Bancos de soldadura (166)

Auction-ID: A7-48486-116

Auction-ID: A7-48486-163

Auction-ID: A7-48486-8

Auction-ID: A7-48486-131

Auction-ID: A7-48486-121

Auction-ID: A7-48486-197

Auction-ID: A7-48486-96

Auction-ID: A7-48486-128

Auction-ID: A7-48486-43

Auction-ID: A7-48486-180

Auction-ID: A7-48486-175

Auction-ID: A7-48486-51

Auction-ID: A7-48486-135

Auction-ID: A7-48486-189

Auction-ID: A7-48486-198

Auction-ID: A7-48486-97

Auction-ID: A7-48486-88

Auction-ID: A7-48486-151

Auction-ID: A7-48486-118

Auction-ID: A7-48486-67

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 416 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2486 : prompt, Zwischenverkauf v : 545 €: 1 : 28 mmTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1100 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 449 €: 16 mmTool trolley for accessories 16mm system, mobileTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 1725 €: 1485 €: 16 mmThe extended entry level with added value in the set configuration for the most common work steps and applications.Consisting of:8 screw clamps 180° HIS16Z30002 screw clamps 45° HIS16Z30452 V-support HIS16VP1004 stop brackets 90x37, 5mm HIS16WA90376 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3002 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11520 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 929 €: 16 mmStarter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment.Consisting of:4 pieces screw clamp 180° HIS16Z30004 pieces stop bracket 90x37.5mm HIS16WA90374 pieces stop bracket 90x90mm HIS16WA90904 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: ? mmtable width: ? mmtable height: ? mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 3,51,61,5 mSet of welding stations (6 pieces) + suction unitShipping - Dimensions:6 welding tables 3 Euro palletsExtraction unit approx. 1.6 x 0.8 x 1.5 m on Euro palletTotal weight estimated approx. 750 kg.6 welding stations / tables + suction unitDrive: 1.2Extraction with 1.78 m³ / sThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4862 €: 3000 x 1500 mm: 3000 kg: 755 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,3000 x 1500 x 200 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,6 t: -- mm: -- mmconsisting of:30x article no. 2-280510Quick release pin short- Clamping of 2 components- burnished- with twist lock8x article no. 2-280410.NUniversal stop 150 L - nitrided- nitrided- as standard with fine scaling on both sides4x article no. 2-280420.NUniversal stop 225 L - nitrided- nitrided- as standard with fine scaling on both sides8x article no. 2-280110.GStop and clamping angle 175 L - cast / black oxide finish- Hole / elongated hole- Cast / burnished2x article no. 2-280162.NStop and clamping angle 500 G - nitrided- Left stop- nitrided1x article no. 2-280166.NStop and clamping angle 750 G left - nitrided- Left stop- nitrided 1x article no. 2-280167.NStop and clamping angle 750 G right - nitrided- stop on the right- nitrided1x article no. 2-280910Tool trolley- painted- Permissible total weight 240 kg1x article no. 2-280164.NStop and clamping angle 500 G with turn ...

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: ? mmtable width: ? mmtable height: ? mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 3,51,61,5 mSet of welding stations (6 pieces) + suction unitShipping - Dimensions:6 welding tables 3 Euro palletsExtraction unit approx. 1.6 x 0.8 x 1.5 m on Euro palletTotal weight estimated approx. 750 kg.6 welding stations / tables + suction unitDrive: 1.2Extraction with 1.78 m³ / sThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 1190 €: 1000 x 1000 mm: 850 mm: 210 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capa ...

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 2000 mmtable height: 200 mmbore: 28 mmweight: 1299 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.