mandrinadoras y centros de mecanizado usadas para la venta (3,280)

Controlar Winmax Recorrido X/Y/Z 2135 x 865 x 762 mm Velocidad del husillo 12.000 min-1 Almacén de herramientas para 40 Wkz., SK 40 Volante Ultimotion IKZ 40bar Sondas Renishaw Transportador

Capacidad de perforación en acero (diámetro): 40 mmgarganta: 325 mmCarrera de diámetro: 170 mmsuperficie útil: 730 x 590 mm0: 130 - 1200 U/minalimentación: 0,09 - 0,16 - 0,28 mm/Ucono de la herramienta: MK 4 requisito de potencia total: 1,8 kWpeso de la máquina aprox.: 0,7 tdimensiones: 1,2 x 0,8 x 2,15 mTaladro con:Alimentación2 engranajesRotación izquierda/derechaInterruptor de pieLuz de la máquinaLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Oferta 25170 Características técnicas: - Capacidad de perforación en acero ST 60 40 mm - Capacidad de perforación en acero ST 60 50 mm - Soporte de husillo de perforación MK 4 - Carrera del husillo de perforación 180 mm - Velocidades del husillo de perforación ajustables de forma continua con contraeje - Nivel 1: 60 - 210 rpm - Nivel 2 210 - 765 rpm - Nivel 3 120 - 420 rpm - Nivel 4: 420 - 1530 rpm - Proyección: 330 mm - 3 alimentaciones 0,1 - 0,2 - 0,3 rpm - Mesa con 2 ranuras en T de 720 x 360 mm - Ajustable en altura mediante cremallera con manivela - Mesa de distancias máx. – husillo de perforación aprox. 780 milímetros - Distancia máx. de la placa base mecanizada - husillo de perforación 1250 mm - Dispositivo de refrigeración -Iluminación - Tornillo de banco de máquina - div. 10 piezas HSS - Taladro - Accion ...

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mprecise bench drill:- Large speed range- Programmable thread cutting- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 360 mmbore stroke: 150 mmspindle turning speed range: 120 - 3000 U/minspindle taper: SK 40 : 650 mm: 320 mmvertical adjustment: 500 mmtable surface area: 1000 x 300 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 1,25 x 1.5 x 2,3 mNew Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs.Domestic equipments:• automatic feed in X-axis• 3-axis digital display• motorized Z-axis• Feed in quill• Left-right-run high• tapping attachment• Gear head swiveling• Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 14 /15 mmthroat: 180 mmbore stroke: 70 mmturning speeds: 420 - 2100 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 0,5/1,0 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 185 mmbore stroke: 50 mmspindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min: 178 mm: 480 mmtable surface area: 700 x 180 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 160 tdimensions of the machine ca.: 0,75 x 0,8 x 0,9 mdomestic equipments• Digital depth gauge• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm: 375 U/min.working area: 180 - 2000 mmengine output: 0,7 kWweight: 28 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M30 mm: 58 - 205 U/min.working area: 320 - 1500 mmengine output: 0,85 kWweight: 36 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 metrisch: 250 U/min.0: 6 - 8 barworking area: max. 1100 mmweight: 15 kgdimensions: 700 x 280 x 250 mmPneumatic tapping machineType with an adjustable angle, horizontal tapping possiblePneumatic tapping machines for M3 - M16 threads, angle adjustable.8 pcs. quick-change chuck with slipping clutch.Documentation in English!Optional: clamping table with grooves type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 150 mmbore stroke: 90 mmturning speeds: 340 - 2200 U/min: 243 x 243 mmtotal power requirement: 0,5 kW / Voltweight of the machine ca.: 42 Kgdimensions: 400 x 450 x 900 mmTable drill- Digital speed display- Spindle protection- vice- drill replacement- Quick span feed (1 to 16 mm)- Tilt and rotating rider work table.- deep stop- tool set- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmtotal power requirement: 25 kWweight of the machine ca.: 11,5 tM A H O (Germany)CNC Controlled Bed Type Universal Machining CentreModel MH 1200 S (120012)Year 1991 Partially reconditioned in Year 2007 by MMD Company_____________________________________________________________Ta ble travel: X axis, longitudinal 1,200 mm Y axis, vertical 600 mmSpindle head Z axis, cross 600 mm Rotary Table size 1,000 x 800 mmDistance between spindle and column, max. 900 mmSpindle taper SK 40Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpmMax. weight o ...

x-travel: 800 mmy-travel: 500 mmz-travel: 510 mmtotal power requirement: 60 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M36 throat: 400 mmbore stroke: 230 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 54 - 1032 U/mintransmission ratio: 12 Stufencolumn diameter: 200 mmtable surface area: 550 x 550 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,72 tdimensions of the machine ca.: 0,6 x 1,2 x 2,6 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection ...

bore capacity in steel (diameter): 60 mmbore capacity in cast iron (diameter): 70 mmthreading cutting capacity:: M50 throat: 420 mmbore stroke: 260 mmspindle taper: MK 5 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 64 - 1210 U/mintransmission ratio: 12 Stufencolumn diameter: 220 mmtable surface area: 600 x 600 mmtotal power requirement: 4 kWweight of the machine ca.: 0,82 tdimensions of the machine ca.: 0,7 x 1,2 x 2,7 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection h ...

