otras máquinas para el procesado de metales usadas para la venta (11,425)

diámetro máx. de la rueda: 0 mmanchura de la caja: 0 mmmáx. módulo: 40 m. módulo: 1 peso de la máquina ca.: 0,05 tdimensiones de la máquina ca.: 0,5x0,3x0,3 mpeso y unidad de prueba de salida para máquinas de medición de engranajes.

Cortadores shaper del Módulo 1 al Módulo 14 disponibles: - diferente no. de dientes, diferentes anles de presión, diferentes perfiles, orificios y tamaños! cortadores de eje Módulo 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro cortadores de discos Módulo 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. ¡lista completa bajo petición!

weight max. in kg: 800/400 kgstroke: 6/12 mmstroke speed: 5/8 m/minoutput: 1,25 kwconnected load frequency: 230 Vweight: 21 kgdimensions: 420 x 180 x 280 mmDue to the low installation height, the maximum lifting height remains available.Control with emergency stop. (required by law)Suspension with safety hook.Overload protection with slip clutch.Built-in limit switch.Collection bag for chain.Control console with 1.6 m cable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grosor: 16 x 16 mmnúmero: 4 Stählepeso: 3 kgmedidas: 300m x 200 x 50 mm

diámetro: 32 - 50mm der Buchsenlargüda: 350 mmanchura del casco: 10 - 12 - 14 mmpeso: 20 kgmedidas: 400 x 150 x 250 mmAnchuras de la ranura:10 - 12 - 14mmDiámetro de los arbustos guía:32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

: 8 St.rango L-W-H: 710 x 510 x 900 mmpeso: 67 kgTuermo de dibujo con 8 cajonesDimensiones del cajón 600 x 435 mmAltura del cajón: Sorteo 1 - 7, 81 mmDibujo 8, 173 mm

length: 6000 mmwidth: 3250 mmnumber: 4 T-slot - width: 32/48 mmT-slot - distance: 180 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe Palttenfeld consists of 4 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram weight: 1000 kgstroke: 1000 mmthroat: 800 mmimpact capacity: 4200 mkptotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud: 7000 mmanchura: 7000 mmnúmero: 8 Salida: 350 mm Ranura T - ancho: 36/58 mm Ranura T - distancia: 285 mmsembra de las tuercas en T: 62 reque de potencia total: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: mPanel consta de 8 paneles Tamaño por panel 3500x1750x350Número de ranuras en T por panel 7 piezas Total 49 m²

floor-plate length: 6000 mmfloor-plate width: 2000 mmfloor-plate height: 350 mmwidth of T-slots: 36/60 mmT - slots distance: 285 mmnumber of T-slots: 8 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud de la placa de piso: 4000 mmanchura de la placa de piso: 1600 mm altura de la placa de piso: 300 mm Ranura T - distancia: 175 mm Ranura T - ancho: 28/48 mmnúmero de ranuras en T: 9 requier de potencia total: kWpeso de la máquina ca.: 10 tdimensiones de la máquina ca.: 4000x1600x250 m

workpiece weight: 4 kgworkpiece length: 200 mmdia. on complete length: 200 mmControl: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hzdimensions: 4,1 x 4,2 x 2,5 mconnected load: 12 kVAflange diameter: 250 mmweight: 4,5 tBalancing machine for rotors - Turbocharger fuselage groups- hydraulic measuring station- Compensation station- Pulsation measuring table- Chip extraction- Measuring instrument CAB 950T- feeding device- Schenck/Lauer Control on Dase of WindowsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mmfloor-plate width: 2400 mmfloor-plate height: 300 mmwidth of T-slots: 45/78 mmT-slot - distance: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mmround steel bars: 30 mmU-iron on the x-axis: 60 x 40 x 6 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 118 - 148 mmturning speeds: 9,3 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,425 tdimensions of the machine ca.: 1,5 x 0,8 x 0,8 m• Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5.further roller sets optionally:for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4,Surcharge for each extra roller set: € 440,-/setMachine in unused condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud de la placa de piso: 5000 mmanchura de la placa del piso: 2100 mm altura de la placa del piso: 300 mm Ranura T - ancho: 40/63 mm requisito de potencia total: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

