máquinas de bebidas usadas para la venta (2,157)

Depósito de almacenamiento de acero inoxidable, de pie vertical. Título adicional: tanque vertical, Volumen: 141 hl, Presión de funcionamiento: 0 bar, Temperatura de funcionamiento: 20 °C, Ancho: aprox. 2,8 m, Altura: aprox. 2,8 m

This flash pasteurization system is used to stabilize beverage quality through gentle pasteurization. The product is heated to pasteurization temperature via a plate heat exchanger for a defined period of time and then cooled in a controlled manner. The system consists of: - Tube heat exchanger with hot water buffer tank for supplying hot water -Plate heat exchanger for flash pasteurization of the product This combination ensures reliable, uniform heating to guarantee long-term product quality. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Capacity: 350 hl/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1 x plate heat exchanger, 1 x tube heat exchanger, 1 x hot water pump, 2 x beer pump

Capacidad de llenado del llenador de botellas de línea: 15000 b/h botellas de 0,5 l, capacidad del mezclador correspondiente, Características: Bomba dosificadora como bomba de émbolo (Bran & Lübbe, yp DMS-G, 30 (diámetro) x 60 mm de carrera, 326 l/h 0,5 atü), 4 entradas (NW 25, NW 50, NW 15 y NW 32)

Título adicional: manipulación de materias primas, Características: Recepción de malte, limpieza de malta: eliminación de polvo, despedredor, vibrador, almacenamiento: 4 maltsilos (3 x 25 t, 1 x 6 t), garras de tornillo para malte (recepción), escamas de malta (retirada), acondicionamiento, molino de 6 rodillos, cuerpo de molienda

Título adicional: tanques verticales y cónicos de acero inoxidable, Capacidad: 3000 l/tanque, Ancho: 1,55 m, Altura: 3 m, Peso: 600 kg, Material: V4A de acero inoxidable, Características: 2 tanques cónicos de acero inoxidable, aislados, calefactables por vapor

Título adicional: depósito vertical, Capacidad: 4969 l, Presión de funcionamiento: 2 atm, Ancho: 1,8 m, Altura: 2,5 m, Peso: 300 kg, Material: Acero inoxidable 1,4541, Posición: vertical, Construcción base: 4 x pies de tubería, Características: Hombre; válvula de seguridad; Tubería CIP

Tanque móvil con revestimiento de madera para dispensar cerveza. Cristal de visión y paso de hombre; Volumen: 29 hl, Título adicional: Tanque dispensador, Capacidad: 29 hl, Presión de funcionamiento: 3 bar, Temperatura de funcionamiento: 20 °C, Longitud: 2200 mm, Ancho: 2000 mm, Altura: 2200 mm, Peso: 300 kg, Material: Acero inoxidable 1.4301, madera, Posición: horizontal, Construcción de base: Bastidor, Características: Revestimiento de madera; cristal de visión; Manway; Aislamiento 100 mm

El empaquetador y desempaquetador de botellas VP 800 está diseñado para su funcionamiento automático dentro de la industria de bebidas. Título adicional: Empaquetador de conjunto lineal, Capacidad: 600 cajas/h 10 carreras/min., Potencia: 5,5 kW, Corriente: 10 A, Voltaje: 400 V, Frecuencia: 50 Hz, Longitud: 3000 mm, Ancho: 1540 mm, Altura: 2600 mm, Peso: 1100 kg, Formatos: 24 x 0,33 L Vichy, Dirección de marcha: derecha-izquierda, Funcionamiento / Control: Simatic S7-99, Construcción de la base: Chasis, ajustable en altura, Características: aproximadamente 3 m de salida de botella; aprox. entrada de caja de 5,5 m; Salida de caja de aproximadamente 4,5 m

Máquina de etiquetado Krones Prontomatic Tipo 12-6/6-4, año de fabricación 1994 - reacondicionada, Capacidad: 13500 bph Etiqueta de tapa oscilante, Voltaje: 400 V, Frecuencia: 50 Hz, Longitud: 2450 mm, Ancho: 2000 mm, Altura: 2500 mm, Formatos: Tapa corona retornables: 0,33l, 0,5l NRW; Corona de Corona unidirectional: 0,33L; Tapa girante: 0,5L, 0,58L, Partición de máquina: 180mm, Dirección de marcha: Derecha - izquierda, Operación / Control: Simatic S7-300

This crate washing system from Paxona AG is designed for the efficient cleaning of beverage crates and has a capacity of around 500 crates per hour. The system has two crate turners and several spray nozzles to ensure thorough and reliable cleaning. Measuring 4.4 m × 1.4 m × 2 m and weighing 700 kg, it is robustly built and can be easily integrated into existing production lines. Its practical design ensures consistent performance and easy operation in breweries and beverage factories. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: box spraying, Capacity approx.: 500 Crates/h, Length: 4,4 m, Width: 1,4 m, Height: 2 m, Weight: 700 kg, Features: 2 x crate turner; spray jets

