Instalaciones de llenado de botellas TETRA PAK / SIDEL... Tetra Alblend 10 / TA Drink...

​Complete line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of manufacturing: 2005, Serial number: T5842850029, Mixer with a mixing ratio range: 1:2 – 1:5, 2. Pasteurizer, Manufacturer: Tetra Pak, Model/type: Tetra Aseptic Drink 100 / TA Drink 100, Year of manufacturing: 2005, Serial number: T5841110569, Pasteurizer with tubular heat exchanger, heat recovery, intermediate primary heating agent (steam / hot water/ product) and intermediate cooling agent (water with propylene glycol/treated water/product), a. There are 2 capacities, depending on the bottle size: 18.000 l/h and 27.000 l/h, b. Pasteurization temperature: currently running on 94-96 °C holding time between 20 and 40 seconds, realized by configuration of holding tubes., c. Inlet temperature: 20 °C – outlet temperature 30 °C - 35 °C, d. Efficient vacuum deaeration system with dearator – DO for output product with <2ppm, 3. Sterile buffer tank, Manufacturer: Holvrieka, Model/type: Tetra Alsafe HA20000, Year of manufacturing: 2005, Serial number: T5841610066, Volume: 21.264 liters, Jacketed, Temperature 0 / 148 °C, Pressure: -1 / 3,5 Bar, Including steam barriers and N2 head space., 4. Blow molding machines (2 pieces), Manufacturer: Sidel, Model/type: SBO 12 Serie 2+, Year of manufacturing: 2005, Serial numbers: 5607 and 5608, Capacity: 18,000 bottles / hour each., Upgraded with new preform chain design, pre-blowing and blowing block valve optimized in 2025., Bottle moulds are excluded , 5. Caps feeder, Manufacturer: Sidel, Model/type: Cap Feeder 2024, 6. Conveyors, 1. Air conveyors (Sidel) between blowers and filler, 2. Bottle accumulation table and conveyors, 3. Pallet conveyors, 7. Empty bottles inspectors and caps inspectors, Manufacturer: Presco Technology Inc, Model/type: Intellispec 4.0.012, Year of manufacturing: 2005, Serial number: 6627, Digital cameras (2 pieces), 8. Aseptic filler, Manufacturer: Sidel, Model/type: SF ASPT FMi 70/20C, Year of manufacturing: 2005, Serial number: 3042, Decontamination areas for bottles and caps and 70 filling vales with sterile design., Change parts for 0,4L, 0,5L and 1,5L bottles., Filling speed:, a. 36.000 bottles / hour for 0,4 and 0,5 liter bottles., b. 18.000 bottles / hour for 1,5 liter bottles., 9. Aseptic Nitrodoser, Manufacturer: VBS, Liquid N2 dosing system with sterilization module, 10. Capper (aseptic), Manufacturer: Zalkin, Model/type: I20/720, Year of manufacturing: 2005, Serial number: 6169, Upgraded for tethered caps 38 mm, 11. Data coder, Manufacturer: Videojet (ink), Tradability connection – communication with filler PLC, 12. Full bottle inspector (filling level and caps), Manufacturer: Heuft, Model/type: SpectrumII VX CAP, Year of manufacturing: 2025, Serial number: 25G106934, 13. Roll on labeling machine, Manufacturer: Krones, Model/type: Contiroll, Year of manufacturing: 2012, Serial number: K810831, Speed: 42.000 bottles / hour, 14. Sleever labeling machine with inspector and steam oven, Manufacturer: Krones, Model/type: Sleevematic TS1, Year of manufacturing: 2017, Serial number: K815004, Speed: 42.000 bottles / hour, Automatic sleeve feeding system with a magazine of 6 sleeve reels and automatic change, including buffer, Labeling inspector, Sleeve steam oven, 15. Packer, Manufacturer: Zambelli, Model/type: LFT 60 CS, Year of manufacturing: 2005, Serial number: 166615445, Capacity: 3.000 packs / hour, Upgraded in 2025 (film feeding and cutting system and software), 16. Palletizer, Manufacturer: Sidel / Cermex, Model/type: P422.20, Year of manufacturing: 2005, Serial number: 35755, 17. Stretch wrapper, Manufacturer: Robopac, Model/type: HELIX HS 40, Year of manufacturing: 2005, Serial number: 305040132, Upgraded in 2015, Additional features:, Bottle moulds for the blowers are excluded , All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak., ​Over the years, all main electronic components are upgraded and updated according to the OEM, based on availability on the market and latest models, Line general cond...
seller offer No. resale 1586