mandrinadoras y centros de mecanizado usadas para la venta (3,245)

spindle diameter: 125 mmx-travel: 3000 mmy-travel: 1500 mmcontrol: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mmTable dimensions: 1200 x 1500 mmtable load: 5 tspindle turning speed range: 12 - 2300 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmControl: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mmRotary table: 700 mmTable load: 1000 kgb-axis: Schwenkopf 0,001 °c-axis: 0-360° Rundtisch 0total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 700 mmz-travel: 630 mmControl: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mmTable load: 400 kgnumber of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mFEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1200 mmz-travel: 1200 mmfeed movement: 710 mmspindle taper ISO: 40 turning speed range: 8 - 1600 U/mintable-size: 1120 x 1000 mmtable rotating: 360 °table load: 2,5 ttotal power requirement: 11 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 3,3 x 3 mseparate switchboard, rapid feed, some tool holders, without face plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 320 mmbore stroke: 135 mmthread dia.: M 20 mmspindle turning speed range: 72 - 2600 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Uspindle taper: MT 3 table surface area: 370 x 360 mmDistance spindle/table max.: 850 mmdistance spindle/base plate: 1400 mmvoltage: 400 V / 50 Hztotal power requirement: 1,0 - 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,2 x 0,7 x 2,3 m• with cooling device• threading attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mmx-travel: 900 mmy-travel: 900 mmz-axis: 1200 mmw-axis: 800 mmtable surface area: 900 x 1200 mmrotation movement: 360 Gradtable load: 6,0 tturning speeds: 25 - 1400 U/minspindle taper ISO: 40 voltage: 380 V / 50 Hzdrive milling spindle: 9,2 kWtotal power requirement: 35 KVAweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 2,8 x 2,5 m• Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,• radial face slide Ø 600 mm.traverse distance: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore diameter: 620 mmspindle diameter: 130 mmbore depth: 320 mmfeed stepless: 0 - 12 mm/minturning speeds: 10 - 70 U/minvoltage: 380 V / 50 Hztotal power requirement: 4 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,0 x 1,2 x 1,3 mtransportable drilling out work, completely ready for connectiongear of drill spindle runs over LENZE planetary driveadvanced feed with LENZE direct current motor, output: 160 wattclockwise and counterclockwisewith tool holder for Ø 420 x 620 mm,tool holder for tooling equipment fabri. LENZ LPAS 3,diverse turning steelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 500x400 mmcontrol: Siemens type: 840 D spindle taper ISO: 40 spindle turning speed range: 8000 U/min: type of pallet-changer: 2 Rotary table: 360 °Cooling through the spindle: barTool changer: 40 chip conveyor: total power requirement: kWweight of the machine ca.: 11,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWtotal power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,8 mdimensions of the machine ca.: 3,3 x 3,0 x 2,9 m• with RENISHAW -detector OMP 40,• mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmweight: 110 kgStandard equipment:- Main switch with motor protection switch lockable- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 800 mmz-travel: 970 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 12000 U/minrapid traverse: 50 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 300 mmz-travel: 300 mmcontrol: Jasnac tool taper: BT30 Tools changer for 12 tools: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hurco VM10 Centro de Mecanizado Vertical. Hurco WINMax Control Año de construcción: 2010 Fabricante: Hurco Modelo: VM10 Control: Hurco WINMAX Velocidad del husillo: 10000rpm Tamaño de la mesa: 762 x 356 mm Capacidad de cambio de herramienta: 20 Tamaño de la herramienta: DIN40 Atraviesa XYZ: 560 x 356 x 457mm

