Curvadoras de tubos (65)

tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro del tubo: 273 mmresistencia de la pared: 15,1 mmradio de curvatura mín.: 150 mmradio de curvatura máx.: 1250 mmpotencia total: 30 kWpeso de la máquina aprox.: 3,5 tdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Gasleiding: 50 x 3,91 mm Stalen Buis: 60 x 3 mm Características de la unidad: 60 x 2 mm Caja Koper/Alu: 64 x 4 mm Altura del maquillaje: 35 mm Altura del majestad del majín: 60 x 10 mm Vlakke Staaf (duro): 60 x 16 mm Platte Staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm Longitud máxima: 200 mm Buigsnelheid: 1,25 amperios; 2,5 rpm video klik hierLongitud: 900 mm Profundidad: 400 mm Altura: 1100 mm Peso: 140 kg

tube diameter: 48,3 mmwall strength: 3,25 mmbending radius min.: max. 180 mmBending speed: 20 °/sectotal power requirement: 2,4 kWweight of the machine ca.: 700 tdimensions of the machine ca.: 3880 x 800 x 1250 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 60.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 64.0 mm CU/Aluwall strength: 4.0 mmrevolutions per minute: 1.25 - 2.50 U/minbar material - diameter: 35.0 mmvoltage: 400 VoltControl: ISITAN NC total power requirement: 2.0 kWweight: 140 kgrange L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 60.0 x 3.0 mm- Gas tube capacity: 2 Gas x 3.91 mm- Square profile capacity (FE 42) 60 x 30 x 4.0 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasEquipment:- ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each- Patented quick tool change system- Continuously adjustable bending speed- One bending speed- 1 free-floating foot switch- 1 bending tool set included Additional segments available upon reque ...

tube diameter: 10.0 - 42.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 54.0 mm CU/Aluwall strength: 2.0 mmbar material - diameter: 30.0 mmrevolutions per minute: 1.30 U/minvoltage: 400 Volttotal power requirement: 1.5 kWweight: 110 kgrange L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 42.0 x 3.56 mm- Gas tube capacity: 1 1/4 Gas x 3.5 mm- Square profile capacity (FE 42) 40 x 20 x 2.6 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasFeatures:- Patented quick tool change system- One bending speed- Digital machine display- 1x freely movable foot switch- 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holderThe data for this ad was created with ModulMWS - the software solution of Log ...

tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 1/2 - 2.0 Zollwall strength: 2.75 - 4.5 mm STpressure: 10.0 tweight of the machine ca.: 46.0 kgWith a hinged bending frame for efficient work- Various bending dies included- Universally applicable for gas, boiler, and water pipes- Fast work thanks to rapid feed- With a tripod stand for safe work- Also ideal for copper and coated pipes- Bends up to 90° can be createdFeatures:- Bending dies: ½ - ¾ - 1 - 1 ¼ - 1 ½ - 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro del tubo: ? Resistencia de la pared de mm: ? mmradio de curvatura mín.: ? mmDiámetro del rollo: div. aprox. 100 - 240 mmDiámetro del rollo - diámetro: 60 mmPeso del envío: 950 kgEmbalaje: 1,20,80,6 mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro del tubo: 12-54 mm (Kupfer / Edels. mmnúmero de serie: EBD 022 99 002 modo de funcionamiento: Schneiden/ Entgraden / Re velocidad: Rollen 450 U/min m/min

Diámetro del tubo: bis 60 mmPeso de la máquina aprox.: 1,8 t

tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mmroll diameter: 315 mmbending speed: 5 m/minbending capacity - flat iron: max. 12 x 20 mm: 75 mmDrive: 11 kWweight: 2.600 kgrange L-W-H: 1950x1600x2100 mmEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm: 60x3 mm: 35 mm: 64x4 mm: max. 210 °: R10-R300 bending speed: 1,25/2,5 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 595x363x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm: 110 mmbending speed: 1-5 m/minBending capacity: 157 Wcm³total power requirement: 7,5 kWweight of the machine ca.: 2950 kgDomestic equipments:- Direct drive of all three shafts- Single delivery of the side rollers- Horizontally and vertically usable- Hydraulically movable side rectifier (via control panel)- 2 digital displays for the feed rollers- Hardened rollers- Mobile control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.