mandrinadoras y centros de mecanizado usadas para la venta (3,214)

Auction-ID: A1-41281-313

Auction-ID: A1-41281-213

Auction-ID: A1-41281-211

Centro de roscado / mecanizado CNC Brother TC-S2D-O Fabricante: Brother Industries, Ltd. Modelo: TC-S2D-O Año: 2010 Número de serie: 113796 CNC: Hermano CNC-B00 Husillo: 16.000 rpm Capacidad de herramienta: 21 Centro de mecanizado CNC vertical compacto y de alta velocidad para operaciones de taladrado, roscado y fresado. Especificaciones: Viaje de X/Y/Z: 500 / 400 / 300 mm Tabla: 600 × 400 mm Carga máxima de la mesa: 250 kg Motor de husillo: 4,9 kW Interfaz de herramienta: MAS-BT30 / BBT30 Herramienta máxima: Ø80 × 250 mm, 3 kg Tiempo ATC: aprox. 0,9 seg Travesía rápida: 50.000 mm/min Repetibilidad: ±0,003 mm Alimentación: 220 V, trifásico, 50/60 Hz Capacidad de potencia: 9,5 kVA continua / 29,4 kVA máx. Aire: 0,4–0,6 MPa, aprox. 120 L/min Datos operativos: Tiempo de operación: aprox. 14.113 h Tiempo de encendido: aprox. 52.768 h Dimensiones (L × Ve × H): 1.624 ×  ...

bore capacity in steel (diameter): 32 (St 60) mmarm length: 418 / 1018 mmworkpiece height max.: ca. 400 mmtable surface area: 1200 x 500 mmspindle taper MT: 4 quill stroke: 190 mmdistance table - lower edge spindle: 260 - 660 mmtable height over floor: 800 mmspindle turning speed range: 41 - 1800 U/minfeeds: 0,1 / 0,15 / 0,2 / 0,3 mm/Utotal power requirement: 6 kWweight of the machine ca.: 1,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mmx-travel: 1000 mmy-travel: 700 mmz-travel: 300 mmcross rail adjustment - vertical: 780 mmdistance between table/spindle: 1000 mmtable surface area: 1100 x 842 mmdistance between columns: 1100 mmtable load: 1500 kgtool taper: SK 45 spindle turning speed range: 2400 U/minspindle drive: 5,9 kWfeed range: 1 - 6000 mm/minweight of the machine ca.: 10,6 tdimensions of the machine ca.: mRetrofit / overhauling in May 2005 (with geometric measurement):- New Heidenhain iTNC-530 control- New electronics- New Siemens servomotors- Heidenhain glass scales- Revision of drilling spindle unit(total costs 118,436.00 EUR)Equipment:Infrared measuring probe m&h 38.10-MINIElectron. HandwheelVarious tool holdersTransport dimensions:- Machine (LxWxH) 3500 x 2600 x 2750 mm- Control cabinet (LxWxH) 2300 x 600 x 2300 mm- Hydraulic (LxWxH) 800 x 600 x 1000 mmThe data for this ad was create ...

Con mecanismo de accionamiento mecánico. Fuente de alimentación de 230 V, caja de control con botón de parada de emergencia e interruptores. Auction-ID: A1-51273-15

Auction-ID: A1-40407-98

Auction-ID: A1-40407-80

Auction-ID: A1-40407-76

Auction-ID: A1-47368-3502

x-travel: 1.350 mmy-travel: 1.150 mmz-travel: 895 mma-axis: +16/-120 °c-axis: 360 °number of spindle speeds: 24.000 U/min/rpmtool adaptor: HSK-A63 spindle drive: NEW 34 kWtable diameter: 1.100 mmtable weight: 1.600 KgTools changer: 46 fach/toolstotal power requirement: kWweight of the machine ca.: 19 tdimensions of the machine ca.: 4.590 x 6.990 x 3.150 mm3-position pallet changer with 1,000 × 840 mm tableRENISHAW OMP60 workpiece probeLaser tool measurement systemAPS – Advanced Process SystemAPS ExtendedITS – Intelligent Thermal ControlKinematic optionsChip conveyor with TSC (Through-Spindle Coolant)Compressed air supply through the spindleMinimum quantity lubrication (MQL) using oil mistThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante: FIL FRESATRICI (Italia ) Modelo: FCM Tipo: FCM 600 Número de serie: L1090 Año de fabricación: 2000 Controlador: Heidenhain TNC426 Tipo de máquina Categoría: Fresadora CNC Fresadora tipo cama / mesa móvil O centro de mecanizado de columna móvil Viajes X (longitudinal): 6000 mm Y (cruz): 600 mm Z (vertical): 1000 mm Husillo Reducción de la temperatura: ISO 50 Velocidad del husillo: 6000 rpm Potencia del motor: ~10 – 25 kW Auction-ID: A1-51153-71

