máquinas rectificadoras usadas para la venta (2,167)

Altura central: 175 mm, longitud de rectificado: 650 mm, eje B: -15/195, velocidad de la pieza de trabajo: 1750 rpm, muelas abrasivas T1/T2: 500 mm/400 mm, diámetro: 203 mm, peso máximo de la pieza de trabajo: 80 kg, cabezal de trabajo: MK4, contrapunto: MK3. Dimensiones de la máquina X/Y/Z: aprox. 3000 mm/3000 mm/2100 mm, peso: aprox. 4000 kg, horas de funcionamiento: 56300h, control: GE Fanuc Series 16i-T. Documentación disponible. Es posible la inspección in situ. Se espera que esté disponible a partir de febrero/marzo de 2025.

Longitud de lijado: 650 mm, diámetro máximo de lijado: 508 mm, altura central: 125 mm, velocidad del cabezal de trabajo: 1500 rpm, peso máximo de la pieza de trabajo: 30 kg, rango de giro de la pieza de trabajo: 30-90, contrapunto: MK3. Diámetro de la muela: 508 mm, ancho de la muela: 40 mm, diámetro: 203 mm, diámetro máximo de la molienda interna: 150 mm. Dimensiones de la máquina X/Y/Z: aprox. 4300 mm/3100 mm/2200 mm, peso: aprox. 4000 kg, control: Siemens Sinumerik 820G. Documentación disponible. Es posible la inspección in situ. Se espera que esté disponible a partir de febrero/marzo de 2025.

Ancho de lijado: 200 mm, longitud de lijado: 600 mm, trayectoria de ajuste X/Y: 690 mm/230 mm, distancia entre ejes del husillo de la mesa de sujeción: 500 mm, diámetro de la rueda de lijado: 200 mm, ancho de la rueda de lijado: 20 mm, diámetro: 51 mm, dimensiones de la mesa X/Y: 200 mm/600 mm, carga máxima de la mesa: 110 kp, dimensiones de la máquina X/Y/Z: aprox. 3000 mm/1600 mm/2100 mm, peso: aprox. 1300 kg. Documentación disponible. Es posible la inspección in situ.

Altura del centro: 135 mm, longitud máxima de lijado (eje): 500 mm, diámetro máximo de lijado: 270 mm, diámetro de la rueda de lijado: 400 mm, requisito de potencia: 7,5 kW, dimensiones de la máquina X/Y/Z: aprox. 2000 mm/1300 mm/1300 mm, peso: aprox. 1700 kg.

Está disponible una rectificadora de superficies de precisión convencional con control NC. Resolución: 0,001 mm, recorrido X/Y/Z: 1200 mm/550 mm/400 mm, dimensiones de la mesa X/Y: 1600 mm/450 mm, alimentación de la mesa: 30 m/min, carga máxima de la mesa: 750 kg, distancia entre el husillo y la mesa: 800 mm, alimentación Y: 180 mm/min, precisión Y: 0,001 mm, alimentación Z: 1200 mm/min, precisión Z: 0,3 mm, velocidad: 2800 rpm, dimensiones de la muela X/Y/Z: 400 mm/100 mm/127 mm. Dimensiones de la máquina X/Y/Z: aprox. 6500 mm/3000 mm/2500 mm, peso: aprox. 6700 kg. Documentación disponible. Es posible la inspección in situ.

Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm.

turning speed range - grinding spindle: 4500 U/minmax diameter of the vice bore: 17,5 mmmax. radius to grind: max. 10 mmmax. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Gradweight of the machine ca.: 125 kgOperating instructions availableincluding collet set, grinding wheel flange wrench and the following special accessories:- Aluminium oxide grinding wheel- 3 diamond grinding wheels, different versions- 1 additional grinding wheel holder with diamond grinding wheel- Dressing diamond- Grinding dust coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 20... 400 mmgrinding depth: 315 mminternal grinding spindle rev.-stepless: 2640...16500 U/minwork piece spindle speed: 40400 U/mintable speeds: 0,18 m/minrapid traverse: 10 m/mintable travel: 630 mmtotal power requirement: 16 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mgrinding diameter: innen / internal 20..400 mm / external 500 mmmax. diameter of work piece: 500 mmmax. grinding length: 315 mmcone grinding: 60 °power drive of internal grinding motor: 7,5 kWrev’s of internal grinding spindle: 2640...16500 U/minpower drive of face grinding attachment: 4 kWpower drive of workpiece motor: 1,5 kWrev’s of work piece spindle: 40...400 U/minsteplessly variable table traverse speeds: 0,1...8 m / minrapid movement of table: 10 m / minstroke table 630 mmmax. distance between work piece spindle flange and grinding spindle: 1250 mmThe data for this ad w ...

