rectificadoras madera usadas para la venta (640)

Auction-ID: A7-49302-24

Auction-ID: A1-49210-295

Auction-ID: A7-49302-53

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Este lote no ha sido probado para su funcionamiento. Las piezas pueden estar dañadas o faltantes. El vendedor no asume ninguna garantía de seguridad operativa; El kilometraje, las horas de funcionamiento y otros datos deben entenderse como valores de directrices no vinculantes. No se garantiza la corrección de la información; Auction-ID: A1-48334-87

Table dimensions: 1250 x 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: min / max: 10 / 250 mmgrinding depth: 400 mmexternal diameter: max. 380 mmswing dia.: 390 mmtable:: table travel: max. 550 mmstroke of the table: min. 2 mmrapid traverse: 10 m/mintable speed -stepless-: 0 - 10 m/minrough adjustment: 18 mmfine adjustment: 4 mmmax. workpiece weight: 100 kgWorkhead.: spindle head: B 6 DIN 55021spindle turning speed - stepless: 15 - 1.500 U/minpivoting angle: +/- 30 Gradspindle bore: 50 mmpower capacity: 2 kWinternal grinding:: rapid traverse: 0 - 250 mm/minstroke: 70 mmpower requirement: 3 kWtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 3,0 x 3,0 x 3,2 mDocuments: exhaust fan: Fibaron paper band filter: Polo Fire extinguish system: Deugra Internal Grinding MachineBAHMÜLLER - JES 12- new control (July 2015)The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 250 mmturning speeds: 1000 - 4000 U/mintable surface area: 600 x 200 mmgrinding wheel size: 225 x 20 x 51 mmgrinding spindle drive: 1,5 kWtable feed: 1 - 20 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,6 x 1,6 x 1,8 mAutomatic feed, 2-axis digital display, stepless speed control,Water-cooled sine angle magnetic clamping plate 400x135mm, 10mm magnetic pitchSony digital display with scales for transverse and height adjustmentSwing-out dresser on the grinding headTable direction reversal with contactless inductive switchesLOSMA belt filter coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmLÖWER-DoubleSander Solid DSM 2004----------------------------------Double-sided four-belt single wood sander forSanding solid wood such as window frames etc.Highly stable top design with innovative details. Suitablefor high continuous loads even with higher chip removals.- sanding units arranged one after the other for pre-grinding,Fine sanding and finishing sanding, each from above and below1. Belt sanding unit with heavy steel roller2. Belt sanding unit with rubberized roller and shoe3. Finishing unit with fiber brush- Directly driven grinding rollers for slip-freePower transmission- maintenance and wear-free CERMET-coated grinding wheelsshoes with very good thermal conductivity and absoluteDimensional accuracy- External cooling of the grinding zones for cooler grindingand longer sanding belt service life- f ...

Table dimensions: 1200 x 500 mmsanding belt measurements: 90 mmWeight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...

Auction-ID: A1-48377-25

Auction-ID: A7-49056-174

Auction-ID: A1-48474-96

Working width: 300 mmNumber of sanding units: 1 st.Workpiece thickness max.: mmsanding belt measurements: mmMotor roller: kWMotor pad: kWFeed motor: kWFeed speed: m/min.Overall size: mmWeight: ca. 450 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Oscilación: ja ja / nein: ja ja/nein: ja ja/neintiltable hasta: 30 GradMotor de salida: 2,8 kWTdimensiones permitibles: 850 x 300 mm ancho de arenado: 150 mmPeso: 330 kgLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Dimensiones de la mesa: 800 x 2790 mm Garganta: 550 x 310 mm Potencia del motor: 4,0 kw Medidas de la banda de lija: 150 x 7800 mm: : : 2600 Ancho de trabajo: 850 mm Salida del motor: kWLento de papel de lija: mmCapa de succión de polvo: 180 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Number of sanding units: 4 st.sanding width: max. 200 mmSanding height max.: 7-150 mmWorking speed: 8-16 m/minBand Speed: 18-30 m/secStähle-Hess Sanding Machine Saturn-Duo-----------------------------------------------Manufacturers Technical Description:Stähle-Hess Finish Sanding Machine, Model Saturn DuoFeaturing 2 sanding units, plus additional upper and lower Roto-Finishsanding units.1 Upper sanding belt1 Lower sanding belt2 Upper Roto-Finish sanding units2 Lower Roto-Finish sanding unitsWorkpiece DimensionsHeight: 7–150 mmWidth: max. 200 mmMinimum length: 300 mmBelt speed: 18–30 m/s (variable)Feed rate: 8–16 m/min (variable)-----------------------------------------------Price for the above-mentioned machine available upon request!-----------------------------------------------Note: This machine was previously used in conjunction with aWeinig Variomat four-sided planer/moulder ...

Number of sanding units: 2 st.sanding width: 300 mmSanding height max.: 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brushing machine brand: Ecoline Type: Rustikmat 2-1000 New machine 2 brushes More stability due to the lower brush position Length of the brushes 1000 mm; Diameter 270 mm. Power 4 kW per brush. Each brush can rotate in synchronism and counter-rotation. Working width: 1000 mm Working thickness: 120 mm. Workpiece dimensions: Min. length: 350mm Max. Width: 1000mm Max. Thickness: 120mm Electric adjustment of thickness, speed and feed with digital display. Spindle diameter 50 mm. Infinitely variable feed: 0 - 12 m/min. The speed of the brushes and the feed speed are controlled by frequency converters. The heavy machine bed allows deep structuring of the plates.

Brush grinding machine Brand: Ecoline Type: B Sand 5 New machine The B Sand 5 as a high-quality solution for your production. The individual equipment offers many possibilities. In addition to panels and profiled doors, sash surfaces can also be processed, for example. A perfect result for different types of materials and surfaces: - Solid wood, MDF, veneered parts... - impregnated, primed surfaces... Technical data: Workpiece dimensions: Min. length: 550 mm Min. thickness: 10mm Max. Width: 1550 mm Max. Thickness: 120 mm Power: 11 kW Air pressure: 6-8 bar Suction nozzle: 6 x Ø120mm unit - vertical swiveling brushes for grinding the edges. diameter 400mm per brush, 2 motors á 1,1 kW - Horizontal sanding lamellar roller diameter 420mm, length 1600mm, 3 kW motor - Cross brush for sanding the wood fibers diameter 40mm, 1,5 kW motor - 2 round b ...

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,

Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996