prensas usadas para la venta (1,720)

Cantidad 1 Prensa de extrusión horizontal de acción simple directa de 160 MN de segunda mano Mfc.: SMS Fuerza: 16 000 TM Construido: 2015/2016 Dimensiones de la palanquilla: Ø 610/720 x 750 – 2500 mm Alcance del suministro: Prensa de extrusión de horno de palanquilla por inducción Sistema de enfriamiento Tirador Mesa de salida Camilla sierra de acabado perfil apilador horno de troquel Máquina peladora de palanquillas

Modo de funcionamiento hidroneumático Altura máx. del punzón: 90 mm Carrera de la cruz: 100 mm Carrera de punzonado: 20 mm Fuerza de prensado: 30 kN Altura máx. del perfil: 100 mm Peso: aprox. 280 kg

Key data: 2200 t

Cantidad 1 Prensa de extrusión de segunda mano – 2200 MT Mfc.: Breda Danieli Construido: 2016 Estado: aún en producción Fuerza máxima de extrusión: 21,9 MN a 300 bar Presión máxima de trabajo: 310 bar Tipo de prensa: carga trasera con 2 contenedores Tamaño de palanquilla 8" - longitud: 300 – 1.200 mm Volumen de suministro: prensa de extrusión completa en funcionamiento con sistema hidráulico y eléctrico Manipulador de palanquilla de pellizco por encima de la cabeza Material: Serie AL 6000 Fuera del alcance del suministro: marco de piso montado en el piso de concreto, todos los troqueles y refuerzos de herramientas

Presión: 80 tLongitud de la mesa: 1.200 mmAncho de la mesa: 1.000 mm: 250 mm: 1.200 mm Carga máxima de la mesa: 7.000 kgDistancia entre columnas: 1.100 mmTensión: 400 VPeso de la máquina aprox.: 11,0 tDimensiones de la máquina aprox.: 4,40 x 2,58 x 3,66 m- Fabr.No.: ---

feed under pressure: 2,7 mm/secpressure: 100 tstroke: 400 mmtable surface area: 920 x 560 mmfeed down: 4,25 mm/secfeed up: 8,22 mm/secoil pressure max. in the work cylinder: 385 baroil volume: 26 ldiameter of piston: 125 mmcolumn daylight: 920 mmvoltage: 400 V/ 50 Hztotal power requirement: 4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,7 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• pressure cylinder horizontally moveable,• table can be hydraulically adjust in height,• Cylinder Ø 175 mm, piston base Ø 125 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tstroke: 400 mmtable surface area: 800 x 500 mmfeed down: 4,03 mm/secfeed up: 5,82 mm/seccolumn daylight: 820 mmoil pressure max. in the work cylinder: 400 baroil volume: 26 lvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• Pressure cylinder moveable horizontally,• Working table hydraulical adjustable,• Cylinder Ø 150 mm, piston base Ø 85 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 t, 1200 mm, 1100 mm

Descripción: Esta máquina es utilizada como prensa de prueba o de detección por nuestros clientes. La placa de ariete plegable a 105 permite comprobar la herramienta superior después del proceso de prensado / manchado. Esta máquina también es ideal para el prensado de prueba. Funciona con mucha precisión y se fabrica en un diseño de cuatro columnas muy estable. Esta prensa se entregó por última vez a uno de nuestros clientes en enero de 2024, y actualmente estamos planificando una nueva construcción de esta máquina. Gracias a las cadenas de suministro cortas y a las capacidades de producción multiproceso, podemos tener esta prensa fabricada por nuestra fábrica en España en muy poco tiempo. Si desea cambios técnicos en la altura abierta o el tamaño de la mesa, podemos tenerlo en cuenta durante la construcción. La capacidad de 100 toneladas también puede reducir ...

presión: 150 tcantidad de aceite: 480 lrecorrido de seguimiento: 30 mmdistancia de seguridad: 180 mmdimensiones: 1440x1690x2800 mmpotencia total requerida: 18,5 kWpeso de la máquina aprox.: 4200 kg

