prensas usadas para la venta (1,784)

pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Descripción general Prensa de estampación mecánica de alta velocidad fabricada por JELŠINGRAD bajo licencia de Hermann Raster KG, Alemania, modelo BPA-75. Prensa de alta resistencia diseñada para estampado, punzonado y blankado progresivo de gran volumen a partir de bobinas. Detalles técnicos Fabricante: JELŠINGRAD Modelo: BPA-75 Año: 1985 Número de serie: 8510917 Fuerza nominal de prensado: 750 kN / 75 t Velocidad de pulsación: Infinitamente variable de 120–600 golpes/min Carrera del RAM: 10 / 50 mm Ajuste de la RAM: 80 mm Luz máxima diurna: 400 mm Tabla: 1.250 × 750 mm Distancia entre los montantes: 730 × 620 mm Ancho máximo de la tira: 300 mm Altura de alimentación de la tira: 100–130 mm Longitud de avance por carrera: 5–15 mm Potencia del motor: 15 kW Fuente de alimentación: 3 × 380 V, 50 Hz Embrague y freno de aire Compatible con equipos de alimentación con  ...

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kg very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinder = double-acting cylinder- upper  ...

pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmdayligth: 425 mmthroat: 300 mmworking feed: 9.0 mm/secreturn speed: 90.0 mm/secwork height max.: 980 mmback stop - adjustable: ca. 700 mmControl: PPS-TS Touch oil volume: 350 ltotal power requirement: 18.0 kWweight: 12.000 kgrange L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__sEquipment:- CNC electro-hydraulic press brakes- with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left)- CNC-controlled axes: Y1/Y2 + X- CNC motorized backgauge (X-axis) with 4 manua ...

pressure: 40.0 tchamfer lenght: 1250 mmdistance between columns: 890 mmwork stroke: 100 mmdayligth: 300 mmcolumn arm: 200 mmtable width: 140 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 90.0 mm/sectank: 63.0 ltotal power requirement: 3.0 kWweight of the machine ca.: 2000 kgrange L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!)Features:- conventional hydraulic press brake- swiveling control unit (front left)- electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds)- manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator- 2x manually adjustable gauge fingers (R + Z axes)- 1x upper tool- 1x reversible universal die block- pressure gauge / pressure indicator- 1x mobile control unitThe data for this ad was created w ...

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 8800 €: 169.84 €: 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTIONS (PRICES ON REQUEST):Handwheel and fixingbolt for cylinderadjustment1 pair of V-blockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmEquipment:- robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Including round steel chain and 2x locking bolts Piston rod with metric mount- 1x set of V-block prism support- Pressure gauge for pressure display- Simple manual operation with : 1x feed speed 1x working speed 1x retraction speed- piston can be stopped in any position- Hydraulic tank permanently mounted on the side- operating inst ...

