máquinas rectificadoras usadas para la venta (2,495)

Proceso: rectificado por inmersión sin centros, diámetro máximo de la pieza: 20 mm, longitud máxima de la pieza: 80 mm, sin automatización mediante recipiente vibratorio. Es posible realizar una inspección in situ.

grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmmax. workpiece weight between centres: 250 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine mit sehr wenigen Betriebsstunden nach Überholungbeim Karstens Fachbetrieb.Zustellsteuerung JetterDigitalanzeigeInnenschleifvorrichtungReitstock mit ZylindrizitätsfeinverstellungHydraulische ReitstockpinoleEtc...Luftkissenschnellverstellung SchleifspindelstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 1000 mmmin. workpiece diameter-at internal hobbing: 100-500 mmworkpiece length - max.: 500 mmcontrol: Siemens Sinumerik 840 D swing dia.: 1250 mmWorkpiece spindle flange diameter: 520 mmwork piece spindle speed range: 0-440 U/minweight of the machine ca.: 25 tdimensions of the machine ca.: 5100 x 3034 x 4500 mmTable travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mmTable speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axisEquipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentationThe data fo ...

Recorrido X 420 mm YWeg 270 mm Tamaño de la mesa 254 x 482 mm Proyección 254 / 318 mm Velocidades del husillo de rectificado 12 - 60.000 rpm Carrera del husillo 92 mm Velocidades del husillo 90, 136, 184, 280 rpm Velocidad de carrera, ajustable 2 - 120 carreras a 51 mm Precisión 1,25 μm a 30 mm Conexión de aire comprimido 7 bar Peso de la máquina aprox. 1700 kg Dimensiones aprox. 1,45 x 1,2 x 2,4 m

Longitud de rectificado: 500 mmAncho de rectificado: 200 mmAltura de la pieza: 300 mmPotencia total: 3 kWPeso de la máquina aprox.: 1,6 tDimensiones de la máquina aprox.: 2,621,7 mPaquete 5 x JUNG HF 50 EXW cerca de FrankfurtLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt K 80- Hinged protec ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 90.0 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- This automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for the longest service life and the best possible smoothness- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed structurally optimized- thus a burning of the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible suc ...

width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 90.0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...

width of the strips: 150 mmband length: 2000 mmband speed: 29.0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight of the machine ca.: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table-  ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...

width of the strips: 45.0 mmband length: 850 mmband speed: 8.0 m/sek.voltage: 230 Vtotal power requirement: 0.18 kW MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 250 mmgrinding wheel size: 250 x 25 x 20 mmturning speeds: 2850 U/minvoltage: 400 Vtotal power requirement: 2.0 kWweight of the machine ca.: 23.0 kg.dimensions of the machine ca.: 600 x 290 x 300 mmFurnishing:- Heavy design and high quality equipment- ideal for professional use- Ideal for matting, polishing- up to mirror-smooth surfaces of various materials- with the help of optionally available polishing discs and polishing pastes- Lockable ON-OFF switch according to IP54 with undervoltage release- Including motor with copper winding for a long service life- Standard with rubber feet for vibration-free work- Very smooth running thanks to balanced rotor with quality ball bearings- Elegant machine body made from high quality die-cast- Suitable for polishing metal, plastic and non-ferrous materialsScope of delivery:- Soft polishing pad- Hard polishing pad- Operating instruc ...

grinding width: 32.0 mmmax. dia. of grinding wheel: 250 mmgrinding wheel size: 250 x 32 x 32 mmturning speeds: 2850 U/minGrain size: K 36 / K 80 engine output: 1.5 kWvoltage: 400 Vweight: 30.0 kgrange L-W-H: 510 x 320 x 360 mmscope of delivery : - Grinding disc K 36- Finishing wheel K 80- Spark protection on both sides- workpiece supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt  ...

