fresadoras usadas para la venta (2,373)

Adjunto hay algunas fotos de nuestro Maho MH-C 800, que nos gustaría vender. La máquina se sometió a un reacondicionamiento en 2015. La máquina está conectada a la red y se puede ver.

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally t ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

Rectificadora, pulidora, fresadora de ejes Características técnicas: - Velocidades de 850 a 12000 rpm - Eje flexible aprox. 2 m - Tren de rodaje móvil - Adecuado para herramientas de esmerilado y pulido - Tracción 380 V / 1.0 hp - Necesidad de espacio aprox. 500 x 500 x 500 mm - Peso aprox. 45 kg - Tren de rodaje móvil

GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC a ...

GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...

x-travel: 450 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-axes digital read outhorizontal and vertical milling spindlequillTechnische Daten / technical details:Längsweg X / X-travel longitudinal 450 mmQuerweg Y / Y-travel cross 300 mmSenkrechtweg Z / Z-travel vertical 350 mmTischgröße / table size 800x400 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpmVorschubbereich / feed range 8-400 mm/min.Antriebsleistung / power capacity 3,2 kWGewicht der Maschine / weight 1500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 400 mm, 400 mm

Deckel FP 4M Active con pantalla digital activa de 3 ejes, Año de fabricación 1996 Área de sujeción de la mesa 800 x 460 mm Recorrido X / Y / Z 500 / 400 / 400mm Velocidad del husillo 50 - 2500 rpm Velocidad de avance 8 - 630 mm/min Recorrido rápido 1500 mm/min Carrera de la caña 90 mm Portaherramientas SK 40 Abrazadera de herramienta hidráulica ¡Muy buen estado!

Está disponible una fresadora fina CNC Iselautomation KG con husillo defectuoso. Recorrido X/Y: 400 mm/200 mm, dimensiones de la máquina X/Y/Z: aprox. 1200 mm/900 mm/1600 mm, peso: aprox. 500 kg. Es posible la inspección in situ.

La fresadora polivalente LAGUN FTV2 es una máquina herramienta versátil que puede utilizarse tanto en la producción de una sola pieza como en la producción de pequeños lotes. Impresiona por su diseño robusto, su mecanizado preciso y su larga vida útil. Equipo: - Modos de funcionamiento manual y automático - Indicador de posición digital (DRO) de tres ejes Fagor - Sistema de refrigeración - Iluminación en la zona de trabajo Condición: - defectuosa, rueda dentada desgastada, cabezal de fresado ya desmontado, la sustitución de la rueda dentada ya no era posible debido a la insolvencia, los costes de las piezas de repuesto según el antiguo operador aprox. 1.500 EUR. Características técnicas: Avance longitudinal manual/automático (X): 830/745 mm Avance transversal (Y): 406 mm Avance vertical (Z): 406 mm Potencia del husillo de accionamiento: 3,7 kW Mo ...

La fresadora polivalente LAGUN FTV2 es una máquina herramienta versátil que puede utilizarse tanto en la producción de una sola pieza como en la producción de pequeños lotes. Impresiona por su diseño robusto, su mecanizado preciso y su larga vida útil. Equipo: - Modos de funcionamiento manual y automático - Indicador de posición digital (DRO) de tres ejes Fagor - Sistema de refrigeración - Iluminación en la zona de trabajo Condición: - Las máquinas están en buen estado técnico y visual. Características técnicas: Avance longitudinal manual/automático (X): 830/745 mm Avance transversal (Y): 406 mm Avance vertical (Z): 406 mm Potencia del husillo de accionamiento: 3,7 kW Montaje del cono del husillo/cabezal de fresado: ISO 40 Diámetro del husillo: 85,70 mm Capacidad: 127 mm Distancia desde la máquina de husillo mín./máx.: 165/735 mm Velocid ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical40/40/40 m/minFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine, chain vert., 60 pocketsTool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle tape ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical40/40/40 m/minFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance betwee ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-S ...

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (sui ...

x-travel: 350 mmy-travel: 150 mmz-travel: 340 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 40 - 2000 U/minfeeds: 5 - 500 mm/minrapid traverse: 1,2 m/mintotal power requirement: 1,9 kWweight of the machine ca.: 0,7 t- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.