pressure: tdistance between columns: mmstroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 tstroke: 20-150 mmram stroke - adjustable min/max: 20 - 150 mmtable-size: 1780 x 1250 mmram surface: 1500 x 1000 mmtotal power requirement: 75 kWweight of the machine ca.: 46 t- Installation height with max. stroke at bottom adjustment at top 500 mm- Passageway in the table : 1200 x 300 mm- Milling in the table : 1300 x 400 x 80 mm- Infinitely variable stroke rate : 20 120 Hübe minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 340 mmstroke: 20-120 mmno. of strokes: max. 45 Hub/mintable plate: 1000 x 720 mmram surface: 750 x 380 mmdaylight: 330 mmweight of the machine ca.: 8,7 tdimensions of the machine ca.: 1270x2310x2595 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 300 mmdayligth: 570 mmworking feed: 21.0 mm/secreturn speed: 200.0 mm/secwork height max.: 970 mmControl: PPS-TS Touch total power requirement: 37.0 kWweight: 27500 kgrange L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Special price upon request Equipment:- CNC electro-hydraulic press brakes Intuitive, touchscreen-based user interface Easy navigation Tool and program library Control system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: DELEM feed down: 100 mm/secfeed bending: 10 mm/sectotal power requirement: 15 kWweight of the machine ca.: 11.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 150 mm/secwork speed: 10.0 mm/secreturn speed: 140 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 110 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 15000 kgrange L-W-H: 5000 x 2400 x 2850 mmALPMAC Manufacturer Video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC Product Video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth--------------------------------------------------------! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMAN ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 114100 €: 2156.49 €: 135 to: 3050 mm: 4 : 320 mm: 3340 mm: 500 mm: servomotorischer Riemenan : 100 mm/s: 10 mm/s: 100 mm/s: 650 mm: 250 mm: 4200 mm: 2200 mm: 2550 mm: 7300 kgservomotor drive with multiple switched flat belt system4 axes (Y1, Y2,X, R)CNC control DELEM DA-66S- 2D touchscreen display 17- 3D visualisation in simulation and production- intuitive touch-screen control (simple drawing of the bending outline with your finger)- simple and convenient data transfer- multi-simulation option- user friendly programming in dialogue form- graphic simulation of the bending sequenceservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)safety device BLVT light guardlinear guided sheet support ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 €: 600 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 700 mm: hydraulisch : 80 mm/s: 6,5 mm/s: 80 mm/s: 750 mm: 280 l: 2 x 11 kW kW: 7600 mm: 2650 mm: 3950 mm: 52500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importser ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 123713 €: 2338.18 €: 320 to: 4050 mm: Y1 / Y2 / X Achse : 365 mm: 3600 mm: 450 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 154 mm: 250 l: 18.5 kW: 5250 mm: 1770 mm: 2850 mm: 20000 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52400 €: 990.36 €: 60 to: 1250 mm: 3 (Y1, Y2, X) : 265 mm: 1050 mm: 450 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 110 mm/s: 650 mm: 500 mm/s: 900 mm: 104 mm: 100 l: 7.5 kW: 2300 mm: 1550 mm: 2850 mm: 4700 kgStandard accessories:3 axes (Y1, Y2,X )CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, d ...

: neu : Türkei : 70700 €: 1336.23 €: 100 to: 600 mm: 900 x 500 mm: 800 mm: 400 mm: 220 mm/s: 1 - 20 mm/s: 250 mm/s: 14,65 kW: 1900 mm: 1700 mm: 4400 mm: 6000 kg: 30 - 239 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesPump, valves, and filters from Bosch RextrothHydraulic overload valveCoolerSiemens electrical components8 additional signal inputs and outputs10-inch touchscreenPLC Siemens S7 1200Stroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 220 mmstroke: 8 - 80 mm mmtotal power requirement: 2,2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 0,9 x 1,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3 ttable vertical adjustable: 200 mmtable plate: 450 x 300 mmdayligth: 600 mmram surface: D 230 m mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 16 tthroat: 210 mmstroke: 8-68 mmtable:: 480 x 380 mm strokes per minute: 150 ram adjustment: 50 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 tstroke: 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 400 mmstroke: 355 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180/360 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 500 mmtable:: 1000 - 800 feed down: 150 -280 mm/secfeed under pressure: 10 - 26 mm/secfeed up: 180 - 300 mm/sectable height over floor: 750 mmtotal power requirement: 22 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 €: 1196.75 €: 100 to: 2550 mm: Y1 / Y2 / X Achse : 265 mm: 2200 mm: 450 mm: 530 mm: hydraulisch : 180 mm/s: 10 mm/s: 120 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 100 l: 11 kW: 3800 mm: 1670 mm: 2850 mm: 7800 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 €: 412.8 €: 150 to: fix : 300 mm: 610 mm: 1520 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2470 mm: 3200 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand controltable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080186 : prompt, Zwischenverkauf v : Türkei : 81476 €: 1309.77 €: 1 : 69300 €: 135 to: 3050 mm: Y1 / Y2 / X und RAchse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 120 mm/s: 500 mm: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 150 l: 15 kW: 4250 mm: 1700 mm: 2850 mm: 9580 kgSpecial campaignSpecial price and SKY 22 control free of chargeStandard accessories:4 axes (Y1, Y2,X and R)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7400 €: 142.82 €: 100 to: fix : 300 mm: 1070 mm: 220x160 mm: 5 mm/s: 10 mm/s: 2050 mm: 1000 mm: 2200 mm: 1500 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.