mandrinadoras y centros de mecanizado usadas para la venta (3,212)

Capacidad de diámetro en acero (diámetro): 32 mm garganta: 325 mm carrera de diámetro: 170 mmtaper MK: 4 MKtamaño de la mesa: 570 x 480 mm de alimentación: 0,1 - 0,16 - 0,25 mm/Velocidades de giro: 60 - 1600 U/min consumo total de potencia: 2,9 KWpeso de la máquina aprox: 0,65 tDimensiones: 1,2 x 0,8 x 2,15 mMáquina de perforación con pilar: - Alimentación - Velocidad variable del husillo - Bomba de refrigerante - Luz de la máquina Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Cilindrada del diámetro en acero: 32 mm garganta: 300 mm carrera de diámetro: 140 mm, cono MK: 3 MKtamaño de la mesa: 380 x 360 mm de avances: über Velocidades de giro manual: 85 - 1100 U/min Potencia total: 1,3 KWpeso de la máquina aprox.: 0,27 tDimensiones: 0,95 x 0,6 x 1,92 mTaladro de pilar con:- Alimentación por volante - Velocidades del husillo por transmisión por correaLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 32 mm garganta: 325 mm carrera de diámetro: 170 mmtaper MK: 4 MKtamaño de la mesa: 570 x 480 mm de alimentación: 0,1 - 0,16 - 0,25 mm/Velocidades de giro: 60 - 1600 U/min consumo total de potencia: 2,9 KWpeso de la máquina aprox: 0,65 tDimensiones: 1,2 x 0,8 x 2,15 mMáquina de perforación con pilar: - Alimentación - Velocidad variable del husillo - Bomba de refrigerante - Luz de la máquina Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-recorrido: 500 mmy-Recorrido: 400 mmz -recorrido: 330 mm, consumo total de potencia: kWweight de la máquina, aprox. 2100 kg. Dimensiones de la máquina, ca.: m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

spindle diameter: 85 mmx-travel: 400 mmy-travel: 250 mmz-travel: 140 mmw-axis: 450 mmtable surface area: 600 x 380 mmtable load: 300 kgspeeds: 30 - 2500 U/minadjustment speed: 0,02 - 0,08 mm/mintool taper: SK 30 Control: Elesta CNC 211 total power requirement: 9,2 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2750 x 1700 x 2700 mm- CNC Control Elesta 211- with misc. tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmarm length: 1050 mmworkpiece height max.: - mmturning speeds: 15 - 2800 U/minfeed range: 0,075 - 0,45 mm/mindimensions: 2450 x 1300 x 2300 mmWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 €: 952.75 €: 35 mm: MK 4 : 390 mm: 94- 2.225 (16) 50 Hz 113 U/min: M35 : 1660 mm: 1510 mm: 2600 mm: 910 kg: 180 mm: 190 - 650 mm: 1310 mm: 125 mm: 400 x 420 mm: 0,10 - 0,18 - 0,24 (3) mm/min: 750 - 1.500 U/minERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEdrilling and milling machineautomatic feedprecision electromagnetic clutchesgeared drivecross tablefixed base and displaceable headstockcontrol panelcooling equipment with electric motor pumphand wheel for fine tuningclamping device for toolsadjustable stopdrill guardOPTIONAL EQUIPMENT (PRICES ON REQUEST):Digital read out for drilling depthTapping deviceMotorized longitudinal and/or transverse feedDigital read out for table axes and/or drill head height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-recorrido: 400 mmy-Recorrido: 400 mmz-Recorrido: 375 mm, consumo total de potencia: kWweight de la máquina, aprox. 7150 kg. Dimensiones de la máquina, aprox. M. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