Key data: 30 t

La prensa hidráulica se puede utilizar de diversas maneras como prensa de montaje, prensa de series pequeñas, prensa de inserción manual o prensa de calentamiento en prensas de doble columna Diseño (prensa en H) Es posible realizar un recorrido por la prensa en el campamento de Ennepetal. Se trata de una prensa de 2,5 años de antigüedad, sin uso y sin horario de funcionamiento, que se vende con total garantía. Precio de lista: 45.000 Técnicas: Bastidor robusto de la máquina Capacidad: 30 toneladas – a 300 bar Bomba ASC: 28,5 litros/min. Motor: 11 kW – 15 CV Depósito de aceite: 600 × 450 × 500 mm, con aprox. 100 litros Pistón del cilindro: 110 mm Cilindro interior: 70 mm Carrera: 500 mm Avance rápido: 45 mm/s Retorno: 55 mm/s Guías: 50 mm Tablero: 800 × 550 mm – con ranuras en T Placa de émbolo: 700 × 500 mm – con ranuras en T Peso t ...

pressure: 160 tdayligth: 600 mmstroke: 25 - 150 mmtable surface area: 1500 x 900 mmram surface: 1500 x 900 mmram adjustment: 100 mmdaylight between the columns: 1500 mmdaylight between the side columns: 400 x 200 mmdistance between columns: 1680 mmweight of the machine ca.: 15 tdimensions of the machine ca.: 2,7 x 1,8 x 4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 100 tDistancia entre columnas: - mmCarrera: 350 mmTamaño de la mesa: 1150 x 700 mmPotencia total requerida: 11 kWPeso de la máquina CA.: TDimensiones de la máquina CA.: M- Amortiguación de impactos de corte- Cojín de troquel- Sin armario eléctrico

pressure: 100 tthroat: 260 mmstroke: 300 mmtable-size: 500 x 500 mmram head dimension: 650 x 500 mmdayligth: 700 mmoil volume: 600 lcapacity of ejector in table: 40 treturn capacity: 13 ttotal power requirement: 22 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2.07 x 2.48 x 3.3 m- Ejector in the table, pressure 40 t, stroke 100 mm- Laterally movable work area protection with ESPE (light barrier) this with cycle operation- Cooling, behind the machine, backwater boiler (beige) air cooler (grey-blue), along with complete piping and control etc.- Press safe for unrestricted manual insertion operation- Documentation in german availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 315 mmstroke: 16 - 125 mmmax. distance table - ram: 417 mmram adjustment: 70 mmno. of strokes: 80 Hub/mintable surface area: 800 x 630 mmram surface: 500 x 400 mmtotal power requirement: 6 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 1,5 x 2,2 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tthroat: 300 mmstroke: 8 - 110 mmtable surface area: 750 x 600 mmram adjustment: 75 mmram surface: 430 x 230 mmhole in the table: 250 x 150 mmtool hole in ram: 40 mmno. of strokes: 60 + 90 Hub/minweight of the machine ca.: 4,4 ttotal power requirement: 4,5 - 6,8 kWdimensions of the machine ca.: 1,95 x 1,1 x 2,35 mdistance table/ram: Hub unten, Stöß. unten 19 mmdistance table/ram: Hub oben, Stöß. oben 380 mmFurnishing:- with hydraulic clutch-brake combination, with new hydraulics and oil cooler- with gear transmission in oil bath- fixed table prepared for the attachment of tool changing consoles- 2 roller bars in the table- mechanical overload in the ramThe following work is carried out on the machine / partial overhaul:- Machine is completely disassembled, checked, seals changed, defective parts exchanged etc- Machine is repainted- new Balluff cam control- new hydraulic ...