bore depth: 1.200 mmboring range (diameter): 3 - 30 mmcontrol: SIEMENS - SPS S7-300 centre height: 250 mmturning speed range: 375 - 9.000 U/minDeephole Boring Machine | LOCH - TB2 9 1200The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TB2 |TB-2 | TB 2 9/1200The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.300 mmtravel -y axis: 670 mmtravel -z axis: 625 mmcontrol: HEIDENHAIN - TNC 620 number of spindle speeds: 12.000 U/mintool taper: SK 40 table dimension (L x W): 1.500 x 670 mmnumbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor.The machine only has 13.600 spindle hours.The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time.The machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DNM5700 | DNM-5700The data for this ad was created with ModulMWS - the software solution of Logo ...

x-travel: 700 mmy-travel: 550 mmz-travel: 500 mmcontrol: TNC 426 table-size: 900 x 550 mmtaper ISO: SK 40 speeds: 18000 U/mintotal power requirement: 50 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 3,3 x 2,43 x 2,98 mDECKEL MAHO DMC 70 V Hi-dyn machining centerfeaturing:30-station tool changerChip conveyorOil mist filtration systemTransport dimensions: 650 x 243 x 297 cm, 8 tonnesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 650 mmz-travel: 680 mmrotary table tiltable: 360 GradNumber of working hours: 55.000 htool taper: HSK 63 spindle turning speed range: 20.000 U/minmax. torque on the spindle: 85 table-size: 400 x 500 mmtable load: 0,5 t4-axis machineChain-type tool magazine: 60 positionsChip conveyorPallet changerCoolant filtration systemHigh-pressure coolant through the spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A3-46142-1302

Auction-ID: A3-46142-20701

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: max. 1500 vice: ja feed: ja m/mintool adaptor: MK 2 weight of the machine ca.: 140 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mmy-travel: 700 mmz-travel: 500 mmcontrol: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1060 mmy-travel: 520 mmz-travel: 610 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: 5900 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 820 mmz-travel: 700 mmcontrol: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 1230 mmworkpiece height max.: mmbore stroke: 180 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x2,3 mHigh-speed radial drilling machines with:- Feed mechanism- Thread-cutting attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: SIEMENS 840 D control: Powerline Shop Mill table surface area: ø 630 x 500 mmtable swivelling +/-: 110/5 Gradspindle taper: SK 40 spindle turning speed - stepless: 20 - 10.000 U/minspindle drive: 13 kWmax. torque on the spindle: 82 Nmfeed speeds: max. 20.000 mm/minrapid traverse: 24 m/minno. of tools in magazin: 30 wotkpiece diameter with 2 vacant positions: max. 130 mmtool length - max.: 290 mmweight of tools max.: 6 kgtotal power requirement: 17 kVAweight of the machine ca.: 4,05 tdimensions of machine L x W x H: 2,21 x 2,12 x 2,15 m= 5-axis machining center (5 axis simultaneously) with 2-axis NC swivelling rotary table- only 9.609 spindle hours -- the machine was used for sample and prototype production, 3D machine model for kinematic simulation in a CAM programming system (available in IGES and STEP formats) Accessories:  ...

x-travel: 1016 mmy-travel: 610 mmz-travel: 760 mmControl: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 9,4 tdimensions of the machine ca.: mHeidenhain iTNC 530 CNC controlTravel ranges:X-axis 1.016 mmY-axis 610 mmZ-axis 760 mmSpindle speed 10.000 rpmTool holder HSK 80Power 12 kWTable clamping surface 1.250 x 590 mmTable load 900 kgFeed rate 40.000 mm/min.Machine weight 9.400 kgEquipment:Heidenhain iTNC 530 CNC contouring controlElectronic handwheel3D touch probetool changer2