trabajo con chapas de metal usadas para la venta (3,357)

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,35 tdimensions of the machine ca.: 1580 x 1200 x 1410 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: 120 kWweight of the machine ca.: 78 tdimensions of the machine ca.: 6100 x 5150 x 4300mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6mm total power requirement: 11 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4880 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mmdouble T-iron on the x-axis: unbkt. mmU-iron on the x-axis: unbkt. mmtotal power requirement: 30 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: 2500x2000x1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 (500) mm: 45 (500) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 80 x 9 (800) mmAxis diameter: 60 mmwork speed: 5,0 m/minTool diameter: 195 mmtotal power requirement: 3 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,9 x 1,2 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 5,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 130 mmtotal power requirement: 4,0 KWweight of the machine ca.: 1,15 tdimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

espesor de la placa: 1,6 mmpresión: 450 MPa: 150 x 150 x 90 superfusión de superficie table: 650 x 500 mm: 875 mm ángulo de corte - hoja superior: 4 peso de la máquina aprox.: 75 kg• máquina de muesca manual con marco inferior • espesor de chapa (acero 450MPa) a 1,6 mm, aluminio a 2,25 mm, plástico a 3,0 mm, • máquina para demostración

ancho de chapa: 2020 mmpulso de placa: 1,5 mmdistancia entre columnas: 2050 mmAbra a la luz del día: 100 mmrequeo de potencia total: 0,75 kWpeso de la máquina aprox.: 1 tdimensiones de la máquina ca.: 2,7 x 1 x 1,5 m

plate thickness: 1,25 mmroll-body distance: 250 mmthroat: 260 mmdistance between roll centers: 62 mmtool adaptor: 26 mmspeed: 6,3 m/mintotal power requirement: 0,7 kWweight: 170 kgrange L-W-H: 1020x600x1500 mmDomestic equipments:- motor driven beading machine- 5 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de chapa: 1500 mm espesor de placa: 1,5 mmdistancia entre columnas: 1500 mm ángulo de flexión máx.: 135 queque de potencia total: - kWpeso de la máquina ca.: 0,36 tdimensiones de la máquina ca.: 1,7 x 0,7 x 1,3 m

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 13mm total power requirement: 22 kWweight of the machine ca.: 21,3 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,385 tdimensions of the machine ca.: 930 x 730, x 1400mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,570 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4260 x 1160 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 30mm (S) total power requirement: 37 kWweight of the machine ca.: 15,3 tdimensions of the machine ca.: 4510 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16 total power requirement: 37 kWweight of the machine ca.: 23,81 tdimensions of the machine ca.: 6560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1000 x 700 x 1380mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Freno de prensa TRUMPF TrumaBend V 85 Año de construcción 1999 máquina características técnicas: longitud de trabajo 2050 mm - Paso de pie 1750 mm - fuerza de prensado 850 kN - Tabla de distancia / émbolo 410 mm - Proyección del stand 410 mm - Carrera del émbolo 285 mm - Velocidades de elevación - Trayectoria rápida de velocidad descendente 200 mm/seg - Velocidad ascendente 135 mm/seg - Velocidad de prensa descendente 1 - 11 mm/seg - Potencia total de accionamiento 13 kVA - Requisito de espacio aprox.B 3700 x H 2700 x D 2100 mm - Peso aprox. 8000 kg

VERRINA CLR 216 X 4050 Dobladora redonda de chapa metálica Doble rodillo con 4 rodillos y doble presión Año de fabricación 1979 Capacidad 4000 mm x 16 mm Longitud del rodillo 4050 Rollo diámetro lateral rollos 370mm superior & rollo inferior 410mm Rodar subida y bajada 370mm Entrada 400/3/50 Hz 52 kW Velocidad de rodadura 2.9 / 3.9 / 6.8 metros por minuto Panel de control Equipado con gota hidráulica, polipasto de cable de seguridad Longitud 9000mm Ancho 2350 mm Altura 2400 mm Peso neto aprox. aprox. 29.500 kg

características técnicas: - Capacidad de presión 100 KN / 10 t - Fuerza de compresión ajustable 0 - 100 kN - Longitud de carrera 0 - 150 mm - Ancho claro aprox. 200 milímetros - Velocidad de elevación 0 - 0,6 m/min - Altura de la herramienta hasta aprox. 100 milímetros - Rendimiento de flexión - con prisma MW 100 plana a aprox. 100 x 12 mm - Tubo de flexión hasta aprox. 1 pulgada - Potencia direccional Wy a distancia de bloque de enderezamiento de 1m 100 cm³ - Accionamiento 400 V / 1,1 kW - Requerimiento de espacio aprox. Anchura 1100 x A 1000 x D 650 mm - Peso aprox. 400 kilogramos

Máquina de doblado giratoria hidráulica - máquina de pedidos (tiempo de entrega aprox. 10-14 semanas), incluido. coronación dinámica hidráulica, pantalla táctil, Regulación de la presión de la mejilla superior, retroagraba (1000mm), patas de cabra con sujeción automática de la herramienta, electr./hydr. Ajuste de la mejilla de flexión -Ilustraciones similares-

plate thickness: 2,5 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 92 mmtool adaptor: 35 mmspeed: 3,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 295 kgdimensions of the machine ca.: 1200x700x1200 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mmsquare edge steel: 40 x 40 mmL-beam: 140 x 13 mmPunch power: 900 kNhole punching press: throat: 510 mmhole punching press: max. length of stroke: 29 mmhole punching press: capacity (dia. x thick.): 31 x 20 mmnotching: l + T material: 80 x 14 mmno. of strokes: 40 / 45 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 3,7 tdimensions: 2,1 x 0,7 x 2,12 mAccessories: various punches and diesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 4000 mmdistance between columns: 3060 mmcontrol: FORTRON CNC 10 H 4 throat: 280 mmstroke: 250 mmdayligth: 500 mmtable length: 4050 mmtable width: 280 mmfeed down: 70 mm/secfeed up: 68,4 mm/secworking feed: 9 / 3,5 mm/secoperating pressure: max. 205 baroil volume: 400 ltotal power requirement: 19,5 kWweight of the machine ca.: 20,8 tTotal weight including accessories: 22 tdimensions of machine L x W x H: 4,8 x 1,88 x 2,93 mdimensions of switch cabinet: 1,6 x 0,5 x 2,25 mAcc.: programmable back gauge, upper and lower dies, table extensionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 6 total power requirement: 7,5 kWweight of the machine ca.: 4,340 tdimensions of the machine ca.: 3830 x 1160 x 1180mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 9,7 tdimensions of the machine ca.: 5310 x 1660 x 1590 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmdistance between columns: siehe TD mmpre-bending: siehe TD total power requirement: 3 kWweight of the machine ca.: 1,06 tdimensions of the machine ca.: 1260 x 1350 x 1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 18,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4260 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD 0: 20mm (s) Ampullen/h0: mm0: mmtotal power requirement: 22 kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: 4260 x 1660 x 1590 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.