otras máquinas de alimentos usadas para la venta (1,086)

Palés de plástico cada uno aproximadamente 120x80 cm, 3 piezas, azul

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

Palé plástico Euro H1 gris

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Palets de plástico cada uno aproximadamente 60x40 cm 8 piezas, negro

Separador de nata (Skimmer). Autolimpia. La máquina viene con el cuenco, motor (15 kW), tapa del motor, ciclón, base de base, pies, caja de agua con válvulas de agua, tuberías de entrada y salida con manómetros y herramientas de mantenimiento para mantenimiento. Características adicionales: Excluyendo: - Panel de control., Tipo de máquina: Separador de nata / Skimmer, Capacidad: 12.000 litros por hora, Velocidad del cuenco: 4.450 rpm, Motor: 15 kW - 380 V - 50 Hz - 1.450 rpm - 30 Amp - 3 Ph, Peso: 1,550 kg, Dimensiones: 145 x 110 x 175 cm

Alu-Vacuum Mole VAKONA DBGM con tapa

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Muro divisorio/puerta de acero inoxidable aproximadamente 140x103 cm

Separador líquido y sólido no vibratorio (tamiz de suero) que se usaba anteriormente para separar los grumos de cuajada del suero. Acero inoxidable y diseño cerrado Capacidades posibles de hasta 50.000 litros/h dependiendo del producto. Motor: 2,2 kW - 400 V - 8,2 A - 1,420 rpm - 50 Hz - 3 Ph., Tipo de máquina: tamiz de suero, Capacidad: hasta 50,000 ltr/h según el producto, Motor: 2,2 kW - 400 V - 8,2 A - 1,420 rpm - 50 Hz - 3 Ph, Dimensiones totales: 160 x 70 x 75 cm, Peso: 270 kg

Mesa de rascar aprox. 120x140 cm

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Máquina de sellado de mesa 99 mm, sin placa de identificación, altura máxima de 200 mm, 230 V, modelo de mesa, adquirida antes del año 2000 por 1.636,13 EUR netos

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

Máquina de pulido y pulido con rectificado húmedo DICK, placa identificativa disponible, disco ø 150 mm, total de 3 ejes, 380 V, modelo de mesa

Cuchillo de desmontaje aprox. 6 piezas, 2 afiladores DICK Rapid Steel

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...

Mesa de desmontaje de aluminio aprox. 200x80 cm, salpicadero, base, sin tabla de cortar, sin contenido

Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool.  , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm

Dispositivo de sellado tipo de envase BS VA3 230 V año 2020, modelo de mesa, adquirido en 2020 por EUR 1.786,45 netos

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Butter milk pump: 3 kW. Feed pump: 3 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h s ...

Cota de malla, 2 delantales

Separador de nata (Skimmer). Autolimpia. La máquina viene con la taza, motor (37 kW), tapa del motor, base y pies, depósito de lodos, panel de control (Westfalia original), válvulas de agua, todas las tuberías de entrada/salida con manómetro/indicador de caudal y herramientas de mantenimiento para mantenimiento. Tipo de máquina: Separador de nata / deskimador, Capacidad: 20.000 litros por hora, Velocidad del cuenco: 4.700 rpm, Potencia del motor: 37 kW - 380 V - 72 A - 1.475 rpm - 50 Hz - 3 Ph, Peso: 2.200 kg, Dimensiones: 190 x 130 x 225 cm

Atomizador de disco tipo rueda con motor accionado por correa de alta velocidad. Potencia del motor: 22 kW - 30 CV. Puede usarse para un secador en spray con una potencia de hasta 1,000 kg/h de polvo. Diámetro de la rueda: 210 mm. Llanta de acero inoxidable AISI316L. Ejecución sanitaria. Peso 400 kg., Tipo de máquina: Atomizador, Capacidad: Usada para secador de pulverización con una potencia de hasta 1.000 kg/h de polvo, Diámetro de la rueda: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensiones: 120 x 120 x 235 cm, Peso: 400 kg

Separador para eliminar bacterias (Bactofuge). Autolimpia. La máquina viene con la tabla, motor (22 kW), ciclón de lodos, placa base, pies, válvula CPM para la regulación de presión, panel de control (Alfa Laval original) y caja de agua (Alfa Laval original). Características adicionales: Excluyendo: - Herramientas de mantenimiento para mantenimiento, Capacidad 10.000 - 15.000 litros por hora, Tipo de máquina: Bactofuge (centrífuga para eliminar bacterias), Capacidad: 15.000 litros por hora, Velocidad del plato: 5.069 rpm, Motor: 22 kW

Unidad de refrigeración KÜBA, placa con el nombre no legible

El sistema de soldadura de revestimiento natural puede utilizarse en mesas de llenado o en líneas automáticas de relleno de todos los fabricantes

2 tanques idénticos con una capacidad de 25.000 l cada uno, con 4 pies, Agitador, Conector CIP Diámetro: 2800 mm Altura: 5600 mm Anteriormente se usaba para la producción de leche infantil Precio por pieza

Existe un refinador Baader para la separación de componentes blandos y sólidos. Capacidad de rendimiento: aprox. 800 kg/h, carga conectada: 3 kW, diámetro del orificio del tambor: 1 mm, dimensiones de la máquina X/Y/Z: aprox. 1100 mm/900 mm/1300 mm, peso: aprox. 450 kg. Es posible realizar una inspección in situ.

Existe un detector de metales pulsotrónico para productos líquidos y pastosos en sistemas de tuberías. Diámetro de la tubería: 100mm, presión máxima de funcionamiento: 10 bar, temperatura máxima de funcionamiento: 80 ºC, versión: EJ. Dimensiones de la máquina X/Y/Z: 1250 mm/550 mm/700 mm, peso: aprox. 50 kg. La inspección in situ es posible.