máquinas talladoras de engranaje usadas para la venta (208)

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 mmtable size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mEquipment/accessories- 7 vices- change wheels - Clamping devices- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

módulo: 10 diámetro: 180 mm diámetro del diámetro: 40 mm de ancho: 75 mm: 2 peso: 14 kg La fresadora es como nueva, sin señales de uso. Otras fresadoras usadas de cremallera y piñón hasta el módulo 10 a peticiónLos datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

módulo: 4 diámetro: 180 mm diámetro del diámetro: 40 mm de ancho: 67 mm: 5 peso: 15 kg La fresadora es como nueva, sin señales de uso. Otros cortadores usados de cremallera y piñón hasta el módulo 10 a peticiónLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

max. wheel diameter: 600 mmmax. module: 6 range L-W-H: 2540 x 1500 x 1920 mmtable diameter: 160 mmweight of the machine ca.: 3,6 tHigh-performance gear hobbing machineTooth helix angle 15°Tooth width 270 mmWheel diameter 620 mmTooth helix angle 30°Tooth width 250 mmWheel diameter 610 mmTooth helix angle 45°Tooth width 200 mmWheel diameter 500 mmTooth angle 60°Tooth width 100 mmWheel diameter 450 mmMaximum cutter diameter 105 mmMaximum cutter width 115 mmClamping table diameter 420 mmBore of clamping table 75 mmDepth of bore below table surface — mmDiameter of workpiece clamping wheel 450 mmof clamping mandrel 30 mmof milling mandrels 22–27–32 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gear hobbing diameter - external: 1200 mmgear hobbing diameter - internal: 1200 mmgear hobbing width -max.: 260 mmmax. workpiece diameter: 1500 mmControl: Siemens 840 D table diameter: 900 mmTable hole Diameter / depth: 320 / 520 mmmax. table load: 95 kNcoolant pump: 120 l/minAxial distance between thrust spindle - table: 0-820 mmwork-spindle diameter: 125 mmtool taper: SK 45 DIN Table rpm: 12 1/minpower requirement: 30 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 11,715 x 5,565 x 4,505 mStrokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/minSliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 300 mm ...

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 table size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mMilling length 1750 mmMilling width 260 mmModule - max. 10Table dimensions incl. water channel 460 x 2100 mmTable clamping surface: 250 x 1850 mmMilling cutter width - max. 100 mmFeed of the milling carriage, infinitely variable 0 - 500 mm/min.Rapid traverse 3000 mm/minMilling head - tiltable + / - 30 °Speed range of the milling spindle, in 9 steps 29 - 178 rpmMilling head swivels on  ...

max. wheel diameter: 1000 mmgear width: 200 mmmax. module: 10 min. module: 0,5 max. dia. of teeth cutting: 1000 mmmin. dia. of teeth cutting: 75 mmtable diameter: 1000 mmboring diameter: 400 mmspindle stroke: 0 - 230 mmstroke position adjustment: 250 mmdistance between table / ram: 480 / 730 mmdia. of shaper cutter: 8 Zolltaper: Morse 5 tool taper: 1 3/4 Zolltotal power requirement: ca. 20 kWweight of the machine ca.: 11 tStandard version- Chip conveyor- Two additional tables with diameters of 850 mm and 1,500 mm- Several cutting tools- Set of interchangeable gears- Program for cutting in 1-2-3-4 passes/cycles- Program for spiral cutting- Several holders and clamps for workpiecesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmdiameter of tools min: 69,85 mmtooth width max.: 58 mmdiameter of tools max.: 230 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmwork piece table - Ø: 212,71 mmb-axis: + 90,1 / - 1 °Control: 160 i - MB FANUCtotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mWAGURIWith EWAB robot cell (KUKA robot)without coolant filter systemFire extinguishing system without CO2 bottlesCooling oil return with various pumps / collecting basinsThreading device A1/B2 axes with measuring probeClamping device for a pinion shaftExternal spindle oil coolerExtraction system pinion shaftThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmdiameter of tools min: 69,85 mmdiameter of tools max.: 230 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmwork piece table - Ø: 212,71 mmb-axis: + 90,1 / - 1 °Control: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mWAGURIwith EWAB load cell built in 2012(Linear loader)no coolant filter system available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 180 mmgear width: ca. 220 mmmax. module: 3 / 5 mmControl: Siemens 840D sl max. radial velocity: 5000 mm/minmax. workpiece diameter: 180 mmtable rotation speed: 800 U/mintable diameter: 145 mmaxial travel: 250 mm mmback rest:: axial travel: 300 mmclamping force max.: 13 kNmilling head:: swivelable +/-: 45 °drive capacity: 23 kWturning speeds: 6000 U/mindiameter of tools max.: 90 mmtool clamping length max.: 211 mmmodule hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/minweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mEquipment / Accessories:- The machine is equipped for dry milling.- workpiece magazine- parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 t- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1250 mmgear width: 600 mmmax. module: 16 min. module: 2 tooth width: 490 mmZahnschrägungswinkel max.: 45 °shifting: 200 mmmax. number of teeth: 12 diameter of hob: 240 mmcutter length max.: 280 mmtable diameter: 1020 mmmilling spindle speeds (infinitely variable): 28 - 200 U/minpower capacity: 25 kWweight of the machine ca.: 16,2 tdimensions of the machine ca.: 4,5 x 4,6 x 2,7 mequipped with:- universal hob head- change gearsmachine has been partly overhauled (electrical and machnical) and is now with programmable, digital InfeedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2500 mmgear width: 750 mmmax. module: 18 / 22 min. module: table diameter: 1800 mmmin. number of teeth: 12 table hole: 300 mmhob turning speeds: 20 - 100 U/mintable load: 10 tmilling cutter dia. x width: 250 x 340 mmshifting: 150 mmfeeds - tangential: 0,25 - 3 mm/minfeeds - radial: 0,07 - 1,5 mm/minfeeds - longitudinal: 0,55 - 3,5 mm/minmilling feeds: 13,4 - 80 (Einzelteilen) mm/mintotal power requirement: ca. 30 kWweight of the machine ca.: 28 t- change gears, arbors, toolings, clamping plots- universal hob head- swiveling outer steady - single indexing deviceparty overhauled in 2023The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Longitud de la pieza - máximo: mmmax. módulo: 0 Consumo total de energía: kWweight de la máquina ca.: tEspacio requerido: mLos datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

