otras máquinas para el procesado de metales usadas para la venta (10,903)

ram hammer weight: 26 kgram hammer stroke: 200 mmtype: KO : 596 no. of strokes: 220 Hub/minair hammerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mmlifting capacity: 20 Tonnen : . : 3-Achser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rolling capacity max.: NA tworkpiece diameter: 38 mmworkpiece length: 500 mmtotal power requirement: 24 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mMax.Ø tool slide stroke 760 mmMax.Ø rack length 610 mmLength of workpiece between centres, approx. 500 mmMax. tooth width / profile width 92 mmMax. workpiece Ø 38 mmTailstock stroke on outboard support, hydraulic, approx. 500 mmModule range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using pinion cage ...

centre distance: 1200 mm: 550 weight of the machine ca.: 2,5 tmultifix: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kWgenerator - rated current: 110 Aconnected load: 56 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 0 tdayligth: 0 mmwire dia.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 250 mmcontrol: Fanuc 16 T : 2 toll turrets: 2 x 12 tool taper: HSK 63 : 04800000181 frequency: 50 Hzampere: 168 AChip conveyor: JAKSS Filter system: JABelade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: length: mmwidth: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mEyebolt DIN580 made of material C15E in galvanized version.Size M30, load capacity 3200 kg (single, direct).The offer price applies to a set consisting of 4 pieces.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: vice: x-travel: 700 mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 0 mmworkpiece length: 1000 mmwork piece width: 875 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axesCNC Controlled Flexible Brushing and Deburring CellThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 2,8 lpower fuel: Benzin Old model with carburetor. Modern classic engine runs, but has been removed for about 10 years. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

content: . cbmpower requirement: . kWbolt-diameter: 66 mmSwivel bucket We used the bucket on our 16-ton excavator for excavation work. Suitable for excavators up to a maximum of 22 tons. Not worn. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4070 mmy-travel: 1185 mmz-travel: 1985 mmtotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6000 x 4500 x 4000 mConsisting of: Working Range:Measuring column, longitudinal movement, X Axis 4,070 mmMeasuring slide, cross, as Y Axis (measuring head) 1,185 mmMeasuring slide, vertical, as Z Axis (vertical) 1,985 mmAdjustment of measuring head, roll axis 360 ° pitch axis 220 °Measuring table 5,000 x 2,000 mmWeight, approx. 15,000 kgSpace required 6,000 x 4,500 x 4,000 mmAccessories / Special Features :o 3D tracer head, with turning/swivelling device.o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering  ...

width: 33 mmbolt-diameter: 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 12,5 mmwidth: 600 mmheight over floor: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mEngine overhauled, 5 new rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 400 mmgrinding width: 0 mmmax. module: min. module: total power requirement: 3 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mShaver cutter Ø, min./max. 64 - 320 mmModule range 1 - 12Shaver cutter width, max. 40 mmNo. of teeth 13 - 240Pitch block Ø 73 - 320 mmSpeeds of workpiece slide 5 / 20 / 30 / 40 teeth per min.Grinding slide speed 690 rpmGrinding slide Ø 762 mmGrinding wheel swivelling (pressure angle) 5 - 21 °Grinding slide swivelling (helical angle) 2 x 35 °Grinding slide adjustment, vertical 240 mmCutting speed 1 / 0.5 / 0.25 m/minSpindle drive 1.1 kWTotal electrical load, approx. 3 kW - 500 V - 50 HzWeight, approx. 4,200 kgAccessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers.Unfortunately the machin ...

x-travel: 450 mmy-travel: 400 mmz-travel: 400 mm: control: Heidenhain 355 cooling: total power requirement: 4 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 1200 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUniversal 3D measuring center, double-column, modern software, many accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 0,5 tstroke: 500 mmheight of hook: 1750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

frequency: 50 Hzweight: 3000 kgvoltage: 3 x 400 Voutput: 8,3 kwampere: 12 Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 1,4 t: 227 : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

packet weight: 900 kgx-travel: 200 mmnumber: 3 Stück : 2x AEG mit Steinen : 1x FAG mit Magnet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5 weight: 5 t: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 2,2 textruder diameter: x mm: x : x Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1989 angle stop: 30 -120 Gradgood condition: . : Anschlag weight: 600 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding tap pointer: . tube diameter: 5 - 20 mmtag length: 50 - 100 mmtotal wight: 1,4 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 620 mmwidth: 130 mmheight: 300 mmweight: 88 kg: Antik Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mmplate depth: 3500 mmplate height: 270 mmweight: 5,5 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca. 1988 plate thickness: bei Stahl max. 3,3 mmtable:: 1100 x 700 weight: 1 tDimensions (L/W/H): 1,50 x 1,30 x 1,40 mmdrive: hydraulisch Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Krups A100 : . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.