ram hammer weight: 480 kgstroke: 710 mmthroat: 550 mmimpact capacity: 1250 kpmno. of strokes: 210 Hub/minram hammer stroke: 710 mmwork height max.: 720 mmtotal power requirement: . kWweight of the machine ca.: 7,4 tdimensions of the machine ca.: mpressure: 400 kgSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 520 mmheight: 700 mmdepth: 350 mmthickness of clamping plate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThere are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mmAbout usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 800 mmmeasuring range X-axis: 520 mmTable dimensions: 700 mmweight: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mmU-iron on the x-axis: 80 x 45 x 5 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 150 mmturning speeds: 10 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,92 x 1,4 m• Machine has a standard set of rolls for profile: flat (upright) 60 x 10, flat 80 x 15, Square 35, square pipe 45 x 45 x 2, rectangular pipe 60 x 30 x 3, Further sets of rolls can be supplied optionally,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 3000 kgProduction capacity: 1500 kg/hdegree: 1200 °cheating capacity: 1700 kcal/KWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud: 800 mm ancho: 500 mmalcama: 1000 mmpotencia de potencia: kWpeso de la máquina ca.: 0,3 tdimensiones de la máquina ca.: m2 unidades

diámetro de rosca: 12 mm longitud de rosca: 20 mmvaduras de giro: 400 U/minámbrica de trabajo: 500 - 1600 mmpeso de la máquina ca.: 25 Kgdimensiones de la máquina ca.: m• dispositivo de corte de rosca neumática, M3 - M12,• con 6 adaptadores de cortes de rosca, Tamaño 1,• Válvula de control con lubricación,• n.º de pedido 31681,

Tipo: horno de tierra rotatorio calentado por gas con recuperador central y precalentamiento del aire temperatura: 1.300°C capacidad del horno: aprox. 700 kg/h Apertura clara de la puerta (an x al.): 600 x 400 mm Número de quemadores: 6 Número de áreas de control: 3 Capacidad de calefacción: 720 kW El. Valor total conectado: aprox. 15 kVA PLC: Siemens S7

Máquina de ensayo de tracción Fabricante: Karl Frank GmbH Tipo: 81559 Año de construcción: 1980 Prueba de pato: altura: 1000mm, ancho: 400mm, profundidad ungraenzt Rangos de fuerza: 2000N, 1000N, 500N, 200N, 100N, 50N Precio original en aquel momento: 49.855,00 DM ATENCIÓN: El dispositivo no se ha probado para la funcionalidad. Toda la información sin garantía

Número de herramientas: 36 St.medidas: 0,72 x 0,56x 0,95 mpeso: 27 kgNuevo carro de herramientas móvil para portaherramientas con 40 cónicos u opcional para portaherramientas VDI 40. Cada fila es fácilmente extraíble. El carro se embalará para su transporte y se entregará sin portaherramientas. Las variaciones en el color son posibles.

Número de herramientas: 30 St.medidas: 0,72 x 0,56x 0,95 mpeso: 27 kgNuevo carro de herramientas móvil para portaherramientas con 50 cónicos. Cada fila es fácilmente extraíble. El carro se embalará para su transporte y se entregará sin portaherramientas. Las variaciones en el color son posibles.

Tipo: horno de cámara de paso calentado por gas Dimensiones internas (An x Al x Pr): 2200 x 2350 x 3000 mm Número de áreas de control: 2 peso de alimentación: aprox. 2,5 t Control: Siemens S7

longitud de la mesa: 1000 mmanchura de mesa: 1000 mmcargaable: 1,5 t diámetro de la brida: 700 mmmácnico de giro: máx. 0,04 U/minpeso de la máquina aprox.: 1,2 tdimensiones de la máquina L x W x H: 1,60 x 2,0 x 1,50 m

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 7 units, drilling and thread cutting8 units, drilling and sinking 5 units, drilling, sinking and thread-cutting 2 unit),spindle taper SK 40 each, engine power of the individual unitsbetween 4.0 and 4.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 10 units, drilling and thread cutting5 units, drilling and sinking 3 units, drilling, sinking and thread-cutting 1 unit, thread cutting 3 units),spindle taper SK 40 each, engine power of the individual unitsbetween 4.5 and 5.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.