pressure: 63 tstroke: 650 mmthroat: 380 mmtable surface area: 650 x 1000 mmram surface: 650 x 1000 mmdayligth: 850 mmdie cushion stroke: 220 mmdie cushion area: 500 x 520 mmdie cushion capacity: 25 tram stroke speed - under load: Vorlauf 400 mm/secram stroke speed: Rücklauf 330 mm/secdrawing speed: Auf 220 mm/secdrawing speed: Ab 300 mm/secworking height (floor - top of table): 1050 mmtotal power requirement: 18,5 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 1,2 x 2,2 x 3,6 m- die cushionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 10 tcarrera: 400 mmAlimentación: 200 mm/segAlimentación: 450 mm/segTabla de distancias máx. - RAM: 630 mmPotencia total requerida: 8,5 kWPeso de la máquina aprox.: 1,3 tDimensiones de la máquina aprox.: M

pressure: 50 tthroat: 245 mmstroke: 14 / 90 mmram adjustment: 75 mmtable height adjustment: 150 mmstrokes per minute: 42/85 table surface area: 700 x 490 mmram surface: 400 x 230 mmtool hole in ram: 40 mmtotal power requirement: 4 kWweight of the machine ca.: 3,41 tdimensions of the machine ca.: 0,8 x 1,75 x 2,1 mMachine was partially overhauled in our house as follows:- disassembly, cleaning and inspection- table milled over- new paintwork of the machine- shaft crack test carried out- disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals- additional air storage tanks- new control cabinet with safety control and touchscreen display- new wiring of the machine- new Vogel central lubrication system with piping- new Herion press safety valve + maintenance unit- new Balluff cam swith- new 2-hand control panel- new footswitch- Current UVV test with braking time measu ...

pressure: 63 tthroat: 315 mmstroke: 8 - 120 mmtable surface area: 630 x 800 mmdayligth: 560 mmram adjustment: 70 mmno. of strokes: 56/90 Hub/minram surface: 400 x 500 mmtotal power requirement: 6 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 1,5 x 2,2 x 2,75 mThe following work is/was carried out on the machine.partial overhaul:- Machine is completely disassembled, checked- Machine is repainted- new press safety valve- New separate control cabinet with touch panel and ABB safety control- new shaft bearing- A current UVV test and braking time measurement is carried out before deliveryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: - mmstroke: 16 - 125 mmtable surface area: 800 x 630 mmram adjustment: 70 mmno. of strokes: im Dauerlauf 80 Hub/minmax. distance table - ram: 417 mmram surface: 500 x 400 mmclamping plate thickness: 70 mmtotal power requirement: 6 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tthroat: - mmstroke: 250 mmTable dimensions: 2420 x 840 mmram surface: 1850 x 650 mmdayligth: 500 mmram adjustment: 110 mmdistance between columns: 1900 mmtable height: 170 mmno. of strokes: 25 - 45 Hub/mintotal power requirement: 22 kWdimensions of the machine ca.: 2550 x 2370 x 3820 mmweight: 30 t- pneumatic clutch- press safety valve, Herion- cam switch, Balluff- chain break monitoring- hydr. overload, Hydac- motor. alide adjustment with digital display- separate control cabinet with safety control ABB- separate two-hand control panel with foot switch- slidable side protective doors- front protection by light barriers vertical + horizontalThe machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for this ad was created with ...

pressure: 200 tstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2.000 x 1.200 x 2.800 mmControl: Producer: HIDROLIKSANYOM: newType: HD 160Thrust: 160 ton.Stroke: 400 mmThroat depth: 480 mmTotal power requirement: 5,5 kWDistance between frames: 1.200 mmCylinder-Ø: 120 mmDimensions (LxWxH): 1.800 x 1.000 x 2.550 mmWeight: 1.400 kgAdditional information:• solid, welded construction• pressure cylinder lateral adjustable• operating electrical per switch lever /• pressure indication per Manometer• material support per cylinder, adjustable in height• CE-markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tthroat: 260 mmstroke: 16-80 mmtable surface area: 800 x 520 mmdistance table/ram: 350 mmstrokes - infinitely variable: 50 - 250 Hub/minram surface: 400 x 300 mmram adjustment: 70 mmtotal power requirement: 7,5 kWdimensions of the machine ca.: 2,7 x 1,7 x 2,6 mweight of the machine ca.: 4 thole in the table: 260 x 180 mm- pneumatic Ortlinghaus air clutch with additional brake- Infinitely variable speed control using a Stöhrer drive- break plate- 2 hand control- additional clamping plate- Air storage tank for clutch- Circulating oil lubricationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 160 tDistancia entre columnas: mmCarrera: 200 mmSuperficie de la mesa: 2040 x 840 mmGarganta: 450 mmNº de carreras: 30 - 55 Cubo/minluz diurna: 450 mmSuperficie del ariete: 1700 x 800 mmAjuste del ariete: 100 mmPotencia total requerida: 11 kWPeso de la máquina aprox.: 21,1 tDimensiones de la máquina aprox.: 2,2 x 1,94 x H 3,66 m- seguro para el trabajo de incrustación manual- Conversión a Oeste- Barrera fotoeléctrica

