prensas usadas para la venta (1,706)

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 5000 €: 117.73 €: 40 to: fix : 900 mm: 900 mm: 1600 mm: 700 mm: 2050 (PSS: 2250) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x

: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 €: 590.19 €: 200 to: horizontal verschiebbar : 300 mm: 1900 mm: 320x210 mm: 5 mm/s: 20 mm/s: 2460 mm: 1600 mm: 2700 mm: 4800 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo shows mod. HDK 1570/150)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:063 tthroat:280 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:620 x 500 mmhole in the table:230 mmtable height over floor:800 mmram surface:310 x 255 mmram adjustment:63 mmpower requirement:5,5 kWweight:3,95 tdimensions (WxDxH):1,2 x 1,8 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

Prensa manual de pórtico 20 toneladas Dimensiones totales: 1200 x 800 x 500 mm Peso: 100 kg Auction-ID: A7-47248-224

pressure:15 tthroat:250 mmstroke:95 mmno. of strokes:0 - 60 /mindistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:440 x 300 mmhole in the table:45 mmtable height over floor:780 mmtable adjustable:100 mmram surface:100 mmweight:1,1 tdimensions (WxDxH):0,7 x 1,2 x 1,7 m

pressure:5 tthroat:150 mmstroke:40 mmno. of strokes:0 - 80 /mindistance table/ram, max. stroke up, adjustment up:260 mmtable surface area:340 x 270 mmhole in the table:45 mmtable height over floor:780 mmtable adjustable:120 mmram surface:60 mmweight:0,3 tdimensions (WxDxH):0,4 x 0,8 x 1,4 m

Pressure:080 tthroat:300 mmstroke:8 - 100 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:720 x 600 mmhole in the table:300 x 175 mmtable height over floor:860 mmram surface:400 x 270 mmram adjustment:60 mmpower requirement:7,5 kWweight:6,0 tdimensions (WxDxH):1,3 x 2,2 x 3,05 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12120 €: 232.7 €: 160 to: horizontal verschiebbar : 400 mm: 900 mm: 1450 mm: 6,2 mm/s: 9.8 mm/s: 1450 x 450 mm: 5,5 kW: 1640 mm: 1000 mm: 2550 mm: 1300 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure GaugeINCL. OPTIONAL EQUIPMENT:handwheel with locking pin for cylinder adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad 4 toneladas, manual, nunca usado Dimensiones totales: 500 x 400 x 800 mm Peso: 50 kg Auction-ID: A7-47248-249

: neu : ca. 10 Wochen ab Auftrags : Türkei : 104800 €: 1980.72 €: 150 to: 500 mm: 950 x 650 mm: 1200 x 750 mm: 750 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3650 mm: 9500 kg: 254 bar: 32 to: 200 mm: 120 mm: 160 bar: 40 mm/sec.: 720x540 mmlight curtaincushionmanual and automatic workingmanual stroke adjustment by camshaft switchmaintenance free self lubricating 4-fold ram guidingpolster plate with T-slotsaccording to ",CE", rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:160 tdistance between columns:1380 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1250 x 850 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:150 mmdie cushion area:450 x 450 mmtable height over floor:900 mmside window:250 x 400 mmram surface:1350 x 850 mmspeed down:400 mm/sspeed up:350 mm/sworking speed:50 mm/soil volume:1850 lpower requirement:58,0 + 11,0 kWweight:24,1 tdimensions (WxDxH):2,85 x 2,15 x 4,6 mGerman Safety: permitted for manual loading:CE-sign die cushion / ejector in table:hydraulic depth stop:motoric adjustable

pressure:075 tthroat:230 mmstroke:6 - 100 mmno. of strokes:105 /mindistance table/ram, max. stroke up, adjustment up:354 mmtable surface area:700 x 420 mmhole in the table:250 mmtable height over floor:800 mmpassage to the back:310 mmram surface:264 x 270 mmram adjustment:60 mmpower requirement:5,5 kWweight:3,6 tdimensions (WxDxH):1,2 x 1,6 x 2,3 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1

Prensa manual de pórtico 20 toneladas Dimensiones totales: 1200 x 800 x 500 mm Peso: 100 kg Auction-ID: A7-47248-176

pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:330 mmtable height over floor:820 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,3 tdimensions (WxDxH):1,6 x 2,2 x 2,9 m

