trabajo con chapas de metal usadas para la venta (3,366)

sheet width: 5 mmplate thickness: 1000 mmdistance between columns: mmtotal power requirement: 4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

I - beam section - flat steel: 80 x 20 (d 1200) mmI-beam section - upend: 80 x 25 (d 2100) mmL-beam: 50 x 50 x 6 (d 1000) mmbar material - diameter: 40.0 (d 800) mmsquare material: 60x60x3 ( d 4000 ) mmrectangle: 80x30x3 ( d 6000 ) mmroll surface width: 177x60 (18x5 Nut) mmbar material dia. max.: 70 x 2.0 (d 1600) mmtool adaptor: 60.0 mmturning speeds: 6.4 m/min.oil volume: 80.0 Litertotal power requirement: 4.75 kWweight: 1080 kgrange L-W-H: 940 x 1260 x 1390 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on requestEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool ...

sheet width: 2000 mmsheet thickness - max.: 6 mmconnected load: 7,5 kW: . with crowbar: . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 tworkpiece diameter: 100 - 2500 mmtotal power requirement: 2 x 0,37 kWload capacity drive unit: max. 2500 kgload capacity rotating unit: max. 2500 kgtable turning speeds: 100 - 1000 mm/mindiameter of running wheel: 250 x 140 mmweight of the machine ca.: 0,9 tIncl. double foot pedal (start-stop / left-right)Incl. remote control (on the cable) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: für Draht hydraulically tiltable: ja : 2 t Year: unbekannt : Hydraulik Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control panel: Boschert Stanze Year: 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1050 mmcolumn arm: 350 mmdayligth: 387 mmwork stroke: 170 mmtable height: 850 mmback stop - adjustable: 800 mmadjustment speed: 230 mm/minajustment speed: 140 mm/secworking feed: 10.0 mm/secreturn speed: 170 mm/sectotal power requirement: 5.5 kWweight of the machine ca.: 3220 kgdimensions of the machine ca.: 2150 x 1650 x 2300 mm--------------------------------------------------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds--------------------------------------------------Furnishing:- DELEM CNC control model DA 58T (TouchScreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool w ...

sheet width: 3020 mmplate thickness: 5 mmdistance between columns: 3020 mmControl: Simatec OP7 stroke: 450 mmback stop - adjustable: 2000 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 4200 x 1600/2900 x 2000 mmFeatures:- Motorized rear stop, 1000 mm- Hydraulic upper beam adjustment- Motorized lower beam adjustment- Hydraulic tool clamping- Side guard- Foot switch- Operators manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Hebefix A10 weight max.: 10 tmachine weight ab.: 49 kg (2 Stück) kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 100 tround bar steel: 50.0 mmsquare edge steel: 50 x 50 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 30.0 x 26 mmshear: flat material: 600 x 15 mmthroat: 300 mmwork stroke: 80.0 mmwork height max.: 1165 / 960 mmtotal power requirement: 9.0 kWweight: 2250 kgrange L-W-H: 2050 x 1200 x 2050 mm well-maintained condition () current new price approx. 30.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations Flat steel shears Profile steel shears Hole punch notching station- driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at hole punching station- Material scraper- Lateral storage options- 2x freely movable foot switches- Many accessories included in the scope of delivery swiveling machine lamp Various punch dies Spare blades for the flat steel station ... etc.-  ...

sheet width: 1250 mmplate thickness: 1.5 mmroll length: 1270 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 400 kgrange L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 3.0 mmdistance between columns: 2100 mmback stop - adjustable: 550 mmno. of strokes: 35 Hub/mincutting angle: 2°12 table width: 400 mmtable height: 850 mmControl: konv. total power requirement: 3.0 kWweight of the machine ca.: 1280 kgdimensions of the machine ca.: 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features:- Robust / high-performance electromechanical guillotine shear- Manual material backgauge Continuously adjustable range Adjustment from the back via handwheel Includes mm scale Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front- 1x side stop with mm scale- 2x support arms- 1x freely movable foot switch- rear sheet metal chute- rear safety device (light barrier)- operating instructions (machine control system)- Transport stand (homemade)The data for this ad was  ...

