prensas usadas para la venta (1,699)

Prensa de forja de matriz abierta de 6500 toneladas HJ / Seonam (Corea) Diseño: Corporación de Europa del Este Instalación: 2006/2008 Tipo de prensa: Sistema hidráulico de aceite de empuje hacia abajo de cuatro columnas Fuerza nominal (presión estática de trabajo de 320 bar): 5.000 toneladas Fuerza de ajuste (presión de trabajo estática de 420 bar): 6500 toneladas Luz diurna: 5.200 mm Carrera de la cruceta móvil: 2.700 mm Diámetro del ariete principal (cilindro central): 1 juego - ¢950 mm Diámetro del ariete lateral (cilindro lateral): 2 juegos - ¢750 mm Diámetro del cilindro de retorno: 2 juegos - ¢300 mm Ancho de la mesa móvil: 2.600×Longitud 6.600 mm Carrera de la mesa móvil (centro a ambos lados 2.750 mm): 5.500 mm Velocidad de aproximación: 300 mm/seg Cilindro principal Velocidad de forja (2.200 toneladas/320 bar): 163 mm/seg Velocidad ...

VORONEZH K8544 Prensa de forja en caliente AÑO : 1980 / 2008 REVISIÓN E INSTALACIÓN FUERZA: 2500ton CARRERA DEL ARIETE : 350 mm TAMAÑO DE RAM : 1120X1070 mm TAMAÑO TOTAL DE LA MESA : 1400X1200 mm NÚMERO DE CARRERAS EN MODO CONTINUO : 60 NÚMERO DE CARRERAS EN MODO MANUAL : 26 ALTURA DE CIERRE : 890 mm CARRERA DEL KNOCK OUT SUPERIOR : 60 mm STOROKE DE KNOCK OUT INFERIOR : 70 mm MOTOR PRINCIPAL: 132KW (CAMBIADO A HYUDAI HEAVY Y2012) DIMENSIÓN TOTAL DE LA PRENSA : 5380X4680X6400 mm REFUERZO HIDRÁULICO NUEVO EN 2007 CONDICIÓN : MUY BUENAS CONDICIONES DE TRABAJO Prensa de recorte disponible

Línea de prensa de forja en caliente Sumitomo de 2000 toneladas Año 2006 Carrera 350 mm (13,78 pulgadas) Golpes por minuto 75 Altura de cierre 850 mm (33,47 pulgadas) SlideAdj. 7 mm (.27 pulgadas) Tamaño de carnero 1200 mm LR X 1300 mm FB Tamaño de la cama 1320 mm LR X 1300 mm FB Sistema de transferencia de 4 etapas Knockout deslizante Knockout inferior Sistema de chatarra Cambiador de troquel doble Zapatos Extra Die Calentador de palanquilla y sierra de palanquilla también disponibles Esta línea fue utilizada por HONDA para hacer engranajes de transmisión, toma una palanquilla, la corta a medida, la calienta a 1300 C y luego la prensa la golpea 4 veces. Puede determinar las partes buenas de las malas, las partes malas se envían a un tanque de enfriamiento, las partes buenas se envían a un transportador de enfriamiento que puede recoger las piezas a mano al final ...

(2) Prensa de forja horizontal Asahi THP500-6 (máquina de cabeza) Año: 2008 Primera carrera: 24 mm Segunda carrera: 50 mm Potencia de arranque: 150 kN Altura abierta: 625 mm Altura cerrada: 425 mm Troquel (WxL): 500x490 mm Punzonado (WxL): 250x350 mm Carrera del carnero: 200 mm Fuerza de forja: 5000 kN Tiempo de ciclismo: 6.5 seg Velocidad de la manivela: 60 RPM Peso de la máquina: 28 t

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 €: 804.11 €: 1 : 42100 €: 60 to: 2100 mm: X und Y Achse : 160 mm: 1700 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 7.5 kW: 2450 mm: 1600 mm: 2235 mm: 4340 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslaser safety device Fiesslermotorized crowning tableintermediate pieces for the upper tool clampingdie holder for 60 mm toolsdie with 4 V openingsupper tool, slightly cranked, sectionedfoot pedaluser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 €: 1196.75 €: 100 to: 2550 mm: Y1 / Y2 / X Achse : 265 mm: 2200 mm: 450 mm: 530 mm: hydraulisch : 180 mm/s: 10 mm/s: 120 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 100 l: 11 kW: 3800 mm: 1670 mm: 2850 mm: 7800 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 €: 600 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3100 mm: 410 mm: 700 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 280 l: 5750 mm: 2500 mm: 4000 mm: 40500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP ...

