prensas para madera usadas para la venta (285)

Usé prensa hidráulica. Condición: Usada, en condiciones de funcionamiento Auction-ID: A7-50988-149

Utilizó prensa de montaje de marcos (modelo N1071/1253) para montar marcos de madera, carcasas, paneles y piezas de madera pegada. - Sistema hidráulico de sujeción - Motor: 3 CV / 380 V - 4 travesaños verticales (transversales) - Dimensiones útiles de trabajo: altura 1,5 m, anchura 3,25 m - Dimensiones totales: altura 2,80 m, longitud 3,80 m, profundidad 1,10 m - En condiciones de funcionamiento Auction-ID: A7-50988-157

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tdistance between columns: 600 mmstroke: - mmtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 2 x 2 x 3,2 mNo. 3421Mould press 2500 / 700 kNSingle stroke 2-handSingle stroke foot switchAutomatic continuous run set-up and tippingTable 500 x 500Working range: Pressure capacity 250 tonnesDrive: ^22The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 ttable surface area: 2100 x 1400 mmpassage width: 2122 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tram surface: 3600 x 2500 mmstroke: 350 mmControl: Siemens S 7 no. of strokes: 11 - 44 Hub/mintable surface area: 3600 x 2500 mmram adjustment: 400 mmmaterial width: 500 - 1950 mmmaterial thickness: 0,6 - 2,5 mm mmcoil weight: 35 tcoil external diameter: 900 - 1900 mmcoil internal diameter: 610 mmno. of straightening rolls: 13 straightening roll diameter: 50 mmStack height: 400 mmstations: 2 total power requirement: kWweight of the machine ca.: 390 tdimensions of the machine ca.: mwith reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3550 mmstroke: 1100 mmdistance table/ram, max. stroke up, adjustment up: 1900 mmtable surface area: 3500 x 1800 mmdie-cushion pressure inside the table: 350 tstroke of drawing cushion in table: 295 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in pusher: 160 mmram surface: 3500 x 1800 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kWweight of the machine ca.: 265 tdimensions of the machine ca.: moverhauled in 1998The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 2560 mmstroke: 1050 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 395 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 200 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1600 tdistance between columns: 3160 mmram stroke: 1450 mmdistance table/blankh.,max. stroke up,adjustm. up: 2250 mmtable surface area: 4000 x 2200 mmram pressure: 1000 tpressure of blank holder: 600 tstroke of blankholder at the bottom: 1000 mmstroke of blankholder with adjustment 0-100 mm: 1450 mmblank holder size: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 275 / 400 mmram surface: 4000 x 2200 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 ltotal power requirement: 390 kWweight of the machine ca.: 250 tdimensions of the machine ca.: 6,0 x 4,3 x 10,5 mHead press (1600 tons) of a press line with five subsequent presses (800 tons)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensiones de la placa: 2,500 x 1,1250 mm Apertura de luz natural: 300 mm Número de luz diurna: 1 St. Calefacción: Presión específica: kg/cm² Presión total: a motor Salida: kWDimensiones (L/W/H): mmpeso de la máquina aprox. 3 t kgAño: unbekannt Año: Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mmTotal pressure: 400 toweight of the machine ca.: 12000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1550x2950 mmWeight: 4000 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mmWeight: 4000 kgTotal power requirement: 19,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x1620x2130 mmWeight: 5760 kgTotal power requirement: 32,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mmWeight: 7900 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mmWeight: 400 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3600x1650x2150 mmWeight: 6500 kgTotal power requirement: 52 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8500x1800x2150 mmWeight: 6000 kgTotal power requirement: 10 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4500x1500x2000 mmWeight: 6500 kgTotal power requirement: 22,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3480x1500x2000 mmWeight: 5500 kgTotal power requirement: 22,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3150x4000x1900 mmWeight: 1500 kgTotal power requirement: 36 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x1600x2000 mmWeight: 1720 kgTotal power requirement: 26,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x3000x1650 mmWeight: 850 kgTotal power requirement: 16 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 7300x1600x2600 mmWeight: 5500 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8/300x1600x2600 mmWeight: 4000 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.