X-recorrido: 1270 mmy-Recorrido: 660 mmz -recorrido: 610 mm, consumo total de potencia: kWweight de la máquina, aprox. 8680 kg. Dimensiones de la máquina, ca.: m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmcontrol: Heidenhain TNC 430 spindle speed:: 10000 U/minpower capacity - milling spindle: 13/9 kWfeed: 30 m/minrapid traverse: 30 m/minno. of workpieces in the magazine: 24 Stücktool taper: SK 40 table surface area: 800 x 500 mmtable load: 0,5 tOverall size: 1,9 x 3,3 x 2,6 mmweight of the machine ca.: 4500 kgUsed vertical machining centre in good condition.- external eletronic hand wheel- coolant system- servo tool magazinThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Viaje: 1016 mmY Viaje: 610 mmZ - Viaje: 760 mm Consumo total de potencia: ? kWpeso de la máquina aprox: 7,5 tdimensiones de la máquina aprox: 3 x 2,5 x 3,2 m Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

X-Viaje: 1016 mmY Viaje: 610 mmZ - Viaje: 760 mm Consumo total de potencia: ? kWpeso de la máquina aprox.: 7,5 tDimensiones de la máquina aprox.: 4 x 3 x 3,2 m. Superficie de sujeción de la tabla 1.270 x 590 mm. Carga de la tabla 1.350 kg tasa de alimentación 15.000 mm/min recorrido rápido 20 m/min Portaherramientas ISO 4024 cambio de posición Transportador de chip IKZ Reparación para IR - sonda de medición ( Renishaw )Control SELCA Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

control: OSP P200 M Número de ejes: 4 St.x - recorrido: 1000 mmy - recorrido: 1000 mmz - recorrido: 900 mmb - eje: 0,001 tamaño del palet: 630 x 630 mm Cargador de herramienta con: 200 husillo de fresado: SK50 velocidad de giro del husillo - escalonado: 12000 U/transportador minchip: kWmisc. accesorios: peso de la máquina aprox: 30 tdimensiones de la máquina aprox: 10 x 4 x 3,5 m. Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmTable dimensions: 1300 x 600 mmtable load: 1,0 ttool taper: ISO 40 DIN 69871Aspindle turning speed range: 60 - 12000 U/minrapid traverse: 32 m/minpower capacity: 10 / 17 kWno. of tools in the magazine: 32 Stücktool length - max.: 300 mmTool diameter: 76 / 127 mmweight of tools max.: 8 kgtool changing time: 2,5 sectotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mm Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 350 mmbore stroke: 180 mmthread dia.: M 24 mmspindle turning speed range: 100 - 1450 U/minfeeds: 0,1 - 0,2 mm/Uspindle taper: MT 4 table surface area: 560 x 385 mmDistance spindle/table max.: 780 mmdistance spindle/base plate: 1320 mmvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,46 tdimensions of the machine ca.: 1,2 x 0,7 x 2,4 m• with cooling and thread cutting device, • adjustable bore depth with automatical switch-off,• left-/right rotation of spindle,• adjustable chip protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-recorrido: 500 mmy-recorrido: 450 mmz-recorrido: 400 mm. Control: SIEMENS 840D tabla - giratorio +/-: +110 / -5 -Mesa giratoria en el eje C: 360 piezas de herramienta con cargador: 16 Werkzeugplätzen peso de la máquina aprox: 3,9 dimensiones t: 2,9 x 2,0 x 2,5 m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

