accesorios para máquinas herramientas usadas para la venta (2,429)

power capacity: 7,5 kWfeed pressure: 10 barweight of the machine ca.: 300 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine vice: CEKABA A12 thickness of jaw: 120 mmweight of the machine ca.: 14 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 51 mmWheel width: 125 mmweight: 20 kgheight adjustment: 560-975 mmFurnishing:- Heavy three-sprue design for maximum loads- Roller support steplessly height adjustable and clampable- Safe workpiece support- Solid and heavy-duty galvanized steel rollers- With two rollers, each 125 mm long, ideal for pipes, ...techn. Data :Roll width 2 x 125 mmRoll diameter 51 mmHeight adjustment 560 - 975 mmLoad capacity, max. 700 kgStandpipe diameter 74/52 mmWeight approx. 20 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: SPANNFIX : 5 height: 350 mmthroat: 250 mmweight: 8 kg: : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: KOLB A30 length: 300 mmtool adaptor: mit SK40 und SK50 Fuß : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 221 mmlength in total: 1.000 mmweight of the machine ca.: 300 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1.400 mmplate depth: 1.600 mmplate height: 310 mmweight of the machine ca.: jeweils 2,5 t2 available: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 600 mmwidth: 400 mmheight: 100 mmweight of the machine ca.: 200 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 500 kgnumber of suction cups: 6 suction cup dia.: 215 mmVacuum lifter VH 6-500for the horizontal transport of smooth, dry and airtight panels.Robust supporting structure made of steel, painted in RAL 2000 with lowOwn weight.consisting of:- 1x galvanized longitudinal beam with a length of 2,400 mm- 3x galvanized crossbeams with a length of 1,000 mm- 6x Springy, articulating and adjustable suction cup holders- 6x suction cups Ø 215 mm, the seal can be separated in case of wearwhose metal supports can be changed inexpensively and without tools- 6x ball valves to switch off individual suction cups, thus also smaller formatscan be lifted without having to move suction cups or traverses.- 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable withCEE plug and coupling. is routed to the lifting device next to the load cha ...

carrying capacity: 1000 kgnumber of suction cups: 8 suction cup dia.: 280 mmVacuum lifter VH 8-1000for the horizontal transport of smooth, dry and airtight panels.Robust supporting structure made of steel, painted in RAL 2000 with lowOwn weight.consisting of:- 1x galvanized longitudinal beam with a length of 2,400 mm- 4x galvanized crossbeams with a length of 1,000 mm- 8x Springy, articulated and adjustable suction cup holders- 8x suction cups Ø 280 mm, in case of wear the seal can be separatedwhose metal supports can be changed inexpensively and without tools- 8x ball valves to switch off individual suction cups, thus also smaller formatscan be lifted without having to move suction cups or traverses.- 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable withCEE plug and coupling. is routed to the lifting device next to the load ch ...

width: 500 mmheight: 300 mmdepth: 570 mmCNC-Table Attachment FrameProducer: KOCELType: 2755YOM: newWidth: 500 mmDepth: 570 mmHeight: 300 mmWeight: ca. 9 kgNumber of CNC-tool holder slots: 16Colour: RAL 5015 blueAdditional information:- Patented, innovative universal-plug-in system:- Size adjustment of the tool holder slots as required - So again and again possibility of newly arranged storage of 16 tool holders in this table attachment frame- Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40, HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly plug-in system, inconvenient and inflexible storage of different tool holders are a thing of the past.• The frame is a solid steel-sheet metal construction and was welded firmlyNo Tool Holders included!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

condition: gut sold only together as package: ja Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0 mmplate thickness: 0 mmplate length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Descripción general Conjunto de cabezas de corte láser TRUMPF (Schneideinheit) para sistemas de corte láser CO₂. La unidad está diseñada como cabezal de corte de reemplazo para las máquinas TRUMPF TruMatic/TruLaser equipadas con resonadores láser TruFlow. El conjunto incluye la unidad de autoenfoque, el sistema de detección de altura, las conexiones de gas y las interfaces eléctricas. Detalles técnicos Fabricante: TRUMPF Componente: Cabeza de corte láser (Schneideinheit) Material nº: 2014986 Número de serie: Parcialmente visible Compatible con sistemas láser CO₂ TRUMPF Accionamiento de enfoque automático integrado Unidad de detección de altura Conexiones neumáticas y eléctricas Condición: Usada Estado Montaje completo suministrado en el embalaje protector original. Los conectores y la carcasa parecen intactos con un desgaste estético mínimo. No se han probado e ...

max. load: . kg0: . 0weight: . kgThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morehe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIfthan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours arepossible by appointment. We look forward to your visit.You ...

