trabajo con chapas de metal usadas para la venta (3,272)

material width:150 mmmaterial thickness:1,5 mmpower requirement:3,0 kWno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:4 weight:0,67 tDimensions (WxDxH):1,3 x 1,1 x 1,6 m

max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step

material width:150 mmmaterial thickness:2,5 mmfeed length:100 mmcompressed air:6 barclamping force of fastening pincer:2000 Nclamping force of moving pincer:2000 Nfeeding force:1200 Nweight:0,1 tDimensions (WxDxH):0,35 x 0,85 x 0,5 m

material width:850 mmmaterial thickness:0,3 - 1,5 mmno. of straightening rolls:8 straightening roll diameter:40 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmmaterial thickness with 600 mm material width:1,9 mmmaterial thickness with 400 mm material width:2,3 mmspeed:5 - 25 m/minmin. material width:200 mmweight:2,8 tDimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mmmaterial thickness:0,3 - 1,5 mmno. of straightening rolls:8 straightening roll diameter:40 mmnumber of draw-in rolls:2 diameter of draw-in rolls:160 mmmaterial thickness with 600 mm material width:1,9 mmmaterial thickness with 400 mm material width:2,3 mmspeed:5 - 25 m/minmin. material width:200 mmweight:3,1 tDimensions (WxDxH):2,2 x 1,5 x 2,8 m

material width:300 mmmaterial thickness:- 3,0 mmno. of straightening rolls:7 Stückstraightening roll diameter:60 mmweight:0,8 tDimensions (WxDxH):0,9 x 1,5 x 1,4 m

table length:2000 mmtable width:600 mmtable height:300 mmmounting surface:700 x 600 mmcentre distance:1200 mmcentre height:160 mmDimensions (WxDxH):2,0 x 0,6 x 0,3 m

material width:380 mmcoil weight:1,0 tmaterial thickness:2,5 mmcoil external diameter:1000 mmno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:2 diameter of draw-in rolls:90 mmweight:0,8 tDimensions (WxDxH):0,8 x 1,3 x 1,7 m

material width:500 mmmaterial thickness:0,6 - 1,6 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 + 2 inlet roll diameter:60 mmmax. material thickness:2,0 mmmaterial thickness at 150 mm material width:2,0 mmmaterial thickness at 500 mm material width:1,6 mmweight:0,5 tdimensions (WxDxH):0,8 x 1,0 x 1,2 m

material width:400 mmcoil weight:3,0 tmaterial thickness:0,5 - 4,0 mmcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmno. of straightening rolls:9 straightening roll diameter:50 mmno. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mmmaterial cross-cut:1600 mm²speed of coil line:0 - 20 m/minpower requirement:35,0 kWweight:10,5 tdimensions (WxDxH):10,0 x 2,5 x 2,9 mstraightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mmmaterial thickness:0,6 - 2,5 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 + 2 diameter of draw-in rolls:60 mmmax. material thickness:3,5 mmmaterial thickness at 30 mm material width:3,0 mmmaterial thickness with 300 mm material width:2,5 mmweight:0,3 tDimensions (WxDxH):0,9 x 1,0 x 1,1 m

material width:550 mmmaterial thickness:0,4 - 1,6 mmno. of straightening rolls:11 straightening roll diameter:60 mmnumber of draw-in rolls:4 diameter of draw-in rolls:60 mmband speed:4 - 50 m/minpower capacity:3,0 kWweight:1,7 tDimensions (WxDxH):2,5 x 2,0 x 1,7 m

Controlador CNC Delem DA-65R, presión de flexión 1100 kN, longitud de trabajo 3100 mm, capacidad - 7,5 kW, voltaje - 3PH 380 voltios, aceite hidráulico - 120 l Auction-ID: A7-46486-1

material width:320 mmcoil weight:2,6 tmaterial thickness:0,5 - 2,0 mmcoil internal diameter:400 - 510 mmcoil external diameter:1200 mmno. of straightening rolls:7 straightening roll diameter:50 mmnumber of draw-in rolls:2 band speed:0 - 30 m/minpower capacity:1,5 kWweight:1,5 t