Diámetro máx. de molienda: / mmLongitud de rectificado: / mmLongitud de la pieza de trabajo: / mmPotencia total requerida: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de molienda: aprox. 250 mmlongitud de molienda: 200 mmaltura central: 85 mmpotencia total requerida: kWpeso de la máquina aprox.: 2,5 tdimensiones de la máquina aprox.: mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

spindle bore: 40 mmTools speed: 30...500 U/minoscillation frequency: 5001400 DH/min: 60 kpaccuracy +/-: 0,001 mmtotal power requirement: 6,4 kWweight of the machine ca.: tdimensions of the machine ca.: m- max. diam of work: 350 mm- max. diam for centerless work: 70 … 150 mm- max. worksize: d = 155 mm- work.length: max. 1000 mm- work.length,centerless: 300 mm- hole in spindle: 40 mm- speed of spindle: 30 … 500/ U/min // rpm- oscíllation frequency: 500 .. 1400 DH/min // DS per min- pressure: 60 kp- precision: 0,001 mm- load: 6,4 kW, 380/400~- Spezifikation: Stock finishing tools incl.- high precision surface micro finishing of pistonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 - 1250 mmgrinding wheel diameter: 250 mmtotal power requirement: 3,5 kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 850 x 1000 x 1800 mmCircular saw blade sharpening machine for sharpening medium to coarse metal saw bladesSaw blade diameter Cold circular saws : 250 - 1250 mmHot circular saws : 900 - 1700 mmTooth pitch up to : 42 mmGrinding wheel double height : 25, 37, 50, 75 and 100Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mmPre-cutting tooth can be chamfered on both sides : up to 45 degreesCutting edge geometry for hot circular saws : = -4 degreesWeight of the machine : 1000 kgexternal dimensions : 850 x 1000 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Sinumerik voltaje: 400 Vpeso de la máquina aprox.: 2,5 tdimensiones de la máquina aprox.: 3500 x 3000 x 2500 mmLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 450/510 mmgrinding spindle - swivable: 10 °grinding spindle slide: 450 mmhorizontal movement: 320 mmswivability (for helical bores): 1 °surface area: 900 x 300 mmstroke: 50 mmclamping slots: 1 cross travel: 320 mmlongitudinal feed: 600 mmtable load: max 320 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: MK 3 total power requirement: 4 kWweight of the machine ca.: 0,620 tCenter bore grinding machine- 160 x 1000 LO- small/ large drilling/grinding length: 50/ 1000 mm- Spindle holder: MK 3- small/ large workpiece diameter: 6/ 160 mm- Grinding head in spindle hole: 125 mm- Oscillation size: 0 to 5 mm- Oscillation double strokes: 125 / min- Speeds: 55/ 110 rpm- Connected load: 4 kW- Weight: 620 kgspecification: motor. Material rotation oscillation Switch cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud de molienda: 600 mmanchura de molienda: 320 mmaltura de la pieza de trabajo: 525 mmsuperficie: 600 x 300 mmplaca magnética: 600 x 300 mmpeso de la máquina aprox.: 2 tdimensiones de la máquina aprox.: 2600 x 1500 x 2000 mrequisito de potencia total: kWLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Características técnicas: - Dimensiones de la banda de lijado aprox. 2000 x 150 mm - Abertura de rectificado de la superficie aprox. 560 x 150 mm - Velocidad de la cinta de lijado aprox. 30 m/seg. - Arandela de contacto B 150 / D 200 mm - Polea motriz B 150 / D 200 mm - Accionamiento 400 V / 3 kW - Altura de trabajo ajustable -Mot. Extracción de polvo - Necesidad de espacio aprox. 750 x 1050 x 1500 mm - Peso aprox. 120 kg

