trabajo con chapas de metal usadas para la venta (3,340)

sheet width: 3050 mmplate thickness: 13.0 mmthickness at Niro-steel: 8.0 mmcutting angle: 0.5 - 2.5 °no. of strokes: 8 - 25 Hub/minback stop - adjustable: max. 1.000 mmControl: SIEMENS Number of downholders: 13 Stk.oil volume: 300 ltr.engine output: 21.0 kWweight: 8700 kg.range L-W-H: 3950 x 2200 x 1900 mmFeatures:- Robust electro-hydraulic sheet metal shear Design: Circuit-guided- NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values- NC electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front via handwheel- Recessed grips in the front support table- Front finger guard- 1x long side fence- 1x long support arm- 1x freely movable foot switch- Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de trabajo: 1350 mm Ancho de pieza - máximo: 160 mm Peso de la máquina aprox: 4000 kg Incluido: - Accesorio de vacío húmedo - Cepillos de repuesto - Manual de usuario Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 17300 €: 332.16 €: 1 : 2050 mm: 3 mm: 130 mm: 3,5 m/min: 2.2 kW: 3200 mm: 750 mm: 1000 mm: 1500 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorHARDENED ROLLSmanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in GERMANOPTIONS (PRICES ON REQUEST):(time of delivery with options approx. 8 weeks)Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 €: 1948.59 €: 2550 mm: 25 mm: 25 mm: 20 mm: 20 mm: 16 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5500 mm: 2000 mm: 1900 mm: 13000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

Incluyendo varios dados SIN troqueles Fecha de recogida: 10:08 - 12:08 Auction-ID: A1-48584-9

: gebraucht : WA0127 : 1230 €: 1 : 2500 mm: 70 mm: 70 mm: 8/11/12/16/24/36 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 €: 3038.89 €: 3 kW: - : 12 mm: 6 mm: 6 mm: 3 mm: 6 mm: 26,5 kW: 250 mm: 16 mm: 160 x 160 mm: 200 x 150 mm: 6000 mm: 58 kg/m: +/- 0,2 mm: +/- 0,05 mm: rund, quadratisch, rechte : 40 m/min: 94 m/min: 30 m/min: 510 °/sThe machine consists of the following components:- Encapsulated cutting room with protective glazing- CNC graphic control with touchscreen- Laser source Brilase 3 kW Premium incl. chiller- Cutting head with automatic focus adjustment- manual loading-manual unloading table 3 m- Positioning laser- Central lubrication- slug car- CAD/CAM software with autonesting- Work area lightingPRICE FCA TÜRKIYEOPTIONS:Suction unit with filtersSemi-automatic loading systemManual unloading table 6 m with conveyerDurma cloud licenseLasersources with 4 or 6 kW on requestThe data for this ad was created with ModulMWS - the software solut ...

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 €: 1 : 1 : 1050 mm: 1 mm: 56 mm: 1400 mm: 700 mm: 1120 mm: 185 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0125 : 122 €: 1 : 835 mm: 0,4 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: gebraucht : WA0041 : 790 €: 1 : 835 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: gebraucht : WA0042 : 950 €: 1 : 835 mmmint condición Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: gebraucht : WA0007 : 217 €: 1 : 835 mmmint condición Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

: gebraucht : WA0032 : 228 €: 1 : 835 mm Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Potencia: 9 kWParámetros de funcionamiento: 110 t – Cuello de ganso 500 mm – Carrera ajustable 0 a 60 mm – Cadencia 37 rpm (carrera 20 mm) Capacidad de acero 45 kg/mm²: Ø 40 × 14 mm – Ø 28 × 16 mmEquipamiento incluido: 20 juegos de punzones y matrices Ø 8 a 27 mm – Capacidad de tope semi-paxy 1000 – Control numéricoFagor Fuente de alimentación: Bomba 28 l/min – 230 barAño & Fabricante: 2007 –GEKA Dimensiones (mm): 1300 × 1300 × 1850Peso (kg): 1715Notas: Número de serie 10138 1955 incluido en la descripción. Auction-ID: A1-48608-17