max. wheel diameter: 300 mmmax. module: 8 min. module: 0,7 Control: SINUMERIK 840 D min/max. pitch cone angle: - 90 / + 90 °workpiece spindle - bore: 127 mmgrinding wheel diameter: 50 - 230 mmspindle speeds (infinitely variable): 7.500 U/minwork piece spindle speed: 700 U/mintotal power requirement: 146 kWweight of the machine ca.: 21 tdimensions of the machine ca.: 9,5 x 3,6 x 3,1 mMeasuring probefor tooth gap(integrated on the grinding head)External grinding spindle cooling systemELBARON oil mist extraction (integrated in the machine)Hoffmann coolant filter systemWas used for the serial production of spiral-toothed ring gearsNo clamping devicesNo grinding wheels / grinding wheel flangesNo dressing wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmspindle speeds (infinitely variable): 6000 U/minwork piece spindle speed: 1200 U/mindiameter of tools max.: 230 mmdiameter of tools min: 69,85 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmb-axis: + 90,1 / - 1 °work piece table - Ø: 212,71 mmControl: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mInternal probe Renishaw LP2 (axis X2,Y2)Hoffmann coolant filter system HSF 100SE/K (built in 2008)Tank capacity 2500LVT oil mist filter systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1400 mmgear width: 400 mmmax. module: 25 min. module: 1 total power requirement: - kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,0 x 1,2 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro máximo de la rueda: 1000 mm Ancho de engranaje: 180 mm máximo. Módulo: 7 min. Módulo: 0,5 min. Carrera de RAM: 16 mm. carrera de la ram: 180 mm, agujero de la mesa: 160 mm, consumo total de potencia: 4 kWweight de la máquina, aprox. 5,2 t. Dimensiones de la máquina, aprox. - m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

max. wheel diameter: 2500 mmgear width: 980 mmmax. module: 34 min. module: 2 grinding stroke stepless adjustable: 1000 mmroot circle dia. min.: 180 mmnumber of teeth: frei wählbar max.helical angle: 0 - 35 °grinding slide stroke: 20 / 200 U/mmgrinding wheel peripheral speeds:: 35 / 45 m/sgrinding wheel diameter: 340 / 435 mmgrinding motor: 22 kWpressure angle: 12,5 - 30 °table diameter: 1300 mmtable load capacity: 10000 kptable bore diameter: 300 mmdepth of hole: 300 mmroll feed: 0 - 1000 m/mintable diameter: 1300 mmworkpiece weight: 10000 kgclamping length: 2760 mmclamping height: 420 - 590 mmtable bore diameter: 280 mmdepth of hole: 300 mmControl: BWO H+K CNC 785 total power requirement: 79 kVAweight of the machine ca.: 40 tdimensions of the machine ca.: 7,3 x 7,9 x 4,5 m- 10 axis CNC control BWO H+K CNC 785 (2nd Generation from 2009)- integrated measurement system on the machine  ...

Diámetro máximo de la rueda: 400 mmAncho del engranaje: mmmáx. módulo: Control: potencia total requerida: kWpeso de la máquina aprox.: 4 tdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