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm: 5.5 mm: 5.0 mmroll diameter: 130 / 195 mm: 2.2 kW: 1050 kg: 2150 x 900 x 1200 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 20x20 / 25x25 mmflat steel: 100 x 7.0 mmround bar steel: 22.0 / 27.0 mmL-beam: 100 x 10 mmweight of the machine ca.: 33.0 kg.range L-W-H: 900 x 430 x 310 mmFeatures- For precise cold and hot bending of flat, round and square steels- Sturdy design for bolting to the workbench- Infinitely adjustable bending stop- With eccentric quick clamping for efficient working- Readable bending angle up to 120- High repeat accuracy thanks to bending angle stop- Ideal for repair workshops and locksmiths- - - - -Bending performance cold :Flat steel 100 x 7 mm 65 x 12 mmRound steel 22.0 mmSquare steel 20 x 20 mmAngle steel 100 x 10 mm- - - - -Bending capacity hot :Flat steel 100 x 15 mm 75 x 20 mmRound steel 27.0 mmSquare steel 25 x 25 mmAngle steel 100 x 15 mm- - - - -Scope of delivery- Bending plate- Angle stop stepless- Clamping block with eccentric cl ...

x-travel: 4000 mmy-travel: 2000 mmz-travel: mm: 4000 bartotal power requirement: 35 kWweight of the machine ca.: tdimensions of the machine ca.: mMicroStep CNC water jet cutting system AquaCut-W 4001.20with the following features:• BFT high pressure pump ECOTRON ® 40.37• Desludging system (scraper conveyor) for a length of 4,000 mm• Water softening using water chemistry1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm}MicroStep® machine control with MML console and 24 touchscreenTwo LCD operating units on the portalLaser pointer with automatic offset transmissioniMSNC® module / expert systemiMSNC® module / assistant for service and maintenance workiMSNC® module / assistant for loading CNC programsiMSNC ® module / automatic calibration of mechanical scanningiMSNC® module / management of cutting programs (MRP}iMSNC® module / EcolnfoiMSNC® module / machine ...

round bar steel: 45 mmsquare edge steel: 40 mmL-beam: 120 x 13 mmflat steel: 500 x 12 mmpunching pressure: 60 tthroat: 510 mm: 500 x 12 oder 400 x 16 mmpunch diameter: 27 in 17 mmpunch diameter: 39 in 12 mmoil volume: 80 ltotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,8 x 0,9 x 1,8 mHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10,0 tworkpiece diameter: 320 - 3200 mmtotal power requirement: 1,1 kWload capacity drive unit: max. 5000 kgload capacity rotating unit: max. 5000 kgweight of the machine ca.: 1,6 tThe self-adjusting D-HGZ roller blocks adapt to thedifferent diameters of your workpieces yourself. This role block isdesigned for particularly heavy work. Furthermore, thisRoller block suitable for thin-walled workpieces, as the four wheels per unitdeliver improved pressure distribution.Characteristics:- Top quality electronic components- Infinitely variable speed of the drive unit- Wheels fitted with solid rubber tires enclosed in onesteel construction- Heavy construction enables very high stability.- Good value for money allows for quick recoveryyour investment.- The D-HGZ range is supplied as a standard version and includes aRemote control with digital reading.Accesories:- Double foot pedal (s ...

pressure: 170 tchamfer lenght: 4080 mmdistance between columns: 3680 mmcolumn arm: 410 mmdayligth: 385 mmstroke: 215 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/sectable width: 200 mmtable height: 1050 mmNumber of working hours: 25.430 hoil volume: 350 ltotal power requirement: 29 KVAweight of the machine ca.: 16.450 kg.range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4Equipment:- CNC electro-hydraulic press brake/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency stop button at front - CNC  ...

sheet width - max.: 2535 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: 20 Hub/mincutting angle: 1.7 °work height max.: 900 mmtotal power requirement: 8.5 kWweight of the machine ca.: 3400 kgrange L-W-H: 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition ()Features:- Robust electro-hydraulic guillotine shear swing cut”- Electric motorized backgauge- Electric cutting length limiter- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment - from the front- Front support table incl. recessed handles- 1x stable side stop, with scale and tilt cam- 3x stable front support arms- 1x freely movable foot switch- Front finger guard- EMERGENCY STOP button at the front- Operating instructions Special accessories included:- Pneumatic sheet metal holding device for thin sheet metal cutsT ...