pressure: 40 tdayligth: 250 mmstroke: 8 - 50 mmtable clamping surface LxW: 620 x 450 mmtable height over floor: 980 mmno. of strokes: 85 - 500 Hub/mindistance between columns: 680 mmram - range of adjustment: 50 mmnumber of T-slots: 4 ram surface: mmtotal power requirement: 8 kWdimensions of the machine ca.: 2,3 x 2,2 x 2,8 mweight of the machine ca.: 5,8 t- Unidor Tool monitoring- Kaiser gripper feed, band width 180 mm, feed length 150 mm- Kaiser scrap shear on the left side- soundproof claddingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: - mmstroke: 50 mmtable surface area: 875 x 695 mmram surface: 350 x 355 mmram adjustment: 71 mmno. of strokes: 30 - 90 Hub/mindistance between columns: 450 mmweight of the machine ca.: 6,2 tdimensions of the machine ca.: 2,0 x 2,1 x 3,2 mdaylight (stroke down, ram adjustment above): 480 mmFurther information:- the machine is currently being a partially overhauled- the machine was re-equipped with the following components: separate control cabinet with touchscreen including cabling new painting of the individual components in the dismantled stateAfter the partial overhaul, the machine is safe for manual insertionopen tool, a current UVV test is carried out before delivery andbraking time measurement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: - mmstroke: 16 - 125 mmtable-size: 800 x 600 mmforce: 250 cutting surface: 1600 mm²table adjustment range: 220 mmtotal power requirement: 6 kWweight of the machine ca.: 5 tdistance table/ram: 562 mmpress is to be dismantled and partially overhauled:- dismantling and checking- new colors- new control cabinet with ABB safety control and touch screen- current UVV test with brake time measurement and press test book- COnversion to safe operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tdistance between columns: 600 mmstroke: 160 mmtable-size: 560 x 400 mmdayligth: 360 mmram hole: 40 H 7 DIN 810 mmoil volume: 500 lreturn speed: 200 mm/secdie cushion hydr. pressure/stroke: 60 capacity of ejector: 25 ttotal power requirement: 15 kWdimensions of the machine ca.: 1.44 x 0.95 x 2.54 mpressing speed: 27 mm/secreturn speed: 200 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presión: 40 tgarganta: - mmcarrera: 8 - 90 mmtamaño de la mesa: 630 x 430 mmajuste del ariete: 60 mmn.º de carreras: máx. 65 Hub/minrequisito de potencia total: kWpeso de la máquina aprox.: 2480 kgdimensiones de la máquina aprox.: m- inclinable - placa de montaje de mesa - mechan. Protección contra sobrecarga en émbolo (placa de ruptura) - embrague neumático

Presión: 25 tGarganta: 225 mmCarrera: 8 - 85 mmTamaño de la mesa: 560 x 450 mmDimensión de la cabeza del ariete: 360 x 220 mmAjuste del ariete: 55 mmNº de carreras: 80 - 160 Hub/minPotencia total requerida: kWPeso de la máquina aprox.: 2500 kgDimensiones de la máquina aprox.: 1.135 x 1.365 x 2.145 m

presión: 40 tgarganta: 200 mmcarrera: 150 mmsuperficie de la mesa: 600 x 300 mmagujero en la mesa: Dm. 140 mmsuperficie del ariete: 600 x 300 mmluz natural: aprox. 325 mmpotencia total requerida: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: m