máquinas de bebidas usadas para la venta (2,155)

2-vessel stainless steel brewhouse (beraplan, 1997), mounted on a stainless steel frame with a work platform. The brewhouse comprises the following components: - Mash/wort kettle, steam heated, with propeller agitator, mashing nozzle, CIP head and 4 hop dosing hoppers. - Lauter tun with slotted false bottom, rake, spray heads and spent grain pump - Whirlpool as a separate stainless steel vessel (gross volume: 48 hl, manufactured by C. Gresser, 1978) - Two-stage plate heat exchanger (GEA Ecoflex) used as a wort cooler with wort aeration - Spindle station - Control console (Siemens) with buttons and screen for visualising the brewing process. - Control cabinet with S5 module and various other control and regulation elements. - Various other pipework, pumps, valves, measurement and control technology, Additional title: Stainless steel brewhouse with a wort discharge capacity of 35 hl, built ...

Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system, Additional title: cold degassing via CO2-Stripping, Capacity: 20000 l/h, Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar, Gross volume buffer tank: 7060 l ; overpressure up to 4 bar, Residual oxygen content appr.: 0,010 - 0,015 mg/l, Operation / Control: Simatic S5, Material: stai ...

Depósito vertical de sedimentación hecho de acero inoxidable. Capacidad: 80 hl, título adicional: Depósito vertical de acero inoxidable, Contenido: 8000 l, Ancho: 2100 mm, Altura: 6000 mm, Material: Acero inoxidable, Posición: independiente, Construcción de base: Tanque cilíndrico con bases difusadas, sobre tubos cuadrados, Características: Tapa de alcantarilla en el bastidor, salida central inferior

Capacidad de llenado del llenador de botellas de línea: 7500 l/h, Características: Bomba dosificadora como bomba de émbolo (Bran & Lübbe, yp DMS-G, 30 (diámetro) x 60 mm de carrera, 326 l/h 0,5 atü), 4 entradas (NW 25, NW 50, NW 15 y NW 32)

Una fábrica de cerveza de tres recipientes con tapas de cobre en el tun de mosto y la tetera de mosto, y el tun. Operado mediante el método de decocción. Título adicional: Recipientes de elaboración con campanas de cobre y dispensador de lúpulo, enfriamiento de hidromasaje y mosto, Capacidad: 15000 l/cerveza, Operación / Control: ProLeit / Siemens S7, Materiales: recipientes de la fábrica de cerveza cubiertos de cobre, Características: tetera de mosto/mosto, tuner de maceración/laure, adición de lúpulo, sistema de condensador de vapor, jacuzzi, enfriador de mosto, diversas bombas y accesorios

Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower  ...

Título adicional: planta de mezcla de dos componentes con desaeración y carbonización, Capacidad: 9600 l/h, Contenido máximo de CO2 (valor operativo): 8 a 8,5 g/l, Contenido residual de oxígeno (valor operativo): 1 a 1,5 mg/l, Precisión de la medición de Brix y CO2 respectivamente: ± 0,05 Brix; ± 0,05% de alcohol vol, características: medición Brix y medición de CO2 (empresa ACM);

Depósito aislante de maduración crema hecho de acero inoxidable. Con agitador y superficies de calefacción/refrigeración Capacidad: 125 hl, Título adicional: Depósito de acero inoxidable calefactable con agitador, Contenido: 12500 l, Ancho: 3,1 m, Altura: 4,2 m, Material: acero inoxidable, Posición: autoportante, Construcción base: Tanque cilíndrico con pies tubulares, Características: Aislamiento con paneles de acero inoxidable soldados, Tapa de alcantarilla y agitador de anclaje en la parte superior, muestreador

Depósito horizontal, calefactable y aislado de acero inoxidable con manómetro, válvula de seguridad, indicador de nivel, línea de limpieza y válvulas. Título adicional: horizontal, aislado, para azúcar líquido, Volumen: 20800 l, Presión de funcionamiento: 1 bar, Temperatura de funcionamiento: 20 °C, Material: acero inoxidable, Posición: horizontal, Características: manómetro de aislamiento, válvula de seguridad, indicador de nivel de llenado, tuberías de limpieza, válvulas

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...

Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle 

This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...

Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...

Reusable glass bottle filling line for mineral water and soft drinks, consisting of the following components: - Depalletising with pallet feeding (Schaefer, approx. 1989) - Unpacker (KHS with conversion by Paxona) - Crate washer for crate spraying - Unscrewing machine (Adelski) - Bottle cleaning machine (Krones, 2001) Single-end machine - Empty bottle inspector (Krones) with ejection and glass shredder - Glass bottle short tube filler (Krones, 2002) with cappers for crown caps and screw caps + cap inspection - Labelling machine (Krones, 2009) for cold glue labelling of paper labels + label inspection - Packer (KHS with conversion by Paxona) - Depalletising (Schaefer, approx. 1989) - Free transport for bottles and crates - CIP system with 3 containers - Premix system Translated with DeepL (free version), Additional title: Reusable line; years of manufacture approx. 1989-2012, Capacity: 11 ...