width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 usado: rectificadora cilíndrica interna • Fabricante: OVERBECK, Herborn • Modelo: 250 I-HA • Nº de fábrica: 261991 • Año de construcción: 1971 • Diámetro de sujeción: máx. 140 mm • Longitud del orificio rectificable: máx. aprox. 150 mm • Diámetro del orificio rectificable: máx. aprox. 0,8-80 mm Accesorios: sin husillo de rectificado interno sin motor de accionamiento para husillos de rectificado internos Poleas de desviación para accionamiento de husillo disponibles (La máquina fue instalada por el propietario anterior con un accionado por husillo neumático) Dispositivo de molienda plano, se puede girar a mano Tanque de refrigerante con bomba

Número de máquina: 20932 Voltaje de funcionamiento: 3 x 400 VAC Frecuencia: 50/60 Hz. Corriente nominal: 46A 63A Voltaje de control: 200-240 VAC Potencia: 28 kW Control: Portaherramientas: Cabezal de molienda: Husillo de rectificado: El husillo se puede girar mediante el motor Potencia de accionamiento: 7,5 kW Velocidad: 0 – 9000 rpm Montura de lente: Diámetro del disco: Número máximo de rebanadas: Viajar: X: 380 mm Y: 280 mm Z: 280 mm Alimentar: Ejes X e Y: 20000 mm/min Eje Z: 10000 mm/min Ejes giratorios: Designación: eje C Ángulo de giro: 340 Alimentación: máx. 66/s Eje: Eje A: Rotación sin fin Alimentación: máx. 167/s Incluye refrigeración por aceite y sistema de refrigeración del fabricante ARO Incluye varios accesorios de máquina a juego, como portaherramientas, líneas de refrigerante y otros dispositivos de sujeción

x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ø de la rueda de copa: 180 mm Velocidad de la rueda de copa: 2900 rpm electr. Conexión: 380 V, 2900 rpm, 0,9 kW Dimensiones de la mesa vibratoria: 200 x 350 mm Mesa giratoria basculante La mesa giratoria gira +/- 20° Dimensiones: 750 x 350 x 1270 mm

spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...

Oferta 73066 Características técnicas: - Dimensiones de la banda de lijado aprox. 2000 x 150 mm - Abertura de lijado superficial aprox. 560 x 150 mm - Velocidad de la cinta de lijado aprox. 30 m/seg. - Arandela de contacto B 150 / D 200 mm - Polea motriz B 150 / D 200 mm - Accionamiento 400 V / 3 kW - Altura de trabajo ajustable - Separar la ITV. Extracción de polvo - Requisito de espacio aprox. L 750 x Al 1050 x Pr 1500 mm - Requisito de espacio, párr. aprox. L 750 x Al 1250 x Pr 750 mm - Peso aprox. 180 kg

Área de molienda: 600 x 400 mm Mesa magnética Tanque de refrigerante varias muelas abrasivas

diámetro de la muela: 200 mmancho máximo de la muela: 32 mmdiámetro del orificio de la muela: 51 mmvelocidades de la muela: 2900 U/minpotencia del motor: 0,9 kWDamoladora de muelas montada en soporteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Una antigua rectificadora cilíndrica de precisión Carl Zeiss está disponible. Incluye numerosos accesorios y herramientas. Es posible realizar una inspección in situ.

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x  ...

Está disponible una rectificadora de cuchillas industrial MVM para afilar piezas de carpintería. Longitud de la cuchilla: 6000 mm, control: PLC Siemens con control remoto. Incluye un sistema de extracción, una mesa magnética y un filtro de virutas. Documentación disponible. Es posible realizar una inspección in situ.

Está disponible una rectificadora de corte CNC Anthratec, anteriormente utilizada para cortar rejillas. Velocidad de corte a 2000 rpm: aprox. 42 m/s, rango de velocidad: 500-3500 rpm, carga conectada: 30 kW, control: Siemens S7-1200. Documentación disponible. Es posible realizar una inspección in situ.