Línea semiautomática de llenado de 5l para barriles de fiesta, que incluye rellenador, tapador, transportadores, lavadora y torneador de 6 cabezas, título adicional: semiautomática, Capacidad: 240 cph, Potencia: 0,3 kW, Corriente: 1,85 A, Voltaje: 400 V, Frecuencia: 50 Hz, Aire comprimido: 3,2 cbm/h a 6 bar, Longitud: 5000 mm, Ancho: 3000 mm, Altura: 2300 mm, Operación / Control: SPS S7-200, Características: Lavadora y tornera de la unidad de transporte semiautomática de un solo punto

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft Delta FW 10 rejection unit for precise and reliable removal of non-compliant bottles. With a capacity of up to 40,000 bottles per hour, it enables efficient quality control in high-speed production lines. The device has a compact footprint of 0.44 m × 0.80 m × 2.24 m and weighs 150 kg, making it easy to integrate into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Heuft Spectrum TX, Capacity: 40000 bottles/h, Length: 0,44 m, Width: 0,80 m, Height: 2,24 m, Weight: 150 kg, Features: Heuft ejection unit Delta FW 10

This mixing plant from Albert Handtmann Holding GmbH & Co. KG / Esau and Hueber is designed for the precise and efficient mixing of liquids. The plant is equipped with four mixing lanterns and a control cabinet mounted on the frame, with components from Siemens ensuring reliable operation. The system is mounted on four wheels, making it mobile and easy to integrate into existing production lines. Thanks to its robust construction and user-friendly design, it is ideal for breweries and beverage manufacturers who require consistent and accurate mixing. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 4 blending lanterns, Operation / Control: Siemens parts, Base construction: on 4 wheels, Features: 4 blending lanterns, control cabinet mounted on the frame

This PARAMIX system is used to produce high- and low-carbonated beverages. The process comprises the following steps: 1. Degassing of the water, 2. Dosing and mixing of water and syrup, 3. Carbonation of the finished mixture. The system was retrofitted by FAMIX in 2009 and expanded to include the following components: - CO₂ impregnation unit - CO₂ pressure-temperature ratio regulator type BMS7 The regulator, including the control cabinet, is to be completely renewed again when the device is purchased. The system is ideal for the reliable and flexible production of a wide variety of soft drinks. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: mixing unit 1983 - 2010, Capacity approx.: 150 hl/h Mixing and carbonating, Length: 2,9 m, Width: 2,5 m, Height: 2,5 m, Weight: 3000 kg, Operation / Control: mix ...

Título adicional: tanques de acero inoxidable con control de temperatura, Capacidad total (bruta): 904 hl, Material: acero inoxidable, Características: 3 tanques de fermentación (1 x 554 hl, 2 x 175 hl), 1 tanque de levadura (37 hl), control de temperatura propio (Nerb)

Water treatment system consisting of: cation exchanger, reverse osmosis system, and pressure booster station, Additional title: Reverse osmosis system with cation exchanger and pressure booster station, Permeate capacity: 1 m³/h, Max. permissible pressure: 6 bar, Yield: 75 %, Salt retention: 98 %, Power: HD-pump 1,5 kW, 3,15 A, Frequency: 50 Hz, Length: approx. 2294 mm, Width: approx. 740 mm, Height: approx. 1220 mm, Weight: 200 kg, Features: Conductivity meter, fine filter, overpressure protection, high pressure pump, control unit, pressure booster station 2 salt dissolving and storage containers, 2 filter containers with nozzle rod and lower nozzle, central control valve with upper nozzle, control unit

This filter system may only be used to filter preclarified products that have normal filterable properties in their composition., Max. filtration flow: 400 hl/h continuous, Permissible operating pressure: 6 bar, Permissible operating temperature: 105 °C, Volume: 1456 l, Current: 10 A, Voltage: 220 V, Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h, Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar, Weight: 3450 kg, Base construction: basic frame with control and measuring components and filter container; cleaning module, Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles ...

System for the pressureless production of aqueous chlorine dioxide solution This system enables the pressureless production of an aqueous chlorine dioxide solution. The two starting materials are fed into a reaction vessel one after the other via peristaltic pumps. The liquid level in the vessel is monitored by a level probe, ensuring a correct mixing ratio of 1:1. The operating time of the peristaltic pumps is also monitored and controlled by the software to ensure precise dosing. After the reaction time, the resulting chlorine dioxide solution is rinsed with water in the storage tank and then dosed to the point of use using a diaphragm dosing pump and a dosing valve. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, ...

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

Capacidad: 50.000 b/h, Formatos: 0,33 l LongNeck, 0,5 l Botellas NRW, etiquetas de cuello/pecho/cuerpo/traseros, palés europeos, Operación / Control: Siemens S5, Características: decoronador, descrater, lavadora de botellas, inspector de botellas vacías, llenador y cierre, inspección de altura llena, máquina de etiquetado, datación, inspección de etiquetas, inspección de corcho corona, inspección de cajas llenas, transportadores de botellas y cajas

This vertical conical fermentation tank (CCT) from Christian Gresser Behälter- und Anlagenbau GmbH is designed for controlled fermentation and storage and has a volume of 76 hl, an operating pressure of 0 bar, and an operating temperature of 20 °C. The stainless steel tank with a conical bottom is equipped with cooling zones (glycol, 0.9 bar; cone: 14 l, jacket: 34 l) and its own temperature control system, which enables precise temperature control during the process. Other features include a manhole cover, a DN65 outlet, a pressure gauge, a safety valve, a vacuum valve, a load cell, a DN25 spray pipe, a CIP line, a ladder rod, and lifting eyes, making it a fully functional solution for professional beverage production operations Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Yeast tank with temperature control, Volume: 76 hl, Operating pressure: ...

