máquinas de soldar usadas para la venta (1,716)

Table dimensions: 1000 x 1000 mmtable load: 2500 Kgswivelling range: 105 Gradturning speeds: 0,15 - 2,0 U/minheight adjustment: 1010 - 1836 mmhollow spindle diameter: mmwelding current: 700 Amperemax. torque on the faceplate: 5000 Nmtotal power requirement: 6,0 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this ad ...

number: 53 Positionenweight: 45 kgcondition: neu 0Basic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 900 mmtable load: 2000 Kgweight of the machine ca.: 0,24 tdimensions: 1,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 10000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,5 + 3,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/min: 900 Nmtotal power requirement: 0,37 / 0,37 kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 800 mmtable load: 1500 Kgswivelling range: 0 - 105 Gradturning speeds: 0,15 - 1 U/minheight adjustment: 672 - 1180 mmhollow spindle diameter: mmwelding current: 500 Amperemax. torque on the faceplate: 3000 Nmtotal power requirement: 0,75 kWdimensions of the machine ca.: 1560x1120x750 mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The dat ...

table length: 2900 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,9 tdimensions: 2,9 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 6 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 12000 Nm0: 1,5 / 2,2 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 2,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1300 - 2050 mmmax. torque on the faceplate: 10000 Nmengine output: 1,5 / 1,5 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corriente de soldadura: 30 - 200 A frecuenciade carga conectada: 230 Vpeso: 3,6 kgDimensiones (LxWxH): 290 x 135 x 2600 mmVolumen de suministro:Máquina de soldadura TIG Buddy TIG 160Electrodo y cable de tierra 3mAntorcha TIG ET 17 4mManguera de gas con tuerca de unión

corriente de soldadura: 15 - 40 Acapacidad de corte: 1 - 16 mmvoltaje de circuito abierto: 96 VPresión de aire requerida: mín. 4 barcarga conectada: 3,6 kWfrecuencia de carga conectada: 230 Vpeso: 9,0 kgDimensiones (LxWxH): 371 x 153 x 232 mmMáquina de exposición Cortadora de plasma inverter con accesorios:Antorcha de corte con cable de 4 m, pinza de puesta a tierra con cable de 2,5 m, manómetro de aire, mascarilla y cepillo.

número: 24 Peso dela posición: 22 kgcondición: neu 0Juego básico 1 / 24 piezaspara tablero de mesa espesor 15 y 25 mm4 abrazaderas, altura de sujeción 300 mm, proyecciónvariable 8 pernos de sujeción 2 piezas tope 100mm4 piezas. tope 150 mm2 piezas tope 225 mm1 pieza soportede antorcha 1 pieza cepillo perforado 30 mm1 pieza loción separadora 500ml1 ud. Limpiador de mesas de soldadura de base natural y biológica 500ml

peso máx.: 1000 Kgdiámetro de la pieza de trabajo: 20 - 800 mmdiámetro del tambor: 200 x 50 mmalimentación: 80 - 1600 mm/minpotencia total requerida: 0,23 kWdimensiones de la máquina aprox.: 2 Stk. 0,45x,039x0,33 m

clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Un dispositivo de soldadura ultrasónica Branson está disponible. Frecuencia: 20 kHz, potencia: 900 W, carrera: 100 mm, fuerza de sujeción a 690 kPa: 1,96 kN, liberación dinámica: 67N-734N. Documentación disponible. Es posible la inspección in situ.

Está disponible una célula de soldadura Akon que incluye el robot Kuka y 2 fuentes de soldadura Dinse. 1) Robot de soldadura: Kuka KR 6 R900, carga útil: 6 kg, alcance: 900 mm, control: KR C4 Compact, carga de la brida: 25 kg, peso total: aprox. 170 kg. 2) Célula de soldadura automática Akon Robotics con plataforma giratoria y sistema de control Kuka. 3) Fuente de alimentación de soldadura Dinse Dix PI 900. El motor EP para el 4º eje se sustituyó en 2023. Documentación disponible. Es posible la inspección in situ.

Está disponible una máquina de corte por láser de CO2 CNC Amada con sistema de almacenamiento automatizado LKI. 1) Potencia del láser: 4kW (4000W), recorrido X/Y/Z: 3100 mm/1550 mm/100 mm, carga máxima de la mesa: 920 kg, espesor máximo del material acero/acero inoxidable/aluminio: 20 mm/12 mm/10 mm, dimensiones del sistema láser X/Y/Z: aprox. 10000 mm/4300 mm/2100 mm, peso: aprox. 11000 kg. 2) Palets: 8, palets de corte: 2, materia prima: 2/3, descarga: 4/3, altura máxima de descarga: 2200 mm, dimensiones máximas del material X/Y: 3050 mm / 1525 mm, dimensiones mínimas de la hoja: 2000 mm / 1000 mm, altura: 5400 mm. Documentación disponible. Es posible la inspección in situ.

Recorrido X/Y/Z: 2520 mm/1550 mm/300 mm, dimensiones máximas de la hoja X/Y: 5040 mm/1550 mm, espesor máximo del material acero dulce/acero inoxidable/aluminio: 12 mm/6 mm/3 mm, peso máximo de la pieza de trabajo: 330 kg, velocidad de posicionamiento: 80 m/min/80 m/min/60 mm/min, precisión de posicionamiento: +/- 0,01 mm. Dimensiones de la máquina X/Y/Z: aprox. 5650 mm/3650 mm/2100 mm, peso: aprox. 6600 kg, horas de funcionamiento: 29499h. Incluido el modelo láser Fanuc C1500. Documentación disponible. Es posible la inspección in situ.

Carga: 335 mm: 3000 kg, 450 mm: 2400 kg, 660 mm: 1900 kg, 825 mm: 1600 kg, 1110 mm: 1200 kg, diámetro máximo de giro a 90: 1600 mm, velocidad: 1,2 rpm, tiempo de inclinación a 135: 30 s, caja de cambios: Boehringer Sturm, tipo de caja de cambios: caja de cambios de aceite 2DA 11. Es posible la inspección in situ.

Tipo de láser: CO2, potencia del láser: 2,2 kW, rango de trabajo X/Y/Z: 1500 mm/3000 mm/100 mm, espesor máximo del material: aluminio: 8 mm, acero dulce: 10 mm, acero inoxidable: 6 mm, peso máximo de la pieza de trabajo: 890 kg. Velocidad de posicionamiento X/Y: 100 m/min, velocidad de posicionamiento simultáneo: 140 m/min, consumo total de energía: 37 kW, peso máximo de la hoja: 70 kg/m². Dimensiones X/Y/Z: 6000 mm / 6400 mm / 2150 mm, peso: aprox. 13500 kg.

Capacidad de carga: 25t, distancia del centro de gravedad: 700 mm, excentricidad: 250 mm, velocidad: 0,66 rpm, rango de inclinación: 0-130, tiempo de inclinación: 120s, altura de la mesa (plana): 1930 mm, altura del eje de rotación: 1600 mm, diámetro de la mesa: 2500 mm, potencia del motor inclinación/rotación: 7,5 kW/4,5 kW, longitud total: 3000 mm, ancho total: 2500 mm. Documentación disponible. Es posible la inspección in situ.