Diámetro del material de la barra: 5 - 80 mm Longitud de la barra: 250 - 1,550 mm Longitud de la barra: 1,550 mm Alimentación longitudinal: 600 mm Ajuste de altura: 775 - 1,175 mm Dimensiones de la máquina aprox: 2,25 x 1,10 x 1,80 m Peso de la máquina aprox: 0,5 tAlimentador SAMSYS - Multisam MUS 2000- NO PROBADO - para piezas Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Auction-ID: A7-48268-21

Auction-ID: A7-48268-20

Auction-ID: A7-48268-29

Auction-ID: A7-48268-18

material: Marmor plate width: 2.500 mmplate depth: 700 mmplate height: 250 mmweight of the machine ca.: 2 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 500 mmplate depth: 800 mmplate height: 50 mmno. of flutes: 6 weight of the machine ca.: 140 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

filter unit: . .make: HYDAC type: FLND KS 400 DDF 50 C 1.2 /-B7operating pressure: max. 25 barReceiver: 2x 3,10 Lpump: make: GRUNDFOS type: MTR3-27/27 A-W-A-HUUV frequency: 50 HzPower: 2,20 kWturning speeds: 2.863 U/minHeadroom: 131 mHeadroom: max. 179 mfeed pressure: max. 25 barTemperature max.: 90 °C0: Counter-Clockwise (CCW) dimensions of the machine ca.: 0,6 x 0,6 x 1,2 mHigh-pressure Cooling Retrofit / Conversion Kit for NLX MachinesFilter Pump Combination 15 barGRUNDFOS / HYDAC- NEW and in original packagingconsisting of:- HYDAC filter unit 15 bar- GRUNDFOS pump 15 bar- Electrical component kit- pre-assembledThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rango L-W-H: 960 x 460 x 860 mmPeso: 75 kg: 8 St. Carrete de herramientas llenoContenido y equipamiento ver imágenesLos datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

liter capacity: 600 lPressure of pump: 8 / 20 barcontrol: Schütze / Contactorstotal power requirement: 7,2 KVAweight of the machine ca.: 450 kgdimensions of the machine ca.: 1,8 x 1,5 x 1,9 mCoolant SystemBMF - BFU 600 8/20 -13- from CTX beta 800 V4- universally applicable- controllable via contactors- Includes paper belt filter- Number of pumps: 2- Pump capacity: 0.75 kW, 2,880 rpm, Q: 2 m³/h, H: 65.2 m, T: 90°C max. 4.0 kW, 2,930 rpm, Q: 4 m³/h, H: 177.7 m, T: 90°C max.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley with 8 drawers, all with tools.- The pull-out drawers are all ball-bearing.- The entire workshop trolley is lockable.- The workshop trolley has 4 stable castors, 2 steerable andlockable.- The tools included are made of chrome vanadium steel.- The workshop trolley has 4 stable castors, 2 steerable, 2lockable, which ensure very comfortable rolling. On thetool trolley there is a stable worktop made of polypropyleneplastic.- The tools included in the workshop trolley are made of chrome vanadium steel andare stored in Styrofoam/foam inserts.+ Drawer 1:- 1/4 inch:13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mmRatchet, universal joint, extension.- 3/8 inch:10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mmRatchet, universal joint, extension.- 1/2 inch:17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mmRatchet, univers ...

Taper de herramientas: Número CAT 40: 67 st. / PCS. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Anchura de la placa: 2500 mm. Profundidad de la placa: 4000 mm. Altura de la placa: 345 mmNo. de flautas: 11 : 2 peso de la máquina aprox.: 7000 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

table length: 3200 mmtable width: 2000 mmtable height: 160 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.