X-recorrido: 750 mmy-recorrido: 620 mmz -recorrido: 520 mmControl: Fabricación: HEIDENHAIN TNC620 rango de velocidad de giro del husillo: 12.000 U/mintool magazin:: 32 peso de la máquina aprox: 7,8 tdimensiones de la máquina aprox: 4,4 x 3,2 x 2,97 mHEIDENHAIN TNC-426Preparado para el eje 4º www.marcels-maschinen.ch Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Control: Fabricación: FANUC 21-M x-recorrido: 1020 mmy-recorrido: 510 mmz -recorrido: 575 mm-tamaño de la mesa: 1200 x 500 mm, rango de velocidad de giro del husillo: 60-8000 U/magazin mintool:: 24 peso de la máquina aprox.: 7,5 tHEIDENHAIN TNC-426Preparado para el 4º eje www.marcels-maschinen.ch Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 1000 mmy-travel: 500 mmz-travel: 300 mmControl: CNC C00 spindle turning speed - stepless: 10000 U/minspindle motor: 10 kWdistance table - lower edge spindle: 180 - 480 mmrapid traverse: 50 m/mintable surface area: 1100 x 500 mmtotal power requirement: 9,5 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,5 x 2,4 x 2,5 m- CNC control CNC-C00- ATC 14-tools (BT 30)- Coolant through Spindleless than 5000hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 860 mmy-travel: 560 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain iTNC53024-fold automatic tool changerelectronical handwheelchip conveyorcoolant through spindle deviceTechnische Daten / technical details:X-Weg / X-travel 860 mmY-Weg / Y-travel 560 mmZ-Weg / Z-travel 600 mmSpindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpmEilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/minTischaufspannfläche / table clamping area 1000x560 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kWGewicht ca. / weight 6.500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and descripti ...

x-travel: 1.250 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: MillPlus B-axis (head): -10 - +180 x 0,001 °C-axis (table): 360 x 0,001 °feed X/Y/Z/-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z: 60,00 m/mintool taper: HSK 100 spindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 38,00 KWmax. torque at 40% / 100% load: 288 / 187 Nmtable surface area: Ø 1.100 mmtable load: 1,50 ttoolpiece magazine: chain magazine: 120 Stücktool diameter: 110 mmtool diameter with 2 vacant positions: 230 mmtool length - max.: 500 mmweight of tools max.: 30,00 kgrotary table speeds infinitely variable: 10 - 500 U/mintotal power requirement: 85,00 kWweight of the machine ca.: 25,00 tdimensions of the machine ca.: 9,00 x 6,50 x H3,50m m5-axis turning/milling machining center withMillPlus IT FD control, dual pallet changer,coolant system, coolant ...

x-travel: 1450 mmy-travel: 1100 mmz-travel: 1300 mmcontrol: Siemens 840D PL Main spindle:: power capacity - main spindel: 50 kWmax. Torque: 1.500 Nmturning speed range - main spindle: 20 - 6.000 min/-1spindle diameter: 110 mmtool taper: HSK A 100 Tool-Presetter:: Turmmagazin / Tool Tower: 180 pos.change-time chip to chip: 5,5 secfeed range: 1 - 65000 mm/minrapid traverse ( X / Y / Z ): 65 m/minpallet changer:: size of pallet: 1.000 x 800 mmmax. palett load: 2000 kgmax. workpiece height: 1.700 mmNumber of pallettes: 2 pos.dimension of workpiece: 1400 x 1400 mmtotal power requirement: - kWweight of the machine ca.: 25 tdimensions of the machine ca.: 8100 x 5350 x 4150 m- Siemens 840D Powerline CNC control- 2-position pallet changer- 180-position tool changer (HSK A 100)- Milling head with 180° B-axis (0.001°)- C-axis table (0.001°)- 80 bar coolant system with filter- Spindle cooling-  ...

bore capacity in steel (diameter): 36.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mm: 4 speeds: 120-900 / 240 - 1780 U/mincolumn diameter: 145 mmtable-size: 615 x 460 mmfeed: 0.1 / 0.2 / 0.3 / 0.4 mm/Utotal power requirement: 1.75 / 2.5 kWweight: 440 kgdimensions: 1200 x 800 x 2300 mm well-maintained condition () current new price approx. 18.000 Euro special price on requestEquipment:- robust pillar drill (V-belt)- electromagnetic feed clutch = spindle feed with overload protection and electrical handle cross circuit- mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel- electric stepless speed adjustment- Digital speed display- clockwise rotation of the drill spindle- pole-changing drive motor- Infinitely adjustable drilling depth stop- Work table with 2x T-slots - height-adjustable- Operating instructions in GermanThe data for this ad was crea ...

