trabajo con chapas de metal usadas para la venta (3,367)

diámetro del tubo: 12-54 mm (Kupfer / Edels. mmnúmero de serie: EBD 022 99 002 modo de funcionamiento: Schneiden/ Entgraden / Re velocidad: Rollen 450 U/min m/min

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de la hoja: 1020 mmespesor de la placa: 2,5 mmdistancia entre columnas: 1050 mmapertura de la luz diurna: mm: 135 potencia total requerida: Handbetrieben kWpeso de la máquina aprox.: 0,32 tdimensiones de la máquina aprox.: 1,4 x 0,6 x 1,3 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.

Diámetro del tubo: bis 60 mmPeso de la máquina aprox.: 1,8 t

: 30 mm: 30 mmL-beam: 20 x 20 x 4 mmflat steel: 25 x 6 mmAxis diameter: 20 mmwork speed: 11 U/mintotal power requirement: 0,2 kWweight of the machine ca.: 80 Kgdimensions of the machine ca.: 0,6 x 0,6 x 1,5 mProfile bending machine with:- Foot pedal for right/left rotation- Digital display- 1 set of standard rollers- 3 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 610 mmplate thickness: 1,0 mmdistance between columns: 620 mmdiameter of upper rolls: 38 mmtotal power requirement: Handbetrieben weight of the machine ca.: 40 Kgdimensions of the machine ca.: 950 x 270 x 360 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 3 mmdistance between columns: 1600 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 2,06 x 2,14 x 1,21 mDemonstration machine with small paint damage.The machine works quietly and is powered by its geared motorBraking system energy-saving.Our machine is welded as a monobloc body from ST42 quality material.The knives of the machine are of 2379 quality and the brand name is BOHLER.These high-quality knives guarantee precise cutting.Emergency stop button, foot switch and finger guard are includedstandard equipment.(Documentation in English only)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de la hoja: 915 mmespesor de la placa: 1,0 mmdistancia entre columnas: 920 mmapertura de la luz natural: mm: 135 requisito de energía total: Handbetrieben peso de la máquina aprox.: 96 Kgdimensiones de la máquina aprox.: 1170 x 400 x 480 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.

: máx. 16 mmborde cuadrado de acero: 16 mmbarra redonda de acero: 16 mmpeso: 45 Kg: 180 dimensiones: 0,4 x 0,4 x 1,1 m

weight max.: 100 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 tworkpiece diameter: 850 - 5500 mmdrum diameter: 450 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 tworkpiece diameter: 750 - 5000 mmdrum diameter: 450 x 180 mmfeed: 100 - 1000 mm/mintotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Está disponible una máquina de corte y punzonado láser Trumpf con un defecto desconocido (amplificador lineal en orden). Fuerza de prensado: 220 kN, potencia del láser: 1500 W (1,5 kW), diámetro máximo de punzonado: 76 mm, dimensiones máximas de la pieza de trabajo X/Y: 2585 mm/1280 mm, espesor máximo de la hoja acero dulce/acero inoxidable/aluminio: 8 mm/6 mm/4 mm, peso máximo de la pieza: 200 kg, dispensador de piezas X/Y: 500 mm/500 mm, posiciones del cargador: 18, dimensiones de la máquina X/Y/Z: aprox. 8000 mm/7500 mm/2400 mm, peso: aprox. 16000 kg. Es posible la inspección in situ.

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3 ...

Key data: 2000 mm, 3 mm

Ajuste de la longitud de corte, pedal, sin tope La máquina es reparada, revisada, limpiada por un profesional y luego es completamente funcional. Se realiza una prueba de funcionamiento (o en el estado actual por 3.500 €) Ancho de la hoja: 2000 mm Espesor de la chapa de acero: 3,0 mm Color: blanco Peso de la máquina: 2500 kg Dimensiones: 2800 x 1800 x 1500 mm con ajuste de la distancia de corte Tensión conectada: 16 A Sujeción: hidráulica Proyección de columna: 250 mm Proyección: 60 mm Ángulo de corte fijo Número de máquina: 2892

Capacidad máx. de punzonado y cizallamiento: 400 kN Por ejemplo, perfora agujeros de 20 mm en acero de 15 mm Cizallas en la cizalla plana de acero en acero de 120 mm a 12 mm Más datos técnicos a petición Con un surtido de sellos y troqueles según se desee

Ancho de la hoja: 700 mmEspesor de la placa: 4,0 mmDistancia entre columnas: 720 mmDiámetro de los rodillos superiores: 95 mmPotencia total requerida: 1,1 KWpeso de la máquina aprox.: 0,37 tdimensiones de la máquina aprox.: 0,95 x 0,76 x 1,25 mm

ancho de la hoja: 1000 mmespesor de la placa: 3,3 mmdistancia entre columnas: 1050 mmdiámetro de los rodillos superiores: 90 mmrequisito de potencia total: 1,1 KWpeso de la máquina aprox.: 0,39 tdimensiones de la máquina aprox.: 1,4 x 0,9 x 1,2 mmDobladora de chapa con dimensiones especiales:- Capacidad 700 x 4 mm- Doblado cónico- Rodillo superior abatible- Dispositivo de seguridad de liberación de emergencia- Documentación- 400V

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtube diameter: 140 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la placa: 2,5 mmDiámetro del rollo: 98 mmGarganta: 160 mmPotencia total requerida: 1,5 kWPeso de la máquina aprox.: 0,35 tDimensiones de la máquina aprox.: 550x1400x1500 mSe entrega con:• Versión hidráulica• 4 juegos de ruedas• Pedal de control• Motor de freno• Parada de emergencia

round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 80 x 80 x 8 mm: 200 x 13 / 350 x 6 mm: 40 tthroat: 175 mmwork stroke: 32 mmwork height max.: 980 mmhole diameter in sheet thickness: 20 x 15 / 38 x 8 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tDimensions (LxWxH): 1,0 x 0,8 x 1,3 0Profile steel scissors with- 1 foot trigger- Support tables- Rectangular notcher- Hole punch including toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 x 5 mmborde cuadrado acero: 16 x16 mmbarra redonda acero: 18 mmviga L: 100 x 8 mmdimensiones: 400 x 290 x 280 mmpeso: 35 Kg

ancho de la chapa: 2000 mmespesor de la placa: 8 mmpredoblado: potencia total requerida: 7,5 kWpeso de la máquina aprox.: 3,6 tdimensiones de la máquina aprox.: 3600x1250x1350 m

Espesor de la placa: 1,2 mmDiámetro del rollo: 62 mmGarganta: 100 mmPotencia total requerida: 0,75 kWPeso de la máquina aprox.: 130 kgDimensiones de la máquina aprox.: 1,1 x 0,5 x 1,3 mLa máquina de rebordeado está equipada con:- Interruptor de emergencia- Interruptor de pie- 7 piezas. Juegos de rollos

ancho del material: 1015 mmespesor del material: 1 mmvelocidad: von Peso de la mano: 240 Kgdimensiones: 1420 x 600 x 750 m

sheet width: 1050 mmplate thickness: 3 mmdistance between columns: 1100 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 1,7 x 2,1 x 1,3 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.