Año de construcción 2003 Control Heidenhain iTNC 530 Tamaño de la mesa 280mm Carga de mesa 200kg Eje A +/- 110 grados Eje B 360 grados Desplazamiento del eje X 700mm Desplazamiento del eje Y 590mm Desplazamiento del eje Z 480mm Husillo 15000 rpm Paso rápido 32m/min Cambiador automático de herramientas Sí, sistema de husillo Big Plus Número de herramientas32 Longitud de la herramienta 280 mm Diámetro de la herramienta 88 mm o 125 mm con área de bolsillo adyacente Peso de la herramienta 7 kg Entrada400 / 3 / 50hz 33kW Transportadores de huecos de equipo, refrigerante, volante, enfriador de aceite Características Protección totalmente cerrada Longitud 4000 mm Ancho 3000mm Altura 3000 mm Peso neto en realidad 9.490 kg. / 9,4 toneladas.

bore capacity in steel (diameter): 40 mmthroat: 293 mmbore stroke: 120 mmspindle taper MT: 3 column diameter: 115 mmtable surface area: 514 x 360 mmspindle turning speed - stepless: 160 - 2250 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 0,285 tdimensions of the machine ca.: mCondition: new / unused: The machine can be viewed under current.: 37981400 V, 50 Hz, colour: light grey RAL 7035continuous speed control, digital speed indication, push button for emergency switch off,turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso.operation manual, wiring diagram.Machine has been checked in our workshop, including electr. testing report.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidad de perforación en acero (diámetro): 23 / 28 mmtiro: 260 mm carrera del ánima: 120 mmconectador de la herramienta: MK 3 tamaño de mesa: 500 x 350 mm diámetro de la culata: 100 mmqueriedad total: 1,3 kWpeso de la máquina ca.: 400 kgdimensiones de la máquina ca.: 800 x 600 x 1750 mm¡Alimentaciónfectiva! Rotación derecha-izquierdaajuste de velocidad sin pasos

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: Heidenhain TNC 430 total power requirement: 26 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de perforación en acero (diámetro): 80 mm Corte de rosca en acero: M 80 x 4 mm Proyección: aprox. 500/2500 mm kl./gr. Distancia entre la superficie de contacto y el pinole de perforación: 650/2300 mm Carrera de Pinole: 500 mm Superficie de sujeción de la mesa: 1250 x 2800 mm Velocidades: 9 - 1800 rpm Alimentación: aprox. 2 - 1250 mm Accionamiento del husillo: 7,5 kW Peso: 12000 kg Requisito de espacio: 4000 x 1280 x 4100 mm

x-travel: 1000 mmy-travel: 508 mmz-travel: 460 mmtaño del palet: 1240 x 550 mmnúmeros de palets: 2 el peso de la pieza de trabajo: 800 kgmácnico cónico de huso ISO: 40 motor de huso: 5,5 kW rango de velocidad de giro: 28 - 4000 U/minno. de herramientas en magazin: 30 control: MAZATROL M 1 queque de potencia total: kWpeso de la máquina ca.: 5,6 tdimensiones de la máquina ca.: 4,50 x 3,00 x 2,65 macc.: transportador de virutas

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: M 24 : M 30 : MK 3 bore stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mm: 514x360 mm: 2 x 14 x 224 mm: 117/701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160-2.250 UpMtotal power requirement: 1,45/1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 23 thread capacity: M10 bore stroke: 90 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 150-1.250/350-3.000 UpMtotal power requirement: 0,75 kWOverall size: 735x470x1080 mmweight of the machine ca.: 106 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20 bore stroke: 80 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 210-2.500 UpMtotal power requirement: 0,38 kWOverall size: 620x470x1050 mmweight of the machine ca.: 80 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 450 mmz-travel: 450 mmrotary table dia.: 270 mmrotary table tiltable: 0 - 24 °spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/minfeed speeds: 1 - 10.000 mm/mincontrol: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mmworkpiece length: 255 mmweight of tools max.: 6 kgtotal power requirement: 32 kWweight of the machine ca.: 11,6 tdimensions of the machine ca.: m= 5 axis machining centreAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117 / 701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160 - 2250 UpMtotal power requirement: 1,45 / 1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection  ...