bore capacity in steel (diameter): 40 mmthroat: 220 mmbore stroke: 120 mmspindle taper MT: 4 spindle turning speed range: 105 - 1257 U/minno. of turning speeds: 8 Stufen table surface area: 400 x 320 mmbase plate: 390 x 650 mmvoltage: 400 V / 50 Hztotal power requirement: 1,1 / 1,8 kWweight of the machine ca.: 0,3 trange L-W-H: 2,1 x 1,0 x 0,7 mmwith quick-action drill chuck 3-16 mm,drill chuck protection, work table can be rotated, swiveled and height-adjusted,coolant device,lighting,right/left spindle rotation,mechanical depth stop,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2134 mmy-travel: 1016 mmz-travel: 762 mmCNC-control: HAAS CNC Table dimensions: 2134 x 914 mmmax. table load: 1814 kgspindle taper: SK 50 spindle turning speed range: 7500 U/minspindle motor: 22,4 kWfeed range: 1270 mm/minrapid traverse: 15,2 m/mintool change unit: 30 Pos.coolant: IKZ voltage: 400 Vtotal power requirement: kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: 4,70 x 2,95 x 2,99 mchip conveyor: - Serial No.:1099476- Year of manufacture 11/2012- Through spindle coolant TSC- 5-Axis pivotable rotary table HAAS TR310 (as new condition)PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmarm length: 1250 mmbore capacity in cast iron: 60 mmspindle diameter: mmquill stroke: 300 mmtool taper: MK 5 speeds: 25 - 1440 U/minfeeds: 0,08 bis 0,58 mm/Ucolumn diameter: mmvertical adjustment of the arm: mmthread cutting attachment: ja Boring motor: 4,0 kwweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,0 x 0,75 x 2,15 mRadial drilling machine- Mounting cube 800 x 600 x 500mm- Coolant system- Good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mmy-travel: 2200 mmz-travel: 800 mmControl: Heidenhain iTNC 530 table surface area: 3000 x 1200 mmtool taper: HSK-A-63 spindle turning speed range: 12000 U/minpower capacity: 18 kWfeed range: 35000 mm/mintotal power requirement: 68,7 kWweight of the machine ca.: tdimensions of the machine ca.: 12,4 x 3,5 x 4,6 mThe FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components.With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing.Heidenhain iTNC 530 CNC path controlNumber of controlled axes (simultaneously): X/Y/Z/C/BTravels:X-axis (longitudinal travel) 2800 mmY-axis (cross travel) 2200 mmZ-axis (vertical travel) 800 mmMachine length: 12,434 mmMachine width: 3,597 mmMachine height: 4,622 mmCoolant equipment (no coolant through spindle)C ...

x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain TNC 620 table surface area: 1150 x 560 mmtool taper: SK 40 spindle turning speed range: 10000 U/minfeed range: mm/minrapid traverse: 24 m/minspindle drive: kWtotal power requirement: 25 kVAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 4,3 x 2,4 x 2,9 mWorking hours (date 10. February 2026):- Control on: 20811 h- Machine on: 13353 h- Programm cycle: 7412 h- Spindle hours : 5184 hEquipment:CNC control Heidenhain TNC 620Electronic handwheel HeidenhainTool measuring systemLinear scales in all axes X/Y/ZPreparation for measuring probe30-station tool changerCoolant equipment with paper band filter systemInternal coolant supply through the spindle 20 barBlown air through the spindleChip conveyorMachine documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 42624-fold automatic tool changerhandwheelchip conveyorcoolant through spindle deviceTechnische Daten / technical details:X-Weg / X-travel 630 mmY-Weg / Y-travel 500 mmZ-Weg / Z-travel 500 mmSpindelaufnahme / spindle taper BT 40 Drehzahlbereich / spindle speed 0-8000 UpM /rpmVorschubbereich / feed range 1-30000 mm/minEilgang / rapid feed 30 m/minTischaufspannfläche / table clamping area 800x500 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung / drive capacity 30 kWGewicht ca. / weight 6.500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the mach ...