Mesa de apoyo giratoria entre 0° y 180°, por lo tanto, mecanizado de 3 lados en una sola sujeción Se pueden preseleccionar 2 velocidades, 6.000 o 12.000 revoluciones por minuto, de modo que se pueden mecanizar tanto perfiles de acero como de aluminio 4 pines de copia controlables neumáticamente Sujeción neumática de material Dispositivo de pulverización de cantidad mínima Ancho del perfil: 30-120 mm Altura del perfil: 50-100 mm Longitud de la barra: 490 - 3.000 mm Peso: aprox. 350 kg

max. wheel diameter: 275 mmmax. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mmspiral angle: min. 0 / max. 60 °max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/minblade head turning speeds: 20 - 110 U/mintotal power requirement: 100 kWweight of the machine ca.: 16,7 tdimensions of the machine ca.: 5,20 x 2,30 x 2,40 mInternal deburring device U axis / Q spindlechip conveyorcoolant deviceElectrostatic air purifier ELBARONno toolsNo workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portaherramientas ISO 40, distancias de recorrido 800 x 300 x 400, 18 velocidades de husillo 40 - 2000, 18 avances 10 - 500, recorrido rápido, motor de husillo 2,2 kW, Juego del husillo eje X 0,3 mm, eje Y 0,2 mm Fuelles en los ejes X y Z nuevo

x-travel: 10000 mmy-travel: 1500 mmz-travel: 3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC control Heidenhain TNC 415B- controlled 2-axes NC-milling head 2,5°- coolant deviceThe machine will be sold without the plate fieldAccessories:ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872some spare parts like bevel gears for the milling head and ball screw for X-axis.Technische Daten / technical details:Verfahrweg X längs / X-travel longitudinal 10000 mmVerfahrweg Y quer / Y-travel cross 1500 mmVerfahrweg Z vertikal / Z-travel vertical 3000 mmWerkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpmVorschub / infeed 6-10000 mm/minEilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/minAntriebsleistung Hauptmotor 100%ED / drive capacity main motor 1 ...

ISEL SM Alpha Omega – Centro de mecanizado CNC de 5 ejes con 2 husillos Se vende una fresadora CNC ISEL SM Alpha Omega de 5 ejes, precisa y versátil, construida en 05/2015, equipada con dos husillos de alta frecuencia. Esta máquina es ideal para aplicaciones en tecnología médica, ingeniería de precisión, micromecanizado y construcción de moldes y prototipos. Características técnicas: Modelo: ISEL SM Alpha Omega Año de fabricación: 05/2015 Nº Ref.: 274507 SSZ6000 Ejes: 5 (X, Y, Z, A, B) Viajar: Eje X: 1800 mm Eje Y: 1700 mm Eje Z: 800 mm Husos: Cantidad: 2 husillos de alta frecuencia Velocidad: hasta 60.000 rpm Potencia: hasta 6 kW Portaherramientas: HSK25 / HSK32 Dimensiones (ancho x fondo x alto): aprox. 2800 x 2550 x 2950 mm Peso: aprox. 1400 kg Construcción sándwich de acero / granito sólido para alta rigidez y amortiguación de v ...

Recorrido X: 1000 mmRecorrido Y: 600 MMZ-Recorrido: MMrequisito de potencia total: 2,5 kWPeso de la máquina aprox.: TDimensiones de la máquina aprox.: mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Recorrido X: 600 mmRecorrido Y: 400 MMZ-Recorrido: 500 mmPotencia total requerida: 6 kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 320 mmy-travel: 240 mmz-travel: 300 mmtotal power requirement: 3 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital Recorridos X/Y/Z: 400 x 200 x 400 mm Tamaño de la mesa 700 x 330 mm Portaherramientas ISO 40 Tornillo de banco, hidráulico Renovado en 2019

x-travel: 290 mmy-travel: 170 mmz-travel: 310 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 50 - 2600 U/minfeeds: 9 - 450 mm/minquill stroke: 70 mmtotal power requirement: 5,5 kWweight of the machine ca.: 720 kg- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2800 mmgear width: - mmmax. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kWweight of the machine ca.: 50 tThe machine has only a few working hours and is like new.With internal milling head.Note: If you require an external milling head, we can offer it separately. - The price of the new machine of this caliber is 2.3 million Euro.- With minimal operating hours, the machine is essentially new.- It is one of Gleasons largest machines- It has the possibility of dry or wet milling, and internal and external gearing.- The machine underwent a comprehensive manufacturers inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our produ ...

x-travel: 1700 mmy-travel: 1200 mmz-travel: 1600 mmtable surface area: 1700x1200 mmturning speeds: 35-1800 U/minfeed: 20-1550 m/minSpindle: 300 mmthroat: 1200 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.