trabajo con chapas de metal usadas para la venta (3,363)

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 €: 2740.5 €: 6080 mm: 6 mm: 4 mm: 350 mm: 10 1/min: 0.5 - 2 °: 29 : 20 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 5 Stk.: 900 mm: 630 mm: 6370 mm: 7300 mm: 2150 mm: 3400 mm: 2750 mm: 25500 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portCNC controlled cutting gap adjustment by the table (patented)oil coolermanual central lubricationcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale5 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHPRICE FCA TURKEY(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm: 8,5 U/min: 100 kNroll diameter: 162 mmDrive: 1,5 kWrange L-W-H: 1100x850x1350 mmweight: 495 kgEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 1.5 mm STbending angle max.: 180 °Swing beam adjustment: ca. 20.0 mmBending time for 90°: 5.5 sekControl: konv. voltage: 380 Vtotal power requirement: 1.5 kWweight: 1180 kgrange L-W-H: 2650 x 1230 x 1100 mmFeatures:- Simple electric motor-driven swivel bending machine- Manual depth/material stop Stepless adjustment up to a maximum of 700 mm Adjustment via handwheel from the rear Analog position display - Simple manual angle adjustment- 1x bending tool set With bending rail .. 10 mm- Manual lower crossbar adjustment .. approx. 20.0 mm- Emergency stop button on the front - 1x freely movable double foot switch- Operating instructions (DK)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 tworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWload capacity drive unit: max. 2500 kgload capacity rotating unit: max. 2500 kgweight of the machine ca.: 0,9 tThe self-adjusting D-HGZ roller blocks adapt to the differentDiameters of your workpieces yourself. This roller block is for specialdesigned for heavy-duty activities. Furthermore, this roller block is forSuitable for thin-walled workpieces, as the four wheels per unit are an improvedSupply pressure distribution. || Features: | - Electronic components ofTop quality | - Infinitely adjustable speed of the drive unit | -Wheels fitted with solid rubber tires enclosed in oneSteel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recoveryYour investment. | - The D-HGZ series is supplied as a standard version andincludes a remote control ...

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgconnected load: 400/50 V/HzEquipment / Accessories:- Three driven rollers- Manual delivery of the upper roller- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mmsquare edge steel: 45 mmL-beam: 150 x 14 mmtotal power requirement: 4 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,3 x 1 x 2,1 mNo. 34185-fold combined profile steel shears with flat steel shearsPEDDINGHAUS 210 Super 16pressure capacity 80 toRound steel 50 mmSquare steel 45 mmangle steel 150 x 14 mmPunching up to 90 mm diameter5.5 HPSpace requirement 2.30 x 1.0 x 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 150 mmworkpiece length: 1300 mmwork piece width: 800 mmmax. dia. of grinding wheel: 150 mmturning speed range: 0 - 2830 U/minwork height max.: 945 mmmilling-head swivable +/-: 180° engine output: 1.5 kWweight of the machine ca.: 230 kg.dimensions of the machine ca.: 1435 x 1100 x 1510 mmThe Easy T is the cost-effective alternative to the conventional onesgrinding and deburring machines. His head consisting of a grinding wheeland a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components.Furnishing :- Deburring and rounding of laser-cut or stamped sheet metal parts- Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180°- Working area ...

sheet width: 6040 mmplate thickness: 4 mmtotal power requirement: 12 kWweight of the machine ca.: 22 tdimensions of the machine ca.: m- Specification- backstop- Roller trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 2 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/mintotal power requirement: 3,0 kWdimensions of the machine ca.: 3600 x 2200 x 1600 mmweight: 4500 kgEquipment:- Electric motorized backgauge- With digital ELGO position display- Manual cutting gap adjustment- 1x side stop with mm scale- 2x support arms- 1x freely movable double foot switch- Front finger guardSpecial accessories included:- Pneumatic sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 4 mmdistance between columns: / mmweight of the machine ca.: 3,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kgworkpiece diameter: 20 - 800 mmtotal power requirement: 0,75 kWtraversing speed: 80 - 1600 mm/minweight of the machine ca.: 56 kgrange L-W-H: 520 x 470 x 390 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80 mmroll diameter: 260 mm: 7 U/min: 170 mm: 27 kN: 160 mm: 450 mmtotal power requirement: 3,7 kWdimensions: 980x1430x1600 mmweight: 1380 kgAccessories / equipment:- Three driven rollers with a smooth surface- Hydraulic delivery of the upper roller- Working position horizontal and vertical- Digital display with memory function- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can benddifferent profiles are used e.g. Flat iron, T-iron, solid materialetc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angular steel - leg outwards: -- mmdouble T-iron on the x-axis: -- mmU-iron on the x-axis: -- mm: 50 mm: 150 mmthroat: 120 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,1 x 0,8 x 1,4 mExhibition machine NEW, year of construction: 2021The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel.The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.- Manual adjustment of the top roller with a handwheel- Vertical and horizontal work possibility- 3 driven rollers- Supplied with a standard roller set- Foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 €: 389.95 €: 1 : 0.6 - 4 mm: 300 mm: 900 mm²: 80 mm: 10 Nm: 2.62 kW: 1000 mm: 800 mm: 1400 mm: 330 kgDEMO MACHINEhelical gear box Wattdrivepneumatic equipment Festocontrol SCHNEIDER with touchscreen2 driven rollsremote service modulehand wheel Euchneroperating manual in German with EC conformity declarationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmpre-bending: 5 mmupper roll diameter: 200 mmmin. bending diameter: Ø 300 mmbending speed: 5 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 4.000 kgdimensions of the machine ca.: 4800x1300x1270 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400/50 V/Hzhydraulic pump: 1,1 kW: 80 kNrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgEquipment / Accessories:- Three driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400/50 V/Hzhydraulic pump: 1,1 kW: 80 kNrange L-W-H: 900 x 600 x 1000 mmweight: 470 kgEquipment / Accessories:- Three driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turnused different profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mmmaterial thickness: 2 mmdiameter: 1200 mmtotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 10 mmcutting angle: 2 °down holder: 14 Stückno. of strokes: 13 Hub/minthroat: 350 mmoil volume: 260 lcontrol: CYBELEC CybTouch 8 total power requirement: 22 kWweight of the machine ca.: 10.550 kgdimensions of the machine ca.: 4000x2250x2050 mmDomestic equipments:- Hydraulic swing cut sheet metal shears- Touch screen controller with digital display for backgauge- automatic kerf adjustment via the control- Backgauge control 1000 mm travel with recirculating ball screws- Vibration cutting machine with kerf adjustment- 2 support arms- 1 side stop- Photocell behind the machine- Cutting length limit- cut line lighting- Chrome steel knife- Ball rolls in the table- hinged finger guard with limit switch- Footswitch- CE mark / Declaration of Conformity- Bed instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTec ...

