otras máquinas para el procesado de metales usadas para la venta (10,788)

Especialmente diseñado para pequeñas empresas y recubridores de llantas. La planta completa consiste en: Anchura X altura x profundidad del horno del polvo 1200 x 1600 x 1200 milímetros 15 kilovatios Ancho de cabina de polvo X alto x profundidad 2000 x 2240 x 920 Última pistola de pólvora de romer ProfiGun PM-1 Todo junto para 10,900.00 neto más los costos de flete y montaje Plazo de entrega aprox. 16 semanas.

x-travel: 550 mmy-travel: 1200 mmz-travel: 450 mmcontrol: 85er 8bit que de potencia total: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

x-travel: 3.400 mmy-travel: 1.250 mmz-travel: 2.000 mmControl: TNC-430PA table-size: 4.700 X 1.200 mmV- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Gradmain drive: 37 kWChip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos.milling head: Automatic Head 45º weight of the machine ca.: 35 t- Automatic Head 45º INCLUDED- Automatic Head 45º 0.001º/0.001º- Head 45º Max. Speed 3.000 rpm- 45º Head Taper ISO-50- Twist Head Contiuous INCLUDED- Twist Head Max Speed 3.000 rpm- Twist Head Taper ISO-50- Ram with Quill - Quill Diameter 150 mm.- Quill Taper ISO-50- Pick up station AITEK for 45º and Twist Heads- Rotary Table ZEATZ Ø 1200 INCLUDED- RENISHAW MP 16+SP2/1The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amplificación -fold: ? diámetro: 380 mm altura de la pieza de trabajo máx.: 200 mmvoltaje: 230 Vpeso de la máquina ca.: 245 kgdimensiones de la máquina ca.: 0,80 x 1,20 x 2,00 m- Número de serie: 1740

Cortadores shaper del Módulo 1 al Módulo 14 disponibles: - diferente no. de dientes, diferentes anles de presión, diferentes perfiles, orificios y tamaños! cortadores de eje Módulo 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro cortadores de discos Módulo 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. ¡lista completa bajo petición!

weight max. in kg: 800/400 kgstroke: 6/12 mmstroke speed: 5/8 m/minoutput: 1,25 kwconnected load frequency: 230 Vweight: 21 kgdimensions: 420 x 180 x 280 mmDue to the low installation height, the maximum lifting height remains available.Control with emergency stop. (required by law)Suspension with safety hook.Overload protection with slip clutch.Built-in limit switch.Collection bag for chain.Control console with 1.6 m cable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grosor: 16 x 16 mmnúmero: 4 Stählepeso: 3 kgmedidas: 300m x 200 x 50 mm

diámetro: 32 - 50mm der Buchsenlargüda: 350 mmanchura del casco: 10 - 12 - 14 mmpeso: 20 kgmedidas: 400 x 150 x 250 mmAnchuras de la ranura:10 - 12 - 14mmDiámetro de los arbustos guía:32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

: 8 St.rango L-W-H: 710 x 510 x 900 mmpeso: 67 kgTuermo de dibujo con 8 cajonesDimensiones del cajón 600 x 435 mmAltura del cajón: Sorteo 1 - 7, 81 mmDibujo 8, 173 mm

angle steel/side length: 50 x 50 x 5 mmround steel bars: 30 mmU-iron on the x-axis: 60 x 40 x 6 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 118 - 148 mmturning speeds: 9,3 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,425 tdimensions of the machine ca.: 1,5 x 0,8 x 0,8 m• Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5.further roller sets optionally:for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4,Surcharge for each extra roller set: € 440,-/setMachine in unused condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mmU-iron on the x-axis: 80 x 45 x 5 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 150 mmturning speeds: 10 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,92 x 1,4 m• Machine has a standard set of rolls for profile: flat (upright) 60 x 10, flat 80 x 15, Square 35, square pipe 45 x 45 x 2, rectangular pipe 60 x 30 x 3, Further sets of rolls can be supplied optionally,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud: 800 mm ancho: 500 mmalcama: 1000 mmpotencia de potencia: kWpeso de la máquina ca.: 0,3 tdimensiones de la máquina ca.: m2 unidades