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 €: 1060.29 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3 kW: 3850 mm: 1700 mm: 1860 mm: 3700 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rules(sample photo showing model V-AMH 2535 2 axes NC control)OPTION:2 axes NC control with touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 070008 : prompt, Zwischenverkauf v : Deutschland : 1200 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mm con freno Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 €: 2107.35 €: 3100 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 6000 mm: 2200 mm: 1900 mm: 15000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 €: 1398.6 €: 1350 mm: 0,5 - 170 mm: 1370 x 2200 mm: 4000 m³/h: 200 mm: 6 bar: 78 (+/-2) dB: 1750 mm: 2100 mm: 2180 mm: 2000 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Bonnets for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via frequency co ...

: 1 Herramientas de flexión con excelente relación calidad-precioTemple por inducción, con superficies de trabajo rectificadoLongitudes estándar: 835 mm, 415 mm y 835 mm (dividido). Para sistemas de sujeción de herramientas como: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener y muchos más, los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : 2026 : 070155 : prompt, Zwischenverkauf v : Türkei : 6900 €: 133.17 €: 1 : 500 kg: 1200 mm: 400 mm: 550 mm: 300 mm: 80 mm: 1450 mm: 1200 mm: 1640 mm: 260 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPNEUMATIC PRESSURE ARMALTERNATIVES (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 134000 €: 2532.6 €: 3100 mm: 25 mm: 25 mm: 20 mm: 20 mm: 20 mm: 16 mm: 360 mm: 360 mm: 270 mm: 60 mm: 1510 mm: 22 kW: 5560 mm: 2060 mm: 2050 mm: 16750 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24800 €: 476.16 €: 60 to: 500 mm: 5 : 2 : 40x11 mm: 32 1/min: 350x10 mm: 120x10 mm: 45/40 mm: 100x10 mm: 150x10 mm: 5.5 kW: 2100 mm: 1400 mm: 2060 mm: 1750 kg5 workstationsfoot pedal triggerhydr. driveflat steel shears incl. Device for reducing the deformationangle iron scissors with round and square bar openingtriangle clawpunching and bending device for flat irontable at the flat steel and notching stationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63600 €: 1202.04 €: 3200 mm: 2 mm: 1.2 mm: 3 mm: Motorisch : 4450 mm: 2200 mm: 1900 mm: 4500 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal inserts ...

: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 €: 142.82 €: 1 : 197 mm: 4 mm: 2 mm: 20 1/min: 90 °: 4 kW: 890 mm: 780 mm: 1115 mm: 550 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 €: 109.71 €: 1050 mm: 3 mm: 2 mm: 90 mm: 2080 mm: 700 mm: 1250 mm: 410 kg3 rollsasymmetric rolls - prebending2 rolls driven by handwheellateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Juego de máquina de doblado y muescas de tubos – JD2 Modelo 32 + JD2 Mutch Master Descripción Conjunto completo de procesamiento de tuberías que consiste en una máquina de doblar tubos JD2 Modelo 32 y una máquina de muescas de tubos JD2 Notch Master. El sistema permite la fabricación completa de estructuras de tuberías, desde la flexión hasta la preparación precisa de las juntas. Especificaciones técnicas Fabricante: JD Squared (EE. UU.) Máquina de flexión de tubos – Modelo 32 • Accionamiento mecánico (sistema de trinquete) • Ángulo máximo de flexión: 180° • Diámetro del tubo: aprox. Ø12 – Ø63 mm • Diseño industrial robusto Las herramientas incluyeron: • Chips para tubos de 22 mm y 25 mm Existen otros tamaños de troqueles para este modelo Notcher de tubería – Mutch Master • Sistema de corte con sierra de corona • Ángulo ajusta ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 25 mm: 25 mm: 16 mm: 20 mm: 18 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: gebraucht : WA0011 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint condición Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.