otras máquinas para el procesado de metales usadas para la venta (11,401)

Dispensador de hojas totalmente automático PAL-Cut 800 La Palcut 800 corta el papel de forma rápida y precisa en hojas intermedias de la longitud deseada, directamente del rollo. Cortadora totalmente automática Dispensador de hojas PAL-Cut 800, que corta capas intermedias de forma rápida y precisa en la longitud deseada. El dispensador de hojas es adecuado para el funcionamiento continuo en un sistema de paletización automática y para empresas con alto consumo de hojas. La Palcut 800 funciona con rodillos de un ancho máximo de 800 mm. Designación de tipo: PAL-Cut 800 Longitud: 1853 mm Ancho: 1380 Altura: 1739 para anchura de rollo hasta: 800 mm Altura de montaje: 1.368 mm Velocidad de trabajo: 480 piezas / h Conexión de alimentación: 220 V, 0,18 kW Modo de funcionamiento: totalmente automático Peso: 370 kg Enlace PAL-Cut 800 ¡Más artículos, nu ...

Heraeus Probador de intemperismo Xenotest 1200 CPS Dispositivo de xenón para probar la solidez a la luz y la resistencia a la intemperie de materiales en condiciones simuladas Conector eléctrico Voltaje: 400 V Corriente nominal: 50 A máx. Potencia conectada: 33 kVA máx. Entrada de cable de los emisores de xenón: 2,8 - 6 kW por emisor Compensación: 3 condensadores a 50 uF Horas: 3888 ¡Más artículos, nuevos y usados, se pueden encontrar en nuestra tienda! ¡Costos de envío internacional a pedido!

thread dia.: bis M 36 turning speeds: 0-100 U/minthread: M5 - M36 working area: 2050 Rmax.working range: 500 Rmin.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 5,5 kWweight - pallet system: ca. 500 kgFurnishing:- electro-hydraulic thread cutting machine- large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers- mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge- continuous speed adjustment- vertical/horizontal thread cutting possible- Lateral sorting of the quick-change inserts possible- Connection cable with 16A plug Special accessories included / quick-change inserts:M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22M27 / M30 / M33 / M36The data for this ad was created with ModulMWS - the software solution of  ...

thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/minthread: M5 - M24 working area: 2050 Rmax.working range: 500 Rmin.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 3,0 kWweight - pallet system: ca. 300 kgFurnishing:- electro-hydraulic thread cutting machine- large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers- mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge- continuous speed adjustment- vertical/horizontal thread cutting possible- Lateral sorting of the quick-change inserts possible- Connection cable with 16A plug Special accessories included / quick-change inserts:M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 M max.turning speeds: 400 U/minthread: M 3 - M 12 Mworking area: 1600 R max.working range: 500 Rmin.weight: 16 kgDescription:The AT II models have a radius of up to 1600 mm and thanksto their construction a flexible workspace.For professional use. Easy to mount on a worktop.Furnishing:- Tool holder with 6 cutter holders• M3 20111812 DIN 371 19• M4 20111814 DIN 371 19• M6 20111816 DIN 371 19• M8 20111817 DIN 371 19• M10 20111818 DIN 376 19• M12 20111820 DIN 376 19- with slip clutch- Control valve with lubrication- Including compressed air motor / maintenance unit- Adapter connection size 1The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mmflat steel: 100 x 5 mmL-beam: 60 x 8 mmbending radius min.: 190 mmround bar steel: 18,0 mmweight of the machine ca.: 33,0 kg.Characteristics :- For precise cold and hot bending of flat, round and square steel- Stable design for screwing on the workbench- Infinitely adjustable bending stop with locking pin- With eccentric quick clamping for efficient work- Readable bending angle up to 120°- High repetition accuracy thanks to the bending angle stop- Ideal for repair shops and locksmithsScope of delivery:- Bending plate sharp / round- Radius bending plate R 20 / R 25- offset block- Bending plate for round bar- offset plate- Radius bending plate R 10 / R 15- angle stop- Clamping block with eccentric clamp- Material stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kgthroat: 95.0 mmtable length: 120 mmtable width: 120 mmtotal power requirement: manuell kWweight of the machine ca.: 17.0 kgdimensions of the machine ca.: 270 x 130 x 330 mmDescription:- For pressing in and out bearings, bushings, etc.- Made of torsion-resistant steel- Includes mounting holes, ideal for mounting on a workbench- Suitable for bushing removal, straightening, bending, reaming, etc.- Adjustable lever bar, depending on the required force- Ideal for repair shops and general workshop useThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 5,0 tthroat: 215 mmworkpiece height max.: 445 mmMandrel diameter: 50 x 50 x 645 mmtable plate: Ø 275 mmtotal power requirement: manuell kWweight of the machine ca.: 160 kg.dimensions of the machine ca.: 370 x 550 x 810 mmDescription :- for pressing in and out of bearings, bushings, ...- the basic body of the model DP 5 made of high-quality gray cast iron- Includes mounting holes, ideal for mounting on a workbench- suitable for bushing, straightening, bending, broaching, ...- variably adjustable lever bar, depending on the required effort- ideal for repair shops and the general workshop areaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 900 x 700 x 750 mmcompressed air: 5.0 - 8.0 barAir consumption: ca. 800 l/min.Loading: max. 50 kgvoltage: 400 Vtotal power requirement: 1.32 kWweight of the machine ca.: 700 kgrange L-W-H: 1200 x 1200 x 2100 mm Current new price approx. 23.000 Euro () Special price upon requestEquipment:- Industrial sandblasting system- Work area: 900 x 700 x 750- Perforated sheet = work grate with stable support- 2 side openings with locking doors- Continuous blasting pressure adjustment- Pressure gauge - Pressure indicator- Front viewing window- 1 free-moving foot switch- Blasting gun + blasting gloves 1 extra pair included- Operating instructions (PDF) Includes special accessories:- 1 WIWOX filter and recovery system Can be installed separately next to or behind the booth Can be moved on casters with a parking brake(see Figure 9 - system lying down for transport purposes)The data f ...

