi-----------------------------------Machine already professionally dismantled and stored at our warehouse in Oberkochen:- 5-axis CNC processing center- Moving gantry machine (dual-drive gantry system)- 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm- 1 HOMAG Multi Processing UnitDrilling head with 30 spindles: V20 / H10 / S360° MPUMultiProcessingUnit with C-axis +/- 185°- 1 Chain tool changer, 30-position- Includes SL laser projector- Includes vacuum suction cups (as available)- Spare parts and accessories as shown in photos- Last HOMAG 5-axis service: 2024- Last HOMAG service: 2025- Pric ...

bore capacity in steel (diameter): 32 mmthroat: 232 mmbore stroke: 150 mmSpindle Speed: 115 - 2470 U/min.tool adaptor: MK 3 weight of the machine ca.: 280 kgdimensions of the machine ca.: 500 x 950 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 210 mm: total power requirement: kWweight of the machine ca.: 0.085 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50.0 mmthroat: 360 mmbore stroke: 225 mmmorse taper: 4 MKtable:: 570 x 480 mmthreading: M 42 Stahlturning speeds: 50-316 / 316-2200 U/minfeed: 0.08 - 0.50 mm/Ucolumn diameter: 180 mmdistance spindle /table: max. 580 mmdistance spindle/base plate: max. 1185 mmtotal power requirement: 3.0 kWweight: 630 kgrange L-W-H: 1020 x 750 x 2340 mmScope of delivery- Keyed drill chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1- Motorized table stroke- Coolant device- Touchscreen- Automatic tool ejector- Electromagnetic spindle feed- Thread cutting device- Initial filling with Shell Tellus 46- LED machine light- Digital speed display- Digital drilling depth display- Height-adjustable protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 900 mmz-travel: 620 mmControl: Heidenhain TNC 640 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMilling-turning machining centerThe machine is being sold in a defective condition.The rotary tilting table needs to be repaired.Spindle torque: 253NM / 12000min-1 / HSK 63Travel paths: 800/900/620mmControl: Heidenhein TNC 640Turning function: 4000Nm / 750rpm / diameter 800mm / max. 2000kgPallet changer: 6-pos, Pallet weight max 1 ton (pallet + workpiece)Tool changer: 60 places (expandable to 120 places)incl. spare spindleincl. palletsoptional: 4-jaw chuck SMW AutoblokOperating hours: 3469 h (Jan. 2025)X-axis travel:800 mmY-axis travel:900 mmZ-axis travel:620 mmX-axis rapid traverse:50 m/minY-axis rapid traverse:50 m/minZ-axis rapid traverse:50 m/minTorque:253 NmControl manufacturer:HeidenheinControl model:TNC 640Table load: ...

bore capacity in steel (diameter): 40 mmbore stroke: 190 mmturning speeds: 50-1800 U/minShort spindle: MK 4 Table dimensions: 500x400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 670 x 500 x 2120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm: 80-1.125 U/min.throat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mmdistance spindle /table: min. 117 / max. 701 mmfeed: 0,1 + 0,2 mm/Uheight of the machine: ca. 1840 mmweight of the machine ca.: 270 kgStandard equipment:- 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depthadjustable via depth stop and on the TFT LCD display (4 tools)- Infinitely variable speed adjustment via ...

Spindle Speed: 80-3200 U/min.: 30 mm: 25 mmtable surface area: 500x365 mmbore depth: 125 mmthroat: 260 mm: MK 3 distance spindle /table: 90-840 mmT-slot - width: 14 mmcolumn diameter: 110 mmweight of the machine ca.: 270 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6 mmtotal power requirement: 1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mmbore capacity in cast iron: 56 mm: 50 mm: M 30 : M36 : MK 4 throat: 300 mm: 615x430 mm: 70-4000 U/min.: 2x14x224 mmDistance spindle/table max.: 147/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,4 mm/Uheight of the machine: 1885 mmdrive motor: 1,8/2,9 kWweight of the machine ca.: 530 kgStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Control and light transformer- Main switch lockable- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Clockwise rotation by contactor control- Speed adjustment stepless- Speed display digital- Speed setting electrically- Protection IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 12LED machine lamp with radially adjustable light beam, supply voltage 24Volt, protection class IP 65Pos. 20.1Tapping device with foot switch, ...