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 20 mmspeeds: 2850 U/minrange of angles: 0 - 60 (stufenlos) °weight of the machine ca.: 19,5 kgMaximum chamfer width 20 mm + face machiningDesigned for chamfering and deburring straight edges, for theso-called FACING - removing an unwanted layer of material on theFront side of the workpiece, which is created, for example, by flame cutting a sheet metal.Specially developed for the production of visible chamfers andweld preparations. Powerful electric drive for extremeCharges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted onesLayers of material after flame cutting The unique mechanical scale to adjust the bevel width for higherprecision A very compact and ergonomic design for high work productivity Circumferential protective ...

I-beam section - upend: 100 x 20 (d 2100) mmbar material dia. max.: 100 x 3 (d 3000) mmL-beam: 80x80x8 (d 2000) mmsquare material: 50 x 25 x 2 (d 600) mmI - beam section - flat steel: 120 x 30 (d 600) max.140b mmbar material - diameter: 60.0 (d 1000) mmtool taper: 80.0 mmoil volume: 100 Literturning speeds: 4.2 m/min.weight: 1600 kgrange L-W-H: 1240 x 1375 x 1540 mmEquipment:- electro-hydraulic ring/profile bending machine- hydraulic bottom/side roller adjustment for extra small bending radii- bottom/side roller can be adjusted individually- 3x driven rollers- divided roller segments- digital position display of the bottom/side rollers Display with touchscreen function- hardened tool holder (42CrMo4)- machine base- 2x hydraulically adjustable side guides- horizontal and vertical work possible- freely movable control panel- pressure gauge / pressure display for the rollers- CE mark / decl ...

I-beam section - upend: 120 x 25 (d 1600) mmbar material dia. max.: 140 x 3 (d 3000) mmL-beam: 100x100x10 (d 1600) mmsquare material: 140 x 40 x 3 (d 4000) mmI - beam section - flat steel: 200 x 35 (d 1000) mmbar material - diameter: 70,0 (d 800) mmtool taper: 100,0 mm0: 315 mmturning speeds: 5,4 m/min.total power requirement: 11,0 kWweight: 2.240 kgrange L-W-H: 1500 x 1650 x 2100 mmFurnishing:- electro-hydraulic ring/profile bending machine- Hydraulic lower/side roller adjustment for extra small bending radii- Lower/side roller can be delivered individually- 3x powered rollers- divided roller segments- Digital position display of the bottom/side rollers Display with TouchScree function- hardened tool holder (42CrMo4)- Machine base- 2x hydraulically adjustable side guides- Horizontal and vertical work possible- freely movable control panel- Pressure gauge / pressure indicator for the rol ...

table width: 3000 mmtable length: 1500 mmburner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERTwith extraction system PFC-4 Plus 4kW F3800Technical dataHYPERTHERM Powermax 125 plasma cutting unit:Cutting capacity:Recommended: 38mmMaximum: 44mmSeparating cut: 57mmPiercing: 25mmOutput current: 30-125AMains connection: 400v-36ACompressed air requirement: 260l/minAir pressure 5.9barDimensions: 592 x 274 x 508 mmWeight: 49kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

plate thickness: 6,0 mm STplate thickness: 4,0 mm VAtable-size: 780 x 1000 mmblade length: 200 x 200 mmstrokes per minute: 60 minengine output: 3 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: 1400 x 800 x 1300 mmFeatures:- Electro-hydraulic notching machine- 3x locking precision stop- Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels- Electric stroke adjustment via digital display- Replacement blade (used)- Machine light- Side cut material ejection- Freely movable foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kg current new price approx. 3,000 euros special price on requestProduct description:- For processing cylindrical workpieces- Flat frame- Swivel castors with polyurethane coating- Clearly arranged operating elements- Infinitely variable speed- The control electronics are protected by a robust and. enclosed housing- With foot switch for start/stop- Drive with DC electric motors and gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.