feed pressure: 8,0 barintake capacity: 180 L/minEffective free air delivery: 112 L/minReceiver capacity: 6,0 Ltr.motor: 230 Vpower capacity: 1,1 kWweight of the machine ca.: 14,0 kg.dimensions of the machine ca.: 380 x 310 x 490 mmDescription :- portable craftsman piston compressor- permissible duty cycle up to 30%- 1-stage, direct-coupled, single-cylinder airend- Compressor mechanics working completely OIL-FREE- Very compact design for easy handling- Finely ribbed cylinder and cylinder head- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- the start-up relief takes place via a mechanical vent valveThe standard scope of delivery includes:- an automatically regulating pressure switch- a condensate drain plug- a pressure reducer- two pressure gauges- Safety valve- pre-assembled connection cable with plugThe data for this ad  ...

feed pressure: 10,0 barintake capacity: 345 L/minEffective free air delivery: 228 L/minReceiver capacity: 50,0 Ltr.motor: 230 Vpower capacity: 2,2 kWweight of the machine ca.: 51,0 kg.dimensions of the machine ca.: 800 x 390 x 750 mmDescription :- mobile craftsman piston compressor- High-quality processed 1-stage compressor block- with 2 cylinders and optimal efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary- the start-up relief takes place via a mechanical v ...

feed pressure: 10,0 barintake capacity: 727 L/minEffective free air delivery: 582 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 4,0 kWweight of the machine ca.: 91,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed, 2-stage compressor block- with 2 cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings a ...

feed pressure: 10,0 barintake capacity: 539 L/minEffective free air delivery: 377 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 3,0 kWweight of the machine ca.: 80,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed 1-stage compressor block- with 2x cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head- for optimum temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- Powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings  ...

weight max. in kg: 1000 kgtable width: 800 mmstroke height: 190-1010 mmtable length: 1300 mmstroke of worktool slide: 40 mm/sek.weight: 220 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgtable length: 1300 mmstroke height: 190-1010 mmtable width: 800 mmstroke of worktool slide: 22 mm/sek.weight: 280 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15.0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.000 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 410 kg.total power requirement: 7.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mmWheel width: 500 ( 450 ) mmwork height max.: 880 (+/- 60) mm MADE IN GERMANY Description:- 3000 mm roller and measuring track type Exakt A standard- with digital position indicator el. connection 230 V 50 HZ with power pack- Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm)- Measuring stop can be adjusted from the workplace by means of a hand wheel- with pneumatic brake for fixing the dimensions.- Stable material stop trolley, 12 ball bearings- on a large guide profile.- The stop is adjustable and can be folded back manually.- Basic version of roller and measuring track- in stable steel construction, all versions are stationary- The max.measuring length is the track length minus 450 mm- Ball-bearing support rollers Ø 60 x 2 mm- Galvanized conveyor roller with axis Ø 15 mm- Load capacity per meter of roller conveyor approx. 300 kg- Roller pitch 250 mm- Web  ...

