máquinas de goma usadas para la venta (415)

Se ofrece una máquina de moldeo por inyección de caucho de la empresa Klöckner DESMA, con un volumen de carrera de 1600 cm³, fuerza de sujeción de 2500 kN, presión de inyección de 2078 bar, peso de la máquina aproximadamente 11000 kg. Una visita al lugar es posible mediante cita previa.

Prensa No.1 Año de producción: 2021 Horas de trabajo: 8185 h Precio: EXW Eslovaquia Sujeto a venta previa Prensa No.2 Año de producción: 2022 Horas de trabajo: 395 h Precio: EXW Eslovaquia Sujeto a venta previa Tamaño de las placas calefactoras: 670 mm x 980 mm Volumen de inyección: 3300 ccm Datos adjuntos. Las prensas todavía están instaladas Sujeto a venta previa

machine measurements: ca. 1030 x 1110 x 1950 mmmachine weight: 800 kgpower capacity: ca. 2,8 kWCondition: usedSpecification: SiloStar 924 dosing system - used- For dosing liquid silicone LSR- LSR dosing with servo-hydraulic unit, servo motor 2.8 kW- Dosing with piston pumps- Uniform emptying of components A + B via proportional compensation cylinders- Variable mixing ratio- Touchscreen with visualised user interface- Containers: 200 litre drums- Operation via 10 inch touch display- Automatic mixing material pressure control with sensor directly on the mixing block- Pressure sensor for A + B- Circulation device A + B- Power connection: 380-480 VAC, 50/60 Hz (3P + PE), 16 A- Mixing head machine connection- Hose package 2x nylon DN 16 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Test force: -- kNDimensions (HxWxD): -- mmweight: 76 kgCondition: Used, ready for useSpecification: Mitutoyo image processing and profile measuring deviceType: Quick Scope QS-250Z 1J- UsedThe Quick Scope QS-250Z is used to measure:- Outer diameter- Inner diameter- Distance measurement- Parallelism- AngularityThe device was used in quality assurance in a single-shift operation.Technical data:- Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm- Accuracy: 5 µ / resolution 0.5 µm- Image capture unit: 1/3 CCD color camera- Travel speed max.: 80 mm/s- Acceleration max.: 250 mm/s²- Table dimensions: 269 x 311 mmLighting:- Transmitted light: 12V / 30W halogen- Coaxial incident light: 12V / 50W halogen- Fiber optic ring light: 12V / 100W halogenSoftware: QSPAK Version 3.1Operating system: Win10proWorkpiece weight: max. 10 kgWeight:  ...

clamping force: 500 kNinjection volume: 76,5 cm³screw diameter: 32 mmplaten size: 360 x 335 mmCondition: used, as good as newSpecification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit:- clamping unit: horizontal- Clamping force: 500 kN- Opening stroke max.: 400 mm- Platen distance max.: 650 mm- Mould installation height min.: 250 mm- Clear width between the tie bars: 360 x 335 mm- Ejector stroke max.: 80 mmInjection unit SP 82:- Screw diameter: 32 mm- Screw L/D ratio: 16.3- Screw stroke max.: 95 mm- Injection volume max.: 76.5 cm³- Injection pressure: 1076 bar- Plasticising flow: 13 g/s- Injection flow:  ...

roll diameter: 200 mmroll length: 400 mmrolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 2 year warrantySpecification: Monoblock laboratory rolling mill 200 x 400 mm - new- Roller diameter: 200 mm- Roll length: 400 mm- Roll bore: peripherally drilled- Individual drives: variable friction ratio- Roller bearings: roller bearings with manual grease lubrication- Gap adjustment: hydraulic- Gap adjustment: approx. 1 - 20 mm, during normal operation operation- Speed range approx.: 2.5 - 19.5 rpm- New hydraulic unit for roller gap and emergency system emergency system- New Johnson-Fluiten rotary joints- two adjustable guide plates Tecafine PE5 Natural ...

roll diameter: 250 mmroll length: 500 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 2 year warrantySpecification: Monobloc laboratory rolling mill 250 x 500 mm - new- roll diameter: 250 mm- Roll length: 500 mm- Roll bore: peripherally drilled- Single drives: variable friction ratio- Roller bearing: roller bearing with manual grease lubrication- Gap adjustment: hydraulic- new hydraulic unit for roller nip and emergency system- New rotary unions make Johnson-Fluiten- two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of ...