Máquina de ensayo de tracción Fabricante: Karl Frank GmbH Tipo: 81559 Año de construcción: 1980 Prueba de pato: altura: 1000mm, ancho: 400mm, profundidad ungraenzt Rangos de fuerza: 2000N, 1000N, 500N, 200N, 100N, 50N Precio original en aquel momento: 49.855,00 DM ATENCIÓN: El dispositivo no se ha probado para la funcionalidad. Toda la información sin garantía

longitud de la mesa: 1000 mmanchura de mesa: 1000 mmcargaable: 1,5 t diámetro de la brida: 700 mmmácnico de giro: máx. 0,04 U/minpeso de la máquina aprox.: 1,2 tdimensiones de la máquina L x W x H: 1,60 x 2,0 x 1,50 m

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 7 units, drilling and thread cutting8 units, drilling and sinking 5 units, drilling, sinking and thread-cutting 2 unit),spindle taper SK 40 each, engine power of the individual unitsbetween 4.0 and 4.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 10 units, drilling and thread cutting5 units, drilling and sinking 3 units, drilling, sinking and thread-cutting 1 unit, thread cutting 3 units),spindle taper SK 40 each, engine power of the individual unitsbetween 4.5 and 5.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mmy-travel: 400 mmz-travel: 320 mmtool taper: HSK 63 spindle turning speed range: 0 - 10000 U/minrapid traverse: 30 m/minSystem for processing fittings, valve housings, etc.consisting of1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant deviceconnected by ABB handling robot with1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool t ...

diámetro: 400 mm = neumo. Mandril de 3 mandíbulas hacen RÖHM, 400 mmø, con brida CAMLOCK, longitud de la varilla de tracción 780 mm, ø de la varilla de tracción 40 mm, con unidad de mantenimiento

0: 680 x 450 x 430 mmpresión de funcionamiento: 3 - 6 barConsumo de aire: 250 l/min. peso de la máquina aprox.: 28 Kg: 0,76 x 0,5 x ,75 cm

Sistema de chorro de arena, cabina de voladura, cabina de voladura doble, dispositivo de limpieza de voladura de caja central utilizado El sistema consiste en la cabina de voladura para 2 trabajadores con mesa giratoria extensible, plataforma de trabajo y gabinete de control. Un sistema de succión y filtro con purificación de ciclón y aire comprimido, así como el dispositivo de voladura. Hesteller: desconocido Tipo: BFA-2-2 Diámetro de la mesa giratoria aprox. : 1,1 m altura máxima de la pieza de trabajo: aprox. 0,8 m Dimensiones cabina aprox. 2 x 1,8 x 3,7 m Dimensiones totales con dispositivo de entrada: aprox. 4,9 x 2 x 3,7 m Dimensiones pedestal: aprox.: 4.9 x 1 x 1.8 m Dimensiones del filtro: aprox. 1 x 1 x 2,7 m Cambios y errores en los datos técnicos, información y precios así como la venta intermedia reservada.

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

longitud: 5.000 mm ancho: 2.000 mmSalgo: 210 mmmaterial: Stahlguss queque de potencia total: kWPeso: 6000 kgdimensiones de la máquina ca.: mPlaca de medida / placa de alineación tan buena como nueva, con puntos de alineación integrados, 3 x ranuras en T longitudinales,

Horno 1200 temperatura de trabajo 100 - 1200 Celsius tamaño 1x1x2m puerta automática auto bogie

horno 1200 1x1x2m t máximo 1200 Celsius Plc puerta automática varios tamaños posibles

Qty. 300 Cestas de perfil de segunda mano (aprox. 300 piezas) Tamaño: 5750 x 900 x 500 mm - L x W x H Construcción de acero y galvanizado!

Horno 700 1.3x1.3x1.5m Puerta automática Plc máxima calidad

Horno 650 interior 1x1x2m t máx. 650C Plc podría ser de varios tamaños

horno de endurecimiento 1200 1x1x2m (posibles varios tamaños) t máximo 1200C

horno 700 Uterna Europa 80KW 700 Celsius