max. wheel diameter: 360 mmgear width: 180 mmmax. module: 7 min. module: 0,5 Control: Reishauer 0: max. 180 mmtooth width: max. 180 mmmin. number of teeth: 10 max. number of teeth: 600 max.helical angle: 45 °max. workpiece weight: 60,0 kggrinding wheel width: 84 / 104 mmgrinding wheel diameter: 280 / 350 mmSpindle Speed: 1.100 - 1.900 min/-1grinding spindle turning speeds at profiling: 52 - 95 min/-1total power requirement: 24 kVAweight of the machine ca.: 5,0 tdimensions of the machine ca.: 5,0 x 8,0 x 3,0 m- CNC Control Reishauer- CNC Dressing Unit- Exhauster- CoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 600 mmgear width: 0 mmmax. module: 16 (25) min. module: 1 center distance betw. workpiece-tool min/max.: 40 - 590 mmdiameter of hob: 290 mmcutter length max.: 470 mmtangential adjustment: 450 mmmilling head -swivable +/-: 45 °milling head speed: 15 - 380 U/mintable rotation speed: 50 U/minmilling spindle drive: 37 kWtable diameter: mmtable load: 3750 kgfeeds: 2000 mm/minControl: Siemens 840D total power requirement: 115 kVAweight of the machine ca.: 31 tdimensions of the machine ca.: m- 6-axis CNC control Siemens Sinumerik 840 D- complete covering- counter stay- Coolant Unit- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 250 mmgear width: 242 mmmax. module: 4 min. module: 0,5 table diameter: 250 mmtable bore diameter: 68 mmmilling cutter dia. x width: 130 x 130 mmspindle stroke - max.: 110 mmmin. number of teeth: 6 center distance betw. workpiece-tool min/max.: 10 - 210 mmmilling spindle speeds (infinitely variable): 80 - 500 U/minfeeds axial: 0,32 - 4 mm/WUradial feed: 0,05 - 1,6 mm/WUfeeds - tangential: 0,16 - 2 mm/WUControl: LAUER PCS table diameter: 250 mmtable hole: 62 mmmilling cutter dia. x width: 130 x 130 mmtotal power requirement: 16 kVaweight of the machine ca.: 3,6 tdimensions of the machine ca.: 2,8 x 2,4 x 1,9 mMachine ideal for electrical retrofittingEquipped with:- LAUER PCS NC control- Siemens Simatic S5 PLC- Loading device/magazine for workpiece size max. 140 mm Ø- Shifting- 2-cut cycleThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

Diámetro máximo de la rueda: 420 mmAncho del engranaje: 120 mmmáx. módulo: 8 min. módulo: 0,5 control: BWO 783 no. Nº de carreras: 32 - 800 Cubo/mincarrera: 0-137 mmdiámetro tablero: 400 mmdiámetro interior table: 125 mmpotencia total: 50 kWpeso de la máquina aprox.: 9 tdimensiones de la máquina aprox.: 5,3 x 3,9 x 3,5 mControl CNC Heckler und Koch BWO 783Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

gear hobbing diameter - external: 1200 mmgear hobbing diameter - internal: 1200 mmgear hobbing width -max.: 260 mmcontrol: Liebherr PC-NC max. workpiece diameter: 1500 mmtable diameter: 900 mmtable bore diameter: 320 mmmax. table load: 95 kNpower capacity: 30 kWcoolant pump: 120 l/minAxial distance between thrust spindle - table: 0-820 mmShaping spindle diameter: 125 mmtool taper: SK 45 DIN weight of the machine ca.: 26 tdimensions of the machine ca.: 8,073 x 6,183 x 4,375 mStrokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/minEquipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter nominal: 2400 mmmax. workpiece diameter: 2800 mmmax. module: 30 mmcontrol: Siemens Sinumerik 840 D dividing plate diameter: 2200 mmtable diameter: 2500 mmTable hole Diameter / depth: 800 / 875 mmmax. table load: 40000 kgTable rpm: 4,5 min-1clamping length max.: 375 mmclamping diameter max.: 350 mmcutter diameter max.: 2800 mmCutter arbor cone: HSK-B160 swivelling range milling head: + 30/-45° Distance Cutter - Workpiece: 615 / 1600 mmweight of the machine ca.: 57 tSlide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/minEquitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 380 mmgear width: 200 mmmax. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mmmax. workpiece diameter: 400/ 600 (800) Außen innen begmax. gear width: 200 mmCenter distance between gear head and table center: -50 / 450 mmTravel range of the lifting position: 250 mmMax. module for straight gearing: 6 mmMax. axial travel: 250 mmwork table:: - table diameter: 400 mmtable hole: 150 mmmax. table speed: 30 1/mno. of T-slots: 6 St.Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kWMax. stroke rate: 600 DH/minFace milling head axis angle adjustment: +/- 0,5 °spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mmStroke length, automa ...

Máquina: Cocina de engranajes 1 juego de pasadores de engranajes 20 piezas. Ángulo de compromiso 20 grados Módulo: Configurar todos los tamaños M 1 2x M 3 M 1,25 M 3,25 M 1.5 2 x M 3.5 M 1,75 M 3,75 M 2 M 4 M 2,25 M 4,5 M 2,5 M 5 M 2,75 M 5,5 M 6 Cocinas de engranajes: M 1, 20 grados, φ 70x50, 80% M 1,5 20 grados, φ 54x56, 90%, M 2 20 grados, φ 72x72 90% M 2,5 20 grados, φ 60x65, 80% M 4 20 grados, φ 90x78, 80% M 2,5 20 grados φ 78x190, 30% M 1.6 30 grados, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90% Otras herramientas: Ver foto

Lorenz máquina de impacto vertical SV00 - ver imágenes

Lorenz SV00