2 tanques de presión horizontales de acero inoxidable, cada uno equipado con tubo de salida, manómetro y lentes de mirilla. Los depósitos vienen con un marco de silla para su instalación. Título adicional: tanques horizontales de acero inoxidable montados sobre andamios, Volumen: 1050 l, Sobrepresión: 3 bar, Longitud: 2200 mm, Ancho: 800 mm, Altura: 800 mm, Material: acero inoxidable, Posición: horizontal, Construcción de base: con andamios para instalar los tanques uno encima del otro, Características: tubería de salida DN65, manómetro, Gafas de visión

2 tanques de presión horizontales de acero inoxidable, cada uno equipado con bobina de refrigeración y lentes de mirado. Los tanques vienen con un bastidor para su instalación. Título adicional: depósitos de presión horizontales y refrigerables de acero inoxidable, Recipiente de volumen: 1200 l, Bobina de refrigeración de volumen: 4 l, Sobrepresión máxima: 3 bar, Temperatura de trabajo máxima: 30 °C, Longitud: 2700 mm, Ancho: 900 mm, Altura: 900 mm, Material: acero inoxidable 1.4301 (AISI 304), Posición: horizontal, Construcción de la base: cada uno sobre el marco de la silla, Características: bobina de refrigeración, gafas de visión

Tanques de presión horizontales de acero inoxidable con camisas de refrigeración, visores, tuberías de salida y manómetros. Título adicional: depósitos de presión horizontales y refrigerables de acero inoxidable, Volumen: 1050 l, Sobrepresión máxima: 3 bar, Longitud: 2300 mm, Ancho: 860 mm, Altura: 860 mm, Material: acero inoxidable, Posición: horizontal, Características: camisa de refrigeración, tubería de salida DN50, vidrieras, manómetro

2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed wh ...

- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...

These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...

Sistema completo de inspección de cajas para cajas PETCYCLE, con botellas de 20x0,5 l, 9x1,0 l, 6x1,0 l y 6x1,5 l. Título adicional: Sistema completo de inspección de cajas, Capacidad: 4000 cajas/h, Formatos: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l y 6 x 1,5 l-PET, Material: Carcasa de acero inoxidable, Posición: independiente, Construcción de base: Caja con pies tubulares, Características: Cinta transportadora, 1 carcasa con electrónica de medición, 1 carcasa con electrónica/tacto del operador

Keg cleaning, filling and palletising system, consisting of the following components: - Keg external washer Schöttinger & Schäfer, year of manufacture 1987 Model: AW 2RB - Keg filling system Leifeld & Lemke, Year of manufacture: 1988 Consisting of: 1 line for pre-cleaning, KVR 1, Capacity: 140 kegs/hour 2 lines for main cleaning and filling, KRF1 and KRF 2 Capacity: 120 kegs/hour - CIP system with 5 containers Year of manufacture: 1988 - Palletising and depalletising RST Year of manufacture: 1999 with pallet magazine and palletising robot (KUKA KR 125/1), Additional title: Keg cleaning and filling system with palletising; built 1987 - 1999, Capacity appr.: 120 Kegs/h, Operation / Control: Simatic S7-300, Features: External washer; pre-cleaning, main cleaning and filling lines; CIP system; palletising with pallet magazine and robot

Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrig ...

tanque CIP de acero inoxidable aislado y vertical con 6 contenedores dispuestos uno encima del otro. La capacidad total es de 500 hl., título adicional: depósito vertical de acero inoxidable, Contenido 2 zonas cada una: 10000 l, Contenido 1 zona: 14000 l, Ancho: 3000 mm, Altura: 12087 mm, Material: acero inoxidable, Posición: independiente, Construcción de base: 6 tanques cilíndricos dispuestos uno encima del otro con fondos cónicos, Características: escaleras y plataformas con barandillas, alcantarilla en las cubiertas, aislamiento de la carcasa con revestimiento de acero inoxidable soldado, recogiendo el desbordamiento,

Rotary machine for capping swing-top bottles, Capacity: 18000 bottles/h closing heads: 24 pieces, Power: approx. 5 kW, Water: approx. 200 l/h, Compressed air: approx. 2 cbm/h, Length: 3,3 m, Width: 2,2 m, Height: 2,4 m, Weight: 3000 kg, Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm, Running direction: right - left, Material: Stainless steel, wear-resistant plastic, Base construction: miniaturized, hygienic machine table in outward beveled design, Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station, without control cabinet

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

1 Combi-Filter Seitz, type Orion 100 Year of construction: 1982 Output: 100 hl/h complete with beer pump, conductivity measurement, dosing vessel, Control cabinet, switching panel, KG collecting pan with conveyor and disposal pump., Additional title: Kieselguhr and sheet filter, Filtration capacity: 10000 l/h, Filterarea kieselguhr appr.: 35 m², Length: 5200 mm, Width: 1320 mm, Height: 2250 mm, Formats: 1 m x 1 m filter plates, Material: Stainless steel, Position: Horizontal, Base construction: Frame filter, Features: Hydraulic filter compression; altguhr conveyer: up to 200 Filter sheets or 55 kieselguhr plates and 56 filter sheets

Dos tanques verticales de presión de acero inoxidable con aislamiento y revestimiento de chapa metálica. Título adicional: Depósitos verticales y aislados de presión de acero inoxidable, Volumen: 18000 l, Presión permitida: 4 bar, Temperatura permitida: 25 °C, Presión de prueba: 4 bar, Peso: 2220 kg, Material: acero inoxidable, Construcción base: con depósito vertical con fondos y pies de tubería afundidos, aislamiento y revestimiento metálico, Características: alcantarilla de concha, tobera para muestreo