plate thickness: 4 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 132 mmtool adaptor: 40 mmspeed: 5 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1650x700x1280 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tchamfer lenght: 2600 mmdistance between columns: 2200 mmcolumn arm: 250 mmram stroke speed: 90.0 mm/secwork speed: 7.5 mm/minreturn speed: 60.0 mm/secwork stroke: 160 mmdayligth: 380 mmtable height: 900 mmoil volume: 150 ltr.voltage: 400 Voltweight: 5227 kgrange L-W-H: 3750 x 1950 x 2400 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- AKAS laser in front of the machine- manual crowning- Upper tool, deer foot- Lower tool, die block with 4Vs- SICK light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3400 €: 1270 mm: 1.2 mm: 68 mm: 1.5 kW: 1610 mm: 700 mm: 1160 mm: 385 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 4100 mmdistance between columns: 3700 mmcolumn arm: 415 mmstroke: max. 215 mmdayligth: 410 mmajustment speed: 200 mm/secworking feed: 10.0 mm/secreturn speed: 150 mm/secwork height max.: 1080 mmtable width: 100 mmControl: CYBELEC oil volume: 160 ltr.voltage: 400 Vpower capacity: 8.5 kWweight: 10200 kgrange L-W-H: 4800 x 1800 x 2600 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Phcik_oo4CEEquipment:- BEYELER electro-hydraulic CNC press brake- CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right- CNC-controlled axes (Y1+Y2-X)- CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping- Manual lower tool clamping- Rear safety device (safety door)- Side safety dev ...

pressure: 180 tchamfer lenght: 3110 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secback stop - adjustable: max. 750 mmstroke: 260 mmdayligth: 460 mmtable height: 880 mmoil volume: 210 ltr.operating pressure: max. 240 barcontrol: DELEM total power requirement: 15.0 kWweight of the machine ca.: 11.200 kg.range L-W-H: 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on requestFeatures:- Electro-hydraulic CNC press brake- With DELEM CNC control model DA 66W” 2D graphic programming Automatic bend sequence calculation and collision detection High-quality LCD screen (TFT) Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning- CNC electric motor-driven backgauge (X axis) with 2x manually adjustable stop fingers- CNC electric motor height adjustment of t ...

plate thickness: max. 5.0 mmtube diameter: 27.9 - 61.0 mmmotor: 400 Volttotal power requirement: 2.2 kWweight of the machine ca.: 93.0 kg.The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time.With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼), Ø 48.3 (1 ½), Ø 60.3 (2?).This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3.Do you often notch pipes? Then the electrically driven pipe notcherAL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor  ...

plate thickness: 4 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 132 mmtool adaptor: 40 mmspeed: 5 m/mintotal power requirement: 2,2+0,55 kWweight of the machine ca.: 450 kgdimensions of the machine ca.: 1800x700x1600 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mmroll-body distance: 260 mmthroat: 500 mmdistance between roll centers: 92 mmtool adaptor: 35 mmspeed: 3,5 m/mintotal power requirement: 1,5+0,55 kWweight of the machine ca.: 320 kgdimensions of the machine ca.: 1200x700x1200 mmDomestic equipments:- motor driven beading machine- 3 sets of bead rollers- Footswitch- Operating instructions in German- CE mark / Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 bar: 660 l/min.: 520 l/min.turning speeds: 1000 U/mincontainer volume: 90 lpower capacity: 4 kWvoltage: 400 Vweight: 102 kgdimensions: 1110x495x1015 mm- Mobile piston compressor with horizontal tank- Compressed air tank equipped with safety valve, container pressure gaugeand condensate drain valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mmplate thickness: 6.5 mmpre-bending: 4.5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmdistance: max. OW zu UW 20,0 mmtotal power requirement: 2.2 + 1.5 kWweight of the machine ca.: 2370 kg.range L-W-H: 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use () Special price on requestEquipment:- electro-hydraulic 4-roller round bending machine with driven top roller + bottom roller stable welded construction- Area of application: light to heavy sheet metal processing (steel/aluminum/stainless steel)- electro-hydraulic adjustment of the bottom + side rollers- linear guidance of the side rollers- top roller driven by robust electric motor + planetary gear- freely movable, separate control panel- hardened rollers SAE 1050 (CK 45) + crowning - conical bending device- 3x axis digital display for precise roller positions- el ...