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 €: 1181.25 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7.5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:350 mmtable height over floor:800 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,1 tdimensions (WxDxH):1,5 x 2,1 x 2,9 m

pressure:40 tdistance between columns:495 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:490 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:155 mmram surface:150 mmspeed down:480 mm/sspeed up:480 mm/sworking speed:20 mm/soil volume:115 lpower requirement:7,5 kWweight:2,2 tdimensions (WxDxH):1,35 x 1,1 x 2,2 mdepth stop:mechanisch foundation pit:nicht erforderlich

Pressure:200 tdistance between columns:1910 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1900 x 1150 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:300 mmdie cushion area:1500 x 950 mmtable height over floor:800 mmside window:1000 mmram surface:1900 x 1100 mmreturn capacity:36 tspeed down:400 mm/sspeed up:170 mm/sworking speed:30,5 mm/soil volume:1500 lheight over floor:4,85 mheight beneath floor:2,6 mpower requirement:45,0 kWweight:38,0 tdimensions (WxDxH):3,05 x 2,8 x 5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pressure:300 tdistance between columns:1220 mmstroke:1000 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1200 x 1000 mmpressure of drawing cushion in table:115 tstroke of drawing cushion in table:400 mmdie cushion area:1100 x 860 mmtable height over floor:900 mmside window:550 x 1000 mmram surface:1200 x 1030 mmspeed down:400 mm/sspeed up:350 mm/sworking speed:12 - 31 mm/soil volume:1080 lpower requirement:36,0 + 19,0 kWweight:22,0 tdimensions (WxDxH):2,5 x 2,5 x 6,3 mheight over floor:5,4 mheight beneath floor:0,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick hydraulic safety block and pump:Fabrikat Rexroth

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 €: 600 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 700 mm: hydraulisch : 80 mm/s: 6,5 mm/s: 80 mm/s: 750 mm: 280 l: 2 x 11 kW kW: 7600 mm: 2650 mm: 3950 mm: 52500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importser ...

pressure:100 tthroat:375 mmstroke:20 - 125 mmno. of strokes:30 - 80 /mindistance table/ram, max. stroke up, adjustment up:515 mmtable surface area:900 x 635 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:570 mmram surface:700 x 450 mmram adjustment:80 mmpower requirement:15,0 kWweight:8,0 tdimensions (WxDxH):1,5 x 2,4 x 3,5 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63320 €: 1196.75 €: 100 to: 2550 mm: Y1 / Y2 / X Achse : 265 mm: 2200 mm: 450 mm: 530 mm: hydraulisch : 180 mm/s: 10 mm/s: 120 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 100 l: 11 kW: 3800 mm: 1670 mm: 2850 mm: 7800 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A ...

pressure:400 tthroat:520 mmstroke:20 - 200 mmno. of strokes:30 /mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:1600 x 1000 mmtable height over floor:715 mmpassage to the back:1000 mmram surface:1300 x 800 mmram adjustment:130 mmpower requirement:38,0 kWweight:41,0 tdimensions (WxDxH):2,1 x 2,6 x 4,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:25 tthroat:400 mmstroke:1000 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:620 x 620 mmHole in the table:80 mmtable height over floor:650 mmram surface:110 mmspeed down:300 mm/sspeed up:500 mm/sworking speed:14 - 85 mm/soil volume:400 lpower requirement:6,0 kWweight:3,8 tdimensions (WxDxH):1,5 x 2,1 x 3,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:40 tdistance between columns:500 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:480 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:150 mmram surface:150 mmspeed down:480 mm/sspeed up:480 mm/sworking speed:20 mm/soil volume:160 lpower requirement:7,5 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary

pressure:400 tstroke:280 mmno. of strokes:56 Hub/mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:560 x 750 mmallowed max. force:600 tblow die to die:800 tspindle diameter:200 mmram surface:560 x 560 mmheight over floor:4,1 mpower requirement:37,0 kWweight:12,0 tdimensions (WxDxH):2,2 x 2,0 x 4,25 m

pressure:150 tthroat:520 mmstroke:30 - 200 mmno. of strokes:15 - 60 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1600 x 1000 mmhole in the table:1040 x 140 mmtable height over floor:1000 mmpassage to the back:1000 mmram surface:1400 x 800 mmram adjustment:120 mmpower requirement:20,0 kWweight:27,5 tdimensions (WxDxH):2,3 x 2,75 x 4,5 mclutch-/ brake combination:pneumatic; Ortlinghaus overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:semi-automatic Option: NEW electrical controls:Siemens S7-1500 F

pressure:25 tthroat:355 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:500 x 500 mmhole in the table:180 mmtable height over floor:700 mmram surface:250 x 250 mmpower requirement:7,5 kWweight:2,1 tdimensions (WxDxH):1,45 x 0,9 x 2,55 m