This vertical stainless steel tank from Christian Gresser Behälter- und Anlagenbau GmbH is designed for the efficient storage and processing of liquids, has a volume of 11 hl and an operating temperature of up to 50 °C. The tank has an insulated base construction and is equipped with a cartridge heater, a level indicator (hose), a sampling tap, a manhole opening with cover, an overflow, and two outlets with manual valve flaps, making it extremely versatile for various process applications. It has a width of 1 m, a height of 2.6 m, and a weight of 350 kg. Our team at VBW Asset Trade will be happy to answer your questions., Volume: 11 hl, Operating temperature: 50 °C, Power: 25 kW, Voltage: 400 V 3~, Width: 1 m, Height: 2,6 m, Weight: 350 kg, Material: stainless steel, Position: vertical, Base construction: insulated, Features: cartridge radiator, level indicator (hose), sampling tap, m ...

This vertical tank from König und Günther is a robust and reliable solution for storing liquids in breweries or beverage production facilities. With a capacity of 50 hl, it is designed for optimal use of space in a vertical position. The tank has a stable construction on three feet, a width of 1.5 m, a height of 3.7 m, and a weight of 300 kg. Its solid construction ensures safe and long-lasting operation and makes it suitable for a wide range of process applications. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: vertical tank, Capacity: 50 hl, Width: 1.5 m, Height: 3.7 m, Weight: 300 kg, Position: vertical, Base construction: on 3 feet

Título adicional: recipiente de cerveza de acero inoxidable, Volumen total: 300 hl, Superficie aprox.: 15 m², Carga específica de fondo falso: 165 kg/m², Altura del bastidor: 2 m, Material: Acero inoxidable, Características: Soportes de salida de ventilación, cúpula de entrada (DN600), cristales de inspección (DN600), luz de advertencia CIP, interruptor de seguridad en la puerta, conjunto de iluminación interior (IP54)

Título adicional: extracción de trub, Capacidad: 182 hl, Volumen neto: 150 hl, Volumen bruto: 182 hl, Material: 1.4301, Posición: exterior, Características: aislamiento (lana mineral de 100 mm)

Servicio de etiquetado de Estrasburgo SES-120-II Hotmelt para recipientes cuadrados y redondos, configurado para botellas de bolsillo de 0,1 litros, 0,25 litros y 0,5 litros, etc., para recipientes cuadrados con 2 etiquetas o para recipientes redondos con una sola etiqueta, producción de hasta 4.000 unidades por hora, trabajado hasta el final... Solo corría 10 veces al año

Título adicional: y. o. c.: mayormente de 2003, mosto acabado: 150 hl, grano: 2500 kg, Corriente: corriente trifásica de corriente alterna, voltaje: 400 V, Frecuencia: 50 Hz, Características: lauter tun, sistema de mosto de baja presión con cobre-remolino de mosto con sistema externo de ebuvición de mosto, remolino adicional, unidad de recogida de trub, dosificación de lúpulo, Periferia: calentador de mosto lauter, condensador de vapor

This coding machine from Videojet Technologies GmbH is a powerful thermal transfer printer designed for reliable and precise product marking in packaging lines. With a capacity of up to 150 packages per minute, it is ideal for high-speed production environments. The machine is operated via the intuitive CLARiTY control system with a single monitor, ensuring simple and user-friendly handling. The device is mounted on a height-adjustable mobile carrier with feet and wheels, allowing it to be flexibly integrated into existing lines. Thanks to its modern design and robust construction, this machine offers a reliable and efficient solution for printing data, batch numbers, and product information. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Thermal transfer printer, Capacity: 150 packs/min , Current: 1,86 - 3,85 A, Voltage: 100 - 240 V, Frequency: 50 ...

A complete - with a production capacity of approx. brew is for sale. The brewhouse comprises a mash tun, mash kettle, lauter tun, and wort kettle. The system was modernized and rebuilt several times between 1990 and 2001, resulting in a combination of traditional copper construction and modernized stainless steel components. The brewing vessels are robust and efficient in design: the mash tun and lauter tun are made of copper, and the wort kettle also has a copper core with stainless steel inner lining and an integrated inner boiler. The mash tun is made of stainless steel (1977). The equipment also includes a pan vapor condenser, wort cooling, plate cooler, and peripherals such as a spindle station, wort pumps, drain pump, and hot water tank. The CIP system allows for convenient cleaning of the wort kettle, including two 20 hl containers for lye and acid; the remaining vessels can ...