roll diameter: 350 mmroll length: 700 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 22 kWCondition: used, overhauledSpecification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers- roller diameter: 350 mm- roller length: 700 mm- Rollers: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tilting guide plates made of steel- New roller container, made of stainless steel, for holding mixture- bi-directional bars- two safety brakes for NOT stop- AC motor: 22 KW - 400 Volt - 50 Hz- New  ...

roll diameter: 600 mmroll length: 1800 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch 0total power requirement: 132 kWCondition: used, completely overhauled, with warrantySpecification: Rolling mill 600 x 1800 mm - used monobloc model - motor under the rolls- roller diameter: 600 mm- roll length: 1800 mm- Roller core with central chamber for water cooling- Fixed friction between the rolls - hydr. gap adjustment: new- hydraulic unit: new- Tiltable steel guide plates- Rollers on bronze bearing bushes with oil circulation lubrication via pump- Rollers with new ball bearing slewing rings, make Maier, for connection to the water circuit to the water circuit- AC main motor: 132 kW - 400 V - 50 Hz- two Safety brake for EMERGENCY STOP- Roller tank made of stainless steel to hold the mixture-  ...

voltio: 380 Vpeso: 1,4 t:

Key data: 370 liter

PN-370l Mezclador disponible Pneum. Tolva Caja 2 motores de CC de 1050 kW con inversor Báscula de alimentación Escala de aceite ¡Descripción adjunta!

Key data: 660 mm, 2100 mm

4 núms. ¡Molinos Buzuluk 84" disponibles! Rodillos perforados, Rodamientos de rodillos, ajuste de presión eléctrica, accionamiento de engranaje 2 x Volante a la izquierda 2 x Volante a la derecha ¡Descripción adjunta!

extrusora de vacío de alimentación en frío Troester 90 mm x 18 D, con rodillo de alimentación, accionamiento 46 kW, velocidad de la hoja de 10 a 60 rpm, 5 TCU,

extrusora de alimentación en frío - vacío de 60 mm x 18 D, con rodillo de alimentación, accionamiento 22 KW, velocidad del tornillo de 10 a 60 rpm, con bomba de engranajes, 5 TCU,

¡Está disponible una planta completa con equipo para producir Airspring! Calendario de 3 rodillos con línea y molino doble de 84" Cortador de bies Varias máquinas de construcción varias prensas hidráulicas de curado máquina de ensayo 3 x Líneas de montaje Bobinadora ...

Key data: 2000 mm, 1300 mm

disponible Cortador de bies Berstorff Ángulo de 0 a 50 grados con empalme manual 90 grados con empalme automático Certificado CE ¡Descripción adjunta!

Extrusora de alimentación en frío de los años 90, GE 90 x 16 D Vac, marca Troester, con cabezal rociador de manguera / perfil grande, accionamiento 52 KW Siemens AC, 4 TCU Siengle

clamping force: 4.000 kNinjection volume: 4.000 cm³screw diameter: -- mmplaten size: 800 x 710 mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- heating platen size: 800 x 710 mm- ejection device: 2-layerInjection unit:- Injection volume max.: 4,000 cm³- Original screw 1005.10.008 B/cThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 350 kNinjection volume: 58,5 cm³screw diameter: 28 mmplaten size: 260 x 254 mmCondition: used,Specification: injection moulding machine for TPE - usedclamping unit:- clamping unit: vertical- clamping force: 350 kN- opening stroke max.: 300 mm- platen distance max.: 500 mm- Mould installation height min.: 200 mm- Clear width between tie bars: 260 x 254 mm- Ejector stroke max.: 80 mm- Clamping unit: VV- Lift of protective bonnet: 500 mmInjection unit:- Screw diameter: 28 mm- Screw L/D ratio: 18.6- Screw stroke max.: 95 mm- Injection volume max.: 58.5 cm³- Injection pressure: 1577 bar- Plasticising flow: 8.6 g/s- Injection flow: 85.5 g/s- Connected load: 3x 400 V, 50 Hz- Max. heating power: 5.8 kW- Drive power: 7,4 kW- Total power:  ...