through-put width: 580 mmworking heigth: 615 mmdiscs: 570 x 260 mmAir consumption: 400 l/min.air pressure: 2,7 - 5,5 bar0: 184 Liter0: Luft .. 3/8 Zollweight: 125 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1220 x 615 x 580 mm (LxWxH)- including sandblasting gun (grain size 0.149 - 0.250 mm can be used)- Including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mmworking heigth: 810 mmAir consumption: 680 l/min.air pressure: 8,6 bar: 148 Liter0: Arm Loch 180 mmair clutch: 3/8 Zollweight: 160 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1110 x 820 x 810 mm (LxWxH)- very stable construction- including sandblasting gun (usable grain size 0.149 - 0.250 mm)- including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Transport dimensions / packed: 1350 x 1000 x 1100 mm- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 1000 x 900 x 900 mmrange L-W-H: 1300 x 1750 x 2200 mmweight: 350 kgDescription:- Compact and elegant design- Easiest operation- low material consumption- optimal use of space- highly effective dedusting- efficient way of working- Environmentally friendly working without dust nuisance- controllable material consumption- Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions:: innen 1160 x 580 x 580 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 120 kgtotal power requirement: 1,2 kWweight: 115 kgrange L-W-H: 1225 x 935 x 1640 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- With gas pressure springs for quick and easy loading and unloading- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Container for ...

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.Description:The AT models have a radius of up to 1900 mm and theirconstruction a flexible workspace. For professional use.Easy to mount on a worktop.Furnishing:- including 7 thread cutting inserts• M3 20111812 DIN 371 19• M6 20111823 DIN 371 31• M8 20111824 DIN 371 31• M10 20111826 DIN 371 31• M12 20111827 DIN 376 31• M16 20111829 DIN 376 31• M20 20111831 DIN 376 31- Control valve with lubrication- Including air motor- Adapter connection size 2- The cutting head can be pivoted vertically downwards by 90 °- The cutting head is pivoted and rotatable through 360 °- Operating instructions in German without the perforated table as per Fig.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Láser de marcado FOBA DP 15 El sistema de marcado láser FOBA DP 15 utiliza un láser de fibra con una longitud de onda de 1064 nm y un enfoque de lente de f = 254 mm (distancia focal de 254 mm). Esta combinación permite que el pulgada láser Allround marce materiales como metales y plásticos de forma permanente y nítida. La longitud de onda de 1064 nm es bien absorbida por muchos materiales, que se pueden utilizar para el marcado de recocido, el cambio de color o la eliminación de material. Aplicación: El láser de fibra es un láser versátil en pulgadas para marcar productos industriales. Es ideal para metales y una amplia gama de plásticos. La tecnología permite un marcado permanente, legible y preciso. Funcionalidad: El rayo láser crea un punto de luz enfocado que penetra en el material. Dependiendo del material y la configuración, se pueden lograr varios  ...

FOBA Laser FOBALAS 94S Nd: YAG Sistema de marcado láser Láser de marcado Sistema de marcado láser FOBALAS F 94S Tipo de láser: FOBALAS 100 CW/QS - ND: YAG Clase de rendimiento 4 P máx. = 120 W 1.064 μm XY/2-100 HPM Tipo: Foba Voltios: 15 V Longitud de onda 1064 Horario: 43927 ¡Más artículos, nuevos y usados, se pueden encontrar en nuestra tienda! ¡Costos de envío internacional a pedido!

diámetro máximo de la rueda: 400/500 mmControl CNC: GE FANUC Serie 160i-M diámetro del piñón - máx.: 400 mmdiámetro máximo del engranaje de la corona: 500 mmEje x: +/- 70 mmy-eje: 200 mmz-eje: 200 mmángulo del eje: 90 Gradvelocidades:: R 0 - 3000 / T 0 - 5000 1/mincorriente nominal: 30 kVApeso de la máquina aprox.: 6,2 tdimensiones de la máquina aprox.: 3,2 x 2,5 x 2,3 mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

La máquina está en muy buenas condiciones y lista para funcionar. Es posible realizar una inspección in situ.

Estamos vendiendo nuestro sistema de electroerosión por penetración aquí debido a una nueva adquisición. Esta es una máquina que fue vendida por la empresa MATRA en ese momento. Este es un DECKEL DE35C. Mientras tanto, la empresa Exeron se ha hecho cargo del servicio. El recorrido es: X = 600 mm Y = 400 mm Z = 400 mm El sistema de electroerosión por penetración tiene un cambiador de electrodos de 4 veces El sistema de control de la máquina se revisó recientemente, se renovó la fuente de alimentación y el SAI. La máquina también fue revisada y mantenida continuamente por la empresa Exeron en caso de mal funcionamiento. La máquina está funcionando y todavía está encendida para una posible prueba. El horario de atención es: 33196 horas. Varios portaherramientas pueden formar parte de la negociación del precio.