bore capacity in steel (diameter): 40 mmthroat: 285 mmbore stroke: 160 mmSpindle Speed: 150-2.000 U/min.spindle taper: MK4 column diameter: 115 mmtotal power requirement: 1,5/2,2 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 1000x700x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 250 mmbore stroke: 125 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthreading: bis M 30 throat: 330 mmbore stroke: 180 mm: 4 speeds: 60 - 765 U/mintable-size: 720 x 360 mmtotal power requirement: 2,6 / 3,2 kWweight: 350 kgdimensions: 720 x 1100 x 2050 mmEquipment:- automatic feed- infinitely variable speed- thread cutting device- adjustable drilling depth stop- coolant device- spindle protection- drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 1250 mmz-travel: 1600 mmB-axis (table): 360.000 x 0,001° degmilling-head swivable +/-: (HV) 360.000° degpallet size:: 1000 x 800 mmtable load: 3000 kgtool taper: SK 50-B Plananlage 125spindle turning speed range: max. 8000 U/mintransmission ratio: 2 spindle drive: (100/40 % ED) 37/50 kWfeeds x/y/z -stepless: 30000 mm/minmax. torque on the spindle: 1410/2000 (100/40 % ED) Nmtotal power requirement: 100 kVAweight of the machine ca.: tdimensions of the machine ca.: 11555 x 7998 x 5050 mmUniversal machining center 5 axes simultaneouslyOriginal purchase price: EUR 1.295.000,-First machine installation in September 2011.A geometry measurement report (dated 30. August 2025) is available.Equipment:CNC-control Siemens 840D Solution LineSeparate handheld control unit, wired, Siemens HT-22-station pallet changer with safety light barrier 110-position tool changer (m ...

bore capacity in steel (diameter): 50.0 mmthroat: 300 mmbore stroke: 160 mmthreading: M 30 turning speeds: 100 - 1600 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 147 / 688 mmengine output: 1.8 / 2.9 kWweight: 450 kgMachine height: 1865 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed rates 0.1-0.2-0.3-0.4 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plate- Motor 1.8 / 2.9 KW - 100 - 1600 rpm.Special accessories included:- LED machine light pos. 12.- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device A pos. 24. (Coolant base plate, complete)- digital drilling depth display pos. 37.1 (5-digit LED display)The data for this ad  ...

bore capacity in steel (diameter): 55.0 mmthreading: M 30 / M 42 throat: 300 mmbore stroke: 140 mmturning speeds: 70 - 1200 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmweight: 380 kgMachine height: 1850 mmFurnishing :- automatic feed- Feed device 0.1 + 0.3 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validationincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0 (Thread cutting with stop)- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60.0 mmthreading: M 42 throat: 350 mmbore stroke: 200 mmturning speeds: 60 - 1530 U/mintable:: 720 x 510 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 200 mmfeed: 0.15-0.2-0.3-0.36 mm/Udistance spindle /table: 159 / 884 mmengine output: 3.6 / 4.3 kWweight: 605 kgMachine height: 1950 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plateincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23.0 mmthroat: 250 mmbore stroke: 100 mmmorse taper: 2 MKtable:: 370 x 300 mmturning speeds: 225 - 4300 U/mincolumn diameter: 90.0 mmdistance spindle /table: 140 / 670 mmengine output: 0.6 / 0.95 kWweight: 175 kgMachine height: 1770 mmFurnishing :- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Motor protection switch- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Connection plug (fully assembled, cable length 2m)- Spindle protection with electrical fuse- Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 4 Stkbore capacity in steel (diameter): 25 mmspindle distance: 475 mmtable-size: 450 x 1900 mmmorse taper: MK 4 total power requirement: 10,2 kWweight of the machine ca.: 3 tNumber of spindles: 4Drilling capacity in steel: 25 mmSpindle center distance: 475 mmTable size: 450 × 1,900 mmSpindle taper: Morse taper MT 4Total power requirement: 10.2 kWMachine weight: approx. 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmfeed: 0.10 + 0.20 mm/Udistance spindle /table: 117 / 701 mmtotal power requirement: 1.45 / 1.90 kWweight: 285 kgrange L-W-H: 500 x 800 x 1840 mmFurnishing:- autom. Feed 0.10 + 0.20 mm / rev- stepless speed adjustment- Short spindle MK 3- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Digital speed display- Feed overload protection- Spindle protection with electrical fuse- 2 m cable with plug 16A- Operating instructions in Germanincluding special equipment:- Coolant device B pos. 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35,0 mmbore capacity in cast iron: 40,0 mmthreading: M 24 in Stahlthroat: 320 mmmorse taper: 4 MKbore stroke: 160 mmturning speeds: 65 - 3250 U/mintable:: 500 x 420 mmthroat: 320 mmweight: 375 kgrange L-W-H: 600 x 870 x 2.170 mm 2019 showroom model () Approx. 1 hour of operation Special price on requestFurnishing:- Infinitely variable speed, ideal for- Set the desired cutting speed.- Automatic tool ejector and thread cutting device as standard- Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev- Solid gray cast iron table with rotating and swiveling support surface- T-slots in the machine base enable high workpieces to be clamped- Guaranteed concentricity 0.02 mm, measured in the quill- Hardened and ground gears ensure smooth running- Adjustable drilling depth stop with an easily readable scaleScope of delivery:- Key chuck 1 - 13 mm / B ...

: 30 mm: M 16 : M 20 : MK 3 : 225 - 4300 U/min.spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mm: 132 / 724 mmfeed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kWStandard equipment:- Motor protection switch- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protection- Speed display digital- Connector (fully assembled, cable length 2 m)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.