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 70 kgdimensions of the machine ca.: 610 x 944 x 1419 mmMobile belt sander PASOVEC 75 RUNNERPasovec 75 RUNNER - the special belt grinder developed forSurface grinding applications, especially for grinding weld seams in thematerial surface. Pasovec 75 Runner removes unwanted layers that occur whenSheet metal rolling or after sheet metal cutting with plasma oroxygen arise.Innovative, multifunctional machineStepless adjustment of the grinding depthEquipped with a dead mans switchStation for flat grinding small workpiecesLow running costsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 2 - 40 mmgrinding depth: 70 mmswing diameter: 285 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mMachine in good working condition, with new e-motor for the working spindle drive.Machine video:https://youtu.be/N95AzX9D_QYMax. Distance chuck flange - wheelhead 390 mmAccessories:Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kWGrinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kWMagazineMachine documentation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 330 mmgear width: - mmmax. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVAweight of the machine ca.: 11,7 tdimensions of the machine ca.: mWe offer a Pfauter model G 320 gear grinding machine for salenumerical control on 8 axes for the machining of gears with straightand helical toothing, with rolled profile for enveloping cuts, the oneWorm profile disc used.Technical specifications:CNC control Siemens 840 CControlled axes:X Radial axisY Tangential ShiftZ Vertical axisA Workhead rotationB Worm rotation during processingC Table rotationU Radial axis dresserV Tangential axis dresserModule 0.5 – 7.0Minimum workpiece diameter 10 mmMaximum workpiece diameter 330 mmNumber of teeth 10 - 600Vertical carriage thrust Z 200 mmHorizontal grinding wheel - carriage stroke X 230 mmTangential slide stroke Y 135 mmAngle of rotation of clamping hea ...

grinding length: 4200 mmgrinding width: 1300 mmworkpiece height: 550 mmControl: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mmsegment head diameter: 1400 mmgrinding motor turning speeds up to: 320 U/min.grinding motor: 306 kWweight of the machine ca.: 50,0 tdimensions of the machine ca.: mSegment dimensions: 120/106 x 41 x 250 mmNumber of segments: 1 set = 26 piecesGrinding motor feed: 0.5 - 35 m/min, infinitely variableGrinding motor feed:- in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variableEquipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support.- new grinding dimensions can be entered into the control, whereby thethe grinding head automatically adjusts to the corresponding height. Dresser with adjustment ax ...

max. wheel diameter: 330 mmgear width: 180 mmmax. module: 7 min. module: 0,5 total power requirement: 12 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mmgear width: 40,65 mmmax. module: total power requirement: 20 kWweight of the machine ca.: 10 tMax. external Ø of workpiece 215 mmTooth profile, height x width 16 x 40.65 mmNo. of teeth 5 - 200Max. tooth ratio 1 : 10Grinding wheel Ø 51 - 190 mmGrinding wheel speeds 1,000 - 6,000 rpmX Axis (horizontal) 152 mmY Axis (vertical) 178 mmZ Axis (slide base plate) 304 mmDistance from middle of machine to middle of workspindle 115 mmAxial speed 125 mm/secWorkpiece speeds 0 - 30 rpmWorkspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driven gri ...

diámetro máx. de la muela abrasiva: 800 mmanchura máx. de la muela abrasiva: 250 mmmesa de molienda: giratoria: Gradrequisito de potencia total: kW peso de la máquina aprox.: tdimensiones de la máquina aprox.: mAmoladora fina de doble cara, aparador, dispositivo de refrigeración, más antiguo M.

diámetro de molienda máx.: 30 mmancho de la rueda de regulación: 12 mmancho máx. de la muela abrasiva: mmrequisito de potencia total: kW peso de la máquina aprox.: tdimensiones de la máquina aprox.: m

honing diameter: 12 mmstroke: 40 mmthroat: mmtotal power requirement: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: m3 spindle honing machine with in process measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 240 mmcentre distance: 0 mmhoning length max.: 500 mmmax. module: 5 total power requirement: 12 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 120 mmgrinding depth: 200 mmswing diameter: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mGrinding diameter, internal, max., approx. 3 - 120 mmGrinding depth, approx. 200 mmHeight of centres above rotating workpiece slide 132 mmMax. swing Ø in front of rotating workpiece slide, approx. 450 mmWork spindle admission 40 mmTable stroke, max. (Z axis) 480 mmWorkpiece cross adjustment (X axis) 50 mmTurret head cross adjustment (U axis) 50 mmWorkspindle head swivelling (B axis) -30 / +45 ° (manual)Speeds of workspindle, infinitely variable 75 - 1,300 rpmGrinding spindle speeds 9,500 - 150,000 rpmGrinding spindle drive 4 kWTotal electrical load, approx. 8 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual pr ...

max. wheel diameter: 280 mmgear width: 330 mmmax. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mmstroke: 280 mmthroat: 300 mmtotal power requirement: 6 kWweight of the machine ca.: 2,6 tHoning Ø 10 - 100 mmMax. honing depth, approx. 250 mmMax. spindle stroke 260 mmDistance between spindle and column 300 mmMounting height 1,000 mmTable size 350 x 500 mmHeight of table above floor 500 mmSpindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpmStroke speed, infinitely variable, hydraulic 0 - 23 m/minSpindle drive 2 kWTotal electrical load 6 kW - 380 V - 50 HzWeight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be inspected under ...