pressure: 20 ttotal power requirement: 20 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 172500 €: 3260.25 €: 300 to: 500 mm: 1250x1000 mm: 600 mm: 22 mm/s: 2 mm/s: 7.5 kW: 1750 mm: 1500 mm: 2800 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of Lo ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 €: 455.04 €: 40 to: 800 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 €: 160.19 €: 1 : 100 to: horizontal verschiebbar : 300 mm: 1070 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2430 mm: 1500 kgdemo machine / mint conditionnet price (price for new machine € 9.000,00)horizontally displaceable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 €: 412.8 €: 150 to: fix : 300 mm: 610 mm: 1520 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2470 mm: 3200 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand controltable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 €: 1857.87 €: 135 to: 3050 mm: Y1 / Y2 / X und R Achse : 265 mm: 2600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 200 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 4200 mm: 1680 mm: 2750 mm: 9500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES,  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13200 €: 253.44 €: 100 to: horizontal verschiebbar : 300 mm: 1570 mm: 220x160 mm: 5 mm/s: 10 mm/s: 2560 mm: 1000 mm: 2480 mm: 1755 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070224 : September 2026, Zwischenv : Türkei : 25700 €: 490.87 €: 15 to: 1.4 mm: 320 mm: 490 mm: 130 mm: 1 - 40 mm: 200 1/min: 4 : 40 mm: 30 mm: 210 mm: 215 mm: 1.5 kW: 1160 mm: 1180 mm: 1730 mm: 922 kgWelded steel frame construction4-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsTwo-hand and foot pedal operationManual stroke adjustmentManual ram adjustmentVariable stroke rate via frequency converterOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationTouchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs2 free cams for connecting peripheralsAutomatic central lubricationEquipment in ac ...

: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 €: 209.28 €: 1 : 150 to: horizontal verschiebbar : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2480 mm: 1870 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...

: neu : 2025 : 080091 : prompt, Zwischenverkauf v : Türkei : 51120 €: 966.17 €: 1 : 60 to: 2550 mm: Y1 / Y2 und X Achse : 160 mm: 2150 mm: 250 mm: 350 mm: hydraulisch : 120 mm/s: 9 mm/s: 70 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 813 mm: 104 mm: 100 l: 5.5 kW: 3250 mm: 1200 mm: 2350 mm: 4250 kg3 axes (Y1, Y2, and X axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC controlled crowning tableintermediate clamps for upper toolupper ...

: neu : 2025 : 080109 : prompt, Zwischenverkauf v : Türkei : 68282 €: 1135.89 €: 1 : 1 : 60100 €: 120 to: 3050 mm: Y1 / Y2 / X und R Achse : 180 mm: 2550 mm: 250 mm: 375 mm: hydraulisch : 100 mm/s: 9 mm/s: 77 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 878 mm: 104 mm: 150 l: 11 kW: 3750 mm: 1230 mm: 2400 mm: 5900 kg4 axes (Y1, Y2, X and R axes)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC controlled crowning tableintermediate clam ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 3800 €: 20 to: fix : 825 mm: 520 mm: 1150 mm: 500 mm: 1800 (PSS: 1950) mmThe table can be lifted manuallyHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 20 TL: 1 speed 4 mm/s, single-hand control with lever € 3.800,00 PSS 20 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 4.500,00 PSS 20 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 5.100,00 PSS 20: same as PSS 20 NC but with stroke 500 mm € 5.200,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7308 : prompt, Zwischenverkauf v : Italien : 2400 €: 1 : 10 to: fix : 150 mm: 850 mm: 520 mm: 170 kgWith handpump with 2 speedsAccording to CE regulationsUser manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: 1500 mm: 300 mm: 7.5 kW: 2630 mm: 1000 mm: 2275 mm: 2500 kg: 1 : 680 mm: 1520 mm: 5 mm/s: 10 mm/s: 6 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand operating panelheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 €: 2606.31 €: 220 to: 6050 mm: Y1 / Y2 / X Achse : 265 mm: 5100 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 1050 mm: 154 mm: 250 l: 22 kW: 7500 mm: 1770 mm: 3350 mm: 20800 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010  ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7321 : prompt, Zwischenverkauf v : Türkei : 12500 €: 216.96 €: 1 : 11300 €: 150 to: horizontal verschiebbar : 300 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2630 mm: 1000 mm: 2480 mm: 2100 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Türkei : 70700 €: 1336.23 €: 100 to: 600 mm: 900 x 500 mm: 800 mm: 400 mm: 220 mm/s: 1 - 20 mm/s: 250 mm/s: 14,65 kW: 1900 mm: 1700 mm: 4400 mm: 6000 kg: 30 - 239 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesPump, valves, and filters from Bosch RextrothHydraulic overload valveCoolerSiemens electrical components8 additional signal inputs and outputs10-inch touchscreenPLC Siemens S7 1200Stroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 €: 1130.22 €: 100 to: 400 mm: 800 x 500 mm: 500 mm: 110 mm/s: 10 mm/s: 160 mm/s: 11 kW: 1900 mm: 1700 mm: 2930 mm: 5500 kg: 250 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesT-slots can be configured according to customer requirementsPump, valves, and filters from Bosch RextrothHydraulic overload valveHydraulic proportional valveCoolerSiemens electrical components8 additional signal inputs and outputs7-inch touchscreenSiemens S7 PLCStroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickCategory 4 sensors and photoelectric switchTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution o ...

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 €: 400 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 4000 mm: 2600 mm: 20500 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.900 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:160 tthroat:480 mmstroke fix:fix 180 mmno. of strokes:25 - 70 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1100 x 900 mmHole in the table:450 mmtable height over floor:900 mmpassage to the back:700 mmram surface:900 x 600 mmram adjustment:144 mmpower requirement:30,75 kWweight:15,3 tdimensions (WxDxH):2,0 x 2,4 x 3,75 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Desch overload protection in ram:hydraulic ram counterbalance:pneumatic