clamping force: 4.000 kNinjection volume: 2.700 cm³screw diameter: -- mmplaten size: -- mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- ejection device: 2-layer- Brush system: 2-layerInjection unit:- Injection volume max.: 2,700 cm³Two identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers- roller diameter: 400 mm- roll length: 1000 mm- Rolls: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit: NEW- Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock- Stainless steel roller container for holding the mixture- bi-directional safety bell ...

roll diameter: 660/700 mmroll length: 2100/1800 mmrolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kWCondition: usedSpecification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100Complete 4-roll L-calender line.The line was used for the production of transparent PVC.However, the basic machines can also be used for rubber.The most important machines in the line:Pos. 8: Liquid mixer make Trusionma hot and coldPos. 10: KO Kneader make BUSSItem 12: Buzuluk 660x2100 mixing roller millItem 14: 4-roll L-calender make Buzuluk 700x1800Items 15-19: Tempering and basin equipment behind the calender Roller conveyorItem 20: Layer thickness profile measuring deviceItem 23: Rewinding deviceThe system was used for transparent soft PVC.Machines are still installed.The data for this ad wa ...

machine measurements: 2.100 x 2.200 x 2.100 mmmachine weight: 2.000 kgpower capacity: 36 kWCondition: usedSpecification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand- Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene.- PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying- All cleaning cycles are freely programmable.- Filling volumes: Tank 1: 170 litres Tank 2: 80 litres- Type of solvent: Perchloroethylene- Total connected load of motors: 9.65 kW- Installed e ...

diámetro de la muestra: - mmlongitud de la muestra: - mmrequisito de potencia total: - kWpeso de la máquina aprox.: - tdimensiones de la máquina aprox.: - mMuestras volumétricas - cortador / punzón de muestras

Máquina de armonización disponible para la molienda de PCR_Tyres desequilibradas ¡Descripción adjunta! Certificado CE

Press force max.:: 3000 kNheating plates:: 600 x 630 mmelectrically heated:: °Cheating power:: kWpiston stroke:: 420 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: Press 600 x 630 mm, second-hand- clamping force: 300 tonnes (3,000 kN)- closing: from bottom to top- Heating platens: 2 electric platens, with new heating rods- Heating platen dimensions approx.: 600 x 630 mm- Distance between the heating platens approx.: 420 mm- New electric valves- AC machine output oil pump: 5.5 kW- New control cabinet with Siemens 7’ touch panel- PLC control system make Siemens S7-1200- New cabling- Frequency inverter made by Schneider- Light barriers in the front area,Overhauled in accordance with CE standard safety regulationsOperating instructions and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the sof ...

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 600 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 2,250 kgTwo identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 550 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01Bclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 550 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 3,200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1600 kNheating plates:: 400 x 400 mmelectrically heated:: -- °Cheating power:: 9,92 kWpiston stroke:: 400 mmno. of stages:: 1 Condition: Used,Specification: Press 400 x 400 mm, second-hand steel frame construction- Clamping force: 160 tonnes- pressure force: 1600 kN- Operating pressure: 300 bar- Closing: from bottom to top- Heating platens: 2 electric platens- Heating power: 4.96 kW/platen- Heating platen dimensions: 400 x 400 mm- Specific pressing pressure: 1000 N/cm²- Distance between the heating platens: 500 mm- Piston stroke: 400 mm- Piston diameter: 260 mm- AC motor power: 7.5 kW- Pneumatic protective cover in the front area,- lifting device- Sliding table- Approx. dimensions: 1,760 x 1,150 mm- System height approx.: 2,470 mm- Weight appro ...

clamping force: 200 kNinjection volume: 80 cm³screw diameter: -- mmplaten size: 350 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 20 t- clamping force: 200 kN- Heating platen size: 350 x 300 mmInjection unit:- Injection volume max.: 80 cm³- Connected load: 3x 400 V, 50 Hz- Pump output: 11 kW- Total output: 44 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmSpace requirement approx: 3 m²Weight approx.: 2.500 kgThere is also an identical system as a spare parts dispenser as an optionfor an extra charge. The control panel is missing here.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.