otras máquinas para el procesado de metales usadas para la venta (10,325)

number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW

Por favor, echa también un vistazo a los documentos PDF adjuntos (dibujo y detalles técnicos) Auction-ID: A7-48589-1

measuring range X-axis:500 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:1000 mmtool diameter: mmtool taper: SKcompressed air:4-6 bardimensions: mmachine weight ab.: kgTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

sheet width:3050 mmplate thickness:4 mmtotal power requirement:9 kWweight of the machine ca.:6 tdimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Auction-ID: A1-48478-1

grinding diameter:3 - 150 mmgrinding length:200 mmtotal power requirement:380V, 50Hz, 30 kWdimensions of the machine ca.:5 x 3 x 2,5 m

grinding diameter: 0,2 - 190 mmgrinding length:400 mmcentre height:100 mmweight of the machine ca.:1,6 tdimensions of the machine ca.:2 x 1,5 x 1,8 m

indexing:Länge =< 1050 mmtable::Teilungslänge =

1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

Total force (nominal):800 toClamping surface (left-right):x mmClamping surface (front-back):x mmtable surface area:3200 X 2200 mmTotal force (nominal):2-3-4-5- Presse - 600 to. totable surface area:2-3-4-5- Presse 3100 X1900 mmLast overhaul 2010/2020, consisting of:Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by SiemensBlank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet dischargeGripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300Double-column press, manufacturer Weingarten, type ZS 1200.34Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing  ...

valve dimensional inspection

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 10400 €: 199.68 €: 20000 kg: 10000 to: 750 mm: 4500 mm: 300 mm: 2 x 70 mmConventional rotating fixtures are preferred in areas such as welding, painting and paint preparation,due to their cost-effective design and ease of integration.They are manufactured as standard with capacities ranging from 1 to 150 tons.Roller material: PolyurethaneCapacities up to 500 tons are also possible upon request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25400 €: 485.14 €: 1250x2500 mm: HYPERTHERM Powermax 45 XP : 6 mm: 12 mm: 25 mm: 4 mm: 45 A: 45 A 50 % ED, 32 A 100 % A: 24 m/min: 1/10 mm: 470 l: 500 kg/m²: 3060 mm: 1760 mm: 1500 mm: 500 kgcompressed air powered plasma sourceHYPERTHERM Powermax 45 XPCNC-workbench software (external PC not included)height adjustment by arc voltageset-up laserprecision profile rail guide(HiWin)zero backlash HTD drive beltdriven by step motorssolid frame constructionseperate renewable support gratewater trough to catch flying sparksswimming burner bearing in combination with exchangeable slide screws, enables constant cutting heighthand operation unit for comfortable processing and set up on the workpieceusers manual in GERMANaccording to CE rulesALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp ...

diameter:500 mmworkpiece weight:30 kgtest dia. min.:200 mmtotal power requirement:0,03 kWweight of the machine ca.:1000 kgdimensions of the machine ca.:1x0,5x1,06 m

Auction-ID: A1-48478-4

measuring range X-axis:-50 . 530/830/1030 mmmeasurement range Z =:605/805/1005 mmtool taper:30 & 40 VDIcompressed air:6 bardimensions:2200 x 1200 x 2100 mmachine weight ab.:900 kgVertical Toolsetter with Cutting Edge detection via Camera System.Operating over CNC Control yb PC System or Manually, 3 axes, CNCEquipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axisand Linear Roller bearing in all Axis of the Slide Carriage.Electronic measuring equipment:PC electronics with intelligent KELCH EasyVision image processing17" TFT colour monitorOptional: second 17" TFT monitor for full screen measuring windowThe CNC Toolsetter is in good condition and ready for immediate use.

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EUROPower & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones.2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device.Powder Curing Oven, direct gas heated three-zoneSpray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device.Opening Cross Section Areal: Width 750 mm, Height 1000 mmTechnical Details: Pretreatment conveying speed 2.3 m / min.Pretreatment surface area approx. 200 m2 / h.Painting Surface approx. 120 m2 / h.Throughput of workpieces approx. 4,000 kThis Poweder Coatin ...

length:1000 mmwidth:800 mmheight:1050 mmweight:200 kgSchubladenschrank mit 5 AuszügenMit AMF Spannsystem Elementen

measuring range X-axis:150- 300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmenlargement:20 X fine adjustment:+/- 5 mmcompressed air:6 bardimensions:2 x 1,5 x2 mmachine weight ab.:150 kg

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5

length:12192 mmwidth:2438 mmheight:2896 mmweight:4580 kgTotal weight:34000 kgcharge:29420 kgCooling ContainerInternal dimensions:Length 11585mmWidth 2290mmHeight 2545mmPallet spaces 23

plate thickness: mmsheet width: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m

weight of the machine ca.:11,2 tone spindle

tube diameter:40-90 mmwall strength:20 mmweight of the machine ca.:11 tdimensions of the machine ca.:4 x 1,6 x 1,35 mbending radius max.:270 mmThis machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve  ...

screw size:60 mmclosing pressure:3500 kNweight of the machine ca.:25,5 t

diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.

bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle

x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.