otras máquinas para el procesado de metales usadas para la venta (11,463)

The Fronius TR2200-F is a high-precision foot pedal for regulating the welding current in TIG welding. Functions according to the user manual: Stepless control of the welding current by foot pedal Command dial to set the maximum current Minimum current with unpressed pedal: 3 A Connection via LocalNet interface Extremely sensitive control travel → ideal for aluminium and thin sheet metal Compatible with many MagicWave, TransTig, TransPocket models Typical compatible devices (excerpt): MagicWave 1700 / 2200 / 2500 TransTig 1750 / 2200 / 2500 / 3000 TransPocket 2500 / 3500 / 4000 (TIG)

Exhibition machine, unused.>br>• 5 speeds>br>• With foot control>br>• With brake motor>br>• With emergency stop>br>• With hydraulic roller adjustment>br>• With special tool set>br>Sheet thickness 4 mm>br>Roller diameter 125 mm>br>projection 200 mm>br>Total power requirement 2.2 kW>br>Machine weight approx. 0.48 t>br>Dimensions approx. 1.6 x 0.6 x 1.2 mm

In this jet cabin is included as standard: blasting gun4-piece nozzle setset gloveslightingkit protective filmsfoot pedal.Pressure regulatorsuction with microfilterInternal dimensions 945 x 605 x 605 mmOperating pressure 2.2 - 5.5 barDimensions L x W x H 1.0 x 0.61 x 1.65 mPackage size max. 1300 x 1000 x 75 cmMachine weight approx. 0.09 tSystem is supplied in the colour black Condition: never used / new (5)

QuadTech / GenRad Guardian 610 – Safety Analyzer / Hipot Tester These devices are used for safety testing of electrical components, often in production, laboratories or quality assurance. Typical features: AC-Hipot DC-Hipot Insulation Testing Ground Bond Test Automated test sequences

Welding table on lift table: Hole diameter: 28mmThe table is made of 15mm thick steel S355The surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mmRibbed underside for reinforcement.Table length 2000 mmTable width 1000 mmLoad capacity 2000 kgLifting height max. 1525 mmTotal connected load 1.5 kWConnected voltage 400 V Condition: never used / new (5)

FAG 6316 0200G0726 - G217 0200 - 016724151-0000-02 - Made in Germany

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Floor planer / electrode weldersee pictures Condition: untested (6)

Welding current max. 180 Amperetechnical data see pictures not complete Condition: untested (6)

Welding helmetProtection level 4 - 12 MPower supply 2 x CR2032 Weight 460 gramsDimensions 250 x 270 x 230 mm Condition: never used / new (5)

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672

Toggle hand presses >br>HK 1700 stroke 60 mm with crank with working height fine adjustment>br>height of the stand 450 mm>br>Even more pressure in production without additional effort.>br>Maximum pressure output shortly before the end of the stroke thanks to knee lever technology.>br>Particularly stable construction of spindle head and stand>br>pressure 17.0 kN>br>stroke 60 mm>br>projection 105 mm>br>working height from up to 75 -180 mm>br>table surface 170 x 130 mm>br>spindle diameter 25 mm>br>machine weight approx. 35 Kg>br>Dimensions L x W x H 260 x 130 x415 mm >br>condition: never used / new (5)

Machine is equipped with:>br>- foot switch>br>sheet thickness 2.0 mm>br>projection 280 mm>br>roller diameter 78mm>br>total power requirement 1.5 kW>br>machine weight approx. 350 kg>br>space requirement approx. 1.2 x 0.8 x 1.3 m

Plasma cutting machine with: Digital display.Surge protection. Plasma torch. Underground cable. Reducing valve with moisture separator. Equipped with IGBT technologyWelding current 15 - 40 ACutting capacity 1 - 16 mmOpen circuit voltage 96 VCompressed air connection min. 4 barConnected load 3.6 kWConnected voltage 230 VWeight 9.0 kgDimensions LxWxH 371 x 153 x 232 mm Condition: never used / new (5)

Untested, without loading aids

FESTO VACF-B-K1-1-10-EX4-M Magnetspule / Solenoid coil , NEW , Mat-Nr. 8059806

Notching machine>br>- Foot switch>br>- Emergency stop>br>sheet thickness 6 mm>br>pressure 18 t>br>Knife length 220 mm>br>angle adjustable from - to 90 degrees>br>table surface 1100 x 950 mm>br>bending length 835 mm>br>Machine weight approx. 1.1 t>br>Dimensions L x W x H 1.2 x 0.8 x 1.4 m

10 pcs Quick Clamping Bolts for 28mm SystemPlate Thicknesses 25mmNumber 10 Hole Diameter 28 mmWeight 10 kgDimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5)

Hand-held press brake>br>bending length 300mm>br>material thickness max. 2mm>br>knife widths 25, 50 ,75 and 150mm>br>bending angle max. 90 degrees >br>condition: never used / new (5)

included: lattice box.

Technical data Note: There was no original machine documentation. To the best of our knowledge, the technical data was partly read from the nameplate or identified on the basis of the machine. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1975 Machine Type: Eccentric Press / Stamping Press Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Mechanical press drive with flywheel Separate control cabinet Foot pedal Material storage / parts ejection

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

XXL starter package, consisting of:- 15x – Standard clamping pliers- 5x – Multi-clamping pliers- 10x – Side clamp with eccentric- 15x – Loose cam H30- 10x – Loose cam H100- 2x – Pipe insertion knock series- 10x – Quick release bolt- 10x – Stop block 15mm- 4x – Right angle XL- 6x – Right angle- 6x – Angle of attack- 1x – Box- 1x – Insert holder- 1x – Allen key- Tool trolleyNumber 100Positions Hole diameter 28 mmCondition new Weight 280 kgDimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5)

Profile steel shears with>br>- 1 foot release>br>- Support tables>br>- Rectangular notch>br>- Hole punch incl. tools>br>round steel 32 mm>br>square steel 30 mm>br>angle steel 80 x 80 x 8 mm>br>cutting capacity flat steel 80 x 13 mm >br>punching force 36 t>br>projection 170 mm>br>working stroke 28 mm>br>working height 980 mm>br>material thickness 28 x 13 mm>br>hole diameter in sheet thickness 25x10 / 30x8 mm>br>machine weight approx. 0.8 t>br> space requirement approx. 1.8 tbr 2 x 0.8 x 1.9 m >br>condition: unchecked (6)

195 cm height 40 cm depth 94 cm width

Including paint sludge separation system

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.