Auction-ID: A7-47249-60

Auction-ID: A3-43544-21470

material width:120 mmmaterial thickness:0,4 - 4,0 mmno. of straightening rolls:19 straightening roll diameter:24 mmmaterial cross-cut:120 mm²:40 mmbending speed:5 - 25 m/minweight:0,85 tdimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber

material width:400 mmmaterial thickness:0,6 - 2,8 mmno. of straightening rolls:5 straightening roll diameter:40 mmno. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mmmaterial thickness at 65 mm material width:2,8 mmpower capacity:3,0 kWweight:0,45 tDimensions (WxDxH):0,8 x 1,8 x 1,35 m

material width:250 mmmaterial thickness:0,2 - 2,0 mmno. of straightening rolls:7 straightening roll diameter:60 mmrun-in height:1250 mmpower capacity:4,0 kWweight:0,65 tDimensions (WxDxH):1,05 x 1,25 x 1,5 m

material width:250 mmmaterial thickness:0,4 - 3,5 mmno. of straightening rolls:9 straightening roll diameter:30 mmspeed:3 - 15 m/minmaterial thickness at 250 mm material width:3,0 mmmaterial thickness at 200 mm material width:3,5 mmpower capacity:1,8 kWweight:0,9 tDimensions (WxDxH):1,45 x 1,4 x 1,55 m

material width:200 mmmaterial thickness:0,8 - 3,0 mmno. of straightening rolls:6 straightening roll diameter:53 mmnumber of draw-in rolls:2 diameter of draw-in rolls:96 mmmaterial cross-cut:400 mm²speed:3 - 15 m/minpower capacity:0,75 kWweight:0,5 tDimensions (WxDxH):1,0 x 1,0 x 1,4 m

sheet width: 3050 mmplate thickness: 2.5 mmthickness at Niro-steel: 1.5 mmno. of strokes: max. 35 Hub/mincutting angle: 2°10 table height: 905 mmtable width: 390 mmback stop - adjustable: ca. 750 mmControl: konv. engine output: 3.0 kWweight of the machine ca.: 1750 kgrange L-W-H: 3730 x 2070 x 1400 mm New price approx. 45.000 euros () Special price on requestEquipment:- robust / motorized swing cut guillotine shears- Machine with electric material / backgauge Traverse path approx. 750 mm (infinitely variable adjustment range) analog position indicator Manual adjustment from the front- unbreakable and torsion-free welded steel construction- Compact and clear machine construction- 1x hold-down beam- Integrated sheet holding system for thin sheet blanks- sheet/cut material removal at the front (operator side)- 1x side stop with mm scale- Extendable table extension (approx. 350 mm)- 1x free ...

plate thickness:4 mmblade length:180 mmweight of the machine ca.:21 kgdimensions of the machine ca.:400 x 100 x 1500 mm

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 €: 180.26 €: 48 mm: 570 mm: 410 mm: 1000 mm: 110 kg: 6 cm³: 48 x 3,5 mm: 11/2 x 3.68 mm: 54 x 1,5 mm: 50 x 4 mm: 48 x 2 mm: 48 x 2 mm: 60 x 3 mm: 64 x 2 mm: 64 x 2 mm: 60 x 2 mm: 50 x 4 mm: 32 mm: 45 x 16 stehend, 45 x 25 mm: 300 mm: 10 mm: 10 mm: 2/3 U/min: 1.5 kW3 phasedigital display of bendmaterial spring back compensationquick-change tooling system2 hexagonal tool holdersaccurate counterbending die positioningportable with base wheelsfootswitchusers manualALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST):SB 48M (single phase, 2 r/min) Model with TCPlus control on requestMACHINE-KIT WITH TOOLS (PRICES ON REQUEST):Art.Nr.maschinetuberadiusSB 48M K2DSB 48MGas inch2 x ØSB 48T K2DSB 48TGas inch 2 x Øtools:Ø 1/2", (21,3 mm), R46Ø 3/4", (26,9 mm), R56Ø 1", (33,7 mm), R67Ø 1", 1/4 (42,25 mm), R90 ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 €: 1583.82 €: 2550 mm: 15 mm: 15 mm: 13 mm: 12 mm: 12 mm: 10 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 4760 mm: 1660 mm: 1155 mm: 8950 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe ...

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-47248-26

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 €: 2009.83 €: 150 mm: 1000 mm: 1900 mm: 1475 mm: 2700 kg: 170 cm³: 150 x 7,1 mm: 6 x 7,11 mm: 150 x 9 mm: 141,3 x 6,55 mm: 141,3 x 6,55 mm: 168,3 x 9 mm: 168,3 x 9 mm: 64 x 6 mm: 88,9 x 3,65 mm: 110 mm: 150 x 45 stehend, 150 x 6 mm: 800 mm: 100 mm: 10 mm: 1 U/min: 15 kWTCPlus Control with 7 TouchscreenProgrammable bending speed for each individual bendPossibility to bend left and rightUsers manaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0125 : 122 €: 1 : 835 mm: 0,4 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.