voltaje: 50 Vfrecuencia: 50 Hzamperio: 3,7 A: 21882 velocidades:: 3

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 120 mmspindle taper MT: 4 MKtable:: 500 x 460 mmcolumn diameter: 115 mmturning speeds: 75- 3200 U/minfeeds: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 350 kgrange L-W-H: 2,2 x 0,8 x 0,7 mmColumn drilling machine with:automatic feedThread cutting function.Digital depth displayCoolant system2 stage motorSpindle protectionSwivel tablePivoting drill headLED lightingPackaging dimensions:730x760x188mmWeight 340kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mmthroat: 180 mmbore stroke: 82 mmturning speeds: 220 - 2840 U/min: 290 x 290 mmtotal power requirement: 0,55/0,75 kW / Voltweight of the machine ca.: 54 Kgdimensions: 820 x 500 x 290 mmCE-tested spindle hood.Keyless chuck (1 to 16 mm)Tilting work table.Depth stop.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 350 mmbore stroke: 180 mmspindle taper MT: 4 MKtable:: 560 x 560 mmcolumn diameter: 140 mmturning speeds: 50 - 1450 U/minfeeds: 0,1 - 0,2 mm/Utotal power requirement: 1,5 kWweight of the machine ca.: 580 kgrange L-W-H: 2,27 x 0,7 x 1,1 mm• machine base for clamping high workpieces• Digital Depth Gauge• Gearbox swivels 180 °• silent running through geärtete, ground oil-cooled gears• Tapping Function• electromagnetic clutch for drill feed• automatic feed• electric drive for table height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Recorrido X/Y/Z: 600 mm/500 mm/400 mm, dimensiones de la mesa X/Y: 900 mm/600 mm, montaje del husillo: SK40, velocidad: 6000 rpm, posiciones de la herramienta: 24, avance: 6 m/min, desplazamiento rápido: 15 m/min, dimensiones de la máquina X/Y/Z: aprox. 4000 mm/4000 mm/2700 mm, peso: aprox. 5000 kg. Es posible la inspección in situ.

Recorrido X/Y/Z: 700 mm/500 mm/600 mm, velocidad: 6300 rpm, potencia: aprox. 10 kW, alimentación X/Y/Z: 4 m/min, recorrido rápido X/Y/Z: 10 m/8 m/10 m/min, dimensiones de la máquina X/Y/Z: aprox. 4500 mm/2300 mm/2500 mm, peso: aprox. 6000 kg, horas de funcionamiento: 65425h. Es posible la inspección in situ.

Oferta 25118 Características técnicas: - Capacidad de roscado aprox. M 3 - M 8 - Rango de trabajo ( radio de giro ) aprox. 1800 milímetros - Cabezal multiposición - Velocidades: 8 - 700 rpm - Montaje de herramienta de cambio rápido tamaño 1 dia.19 - Conexión neumática 6 - 8 bar - Base de mesa H 900 mm - Necesidad de espacio aprox. 1000 x 2000 x 1000 mm - Peso aprox. 100 kg

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mmB-axis: 0 - 161,955 °C-axis: 360 °spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/minspindle power: max. 35 kWmax. torque on the spindle: max. 130 Nmfeeds -stepless-: bis 20.000 mm/minrapid traverse X/Y/Z axis: 80 / 50 / 50 m/minrapid traverse B-axis: 40 U/minC-axis rapid feed: 50 U/minno. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 40 bartotal power requirement: 52 kVAweight of the machine ca.: 6 t= 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter deviceThe data for this ad was created with ModulMWS - the software solution of Log ...

bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 13 mm

Fabricado en Alemania Portabrocas portabrocas: B 16 Velocidad: 480 - 4.000 rpm

Control Ultimax 3-4 2 pantallas a color (texto + gráficos) Recorrido X/Y/Z 1020/510/610 mm Velocidad 8000 1/min Almacén de herramientas para 24 Wkz. SK 40 DCF Software

Fresadora y taladradora de precisión Mikron WF31D Máquina con virutas y cabina de protección contra salpicaduras Equipado con un controlador Heidenhain TNC355 Especificación técnica La WF 31 D es una fresadora y taladradora de precisión para la producción en serie y la formación CNC. Accionado por una caja de cambios escalonada de cambio automático y correas Poly-V. El husillo vertical se puede extender 90 mm; Posibilidad de conversión de mecanizado vertical a horizontal. Los husillos de bolas con accionamientos de CC permiten movimientos de alimentación simultáneos. Las guías están protegidas contra el polvo, las virutas y el refrigerante. Características técnicas Fabricante: Mikron Tipo WF31D Control: Heidenhain TNC 355 Movimiento longitudinal (X): 560 mm Movimiento transversal (Y): 500 mm Movimiento perpendicular (Z): 400 mm. Potencia de acci ...

thread dia.: M16 - M42 metrisch: 50 - 200 U/min.working area: max. 1300 mmengine output: 1,2 kWweight: 105 kgdimensions: 0,85 x 0,85 x 0,3 mmElectric tapping machines for M16 - M42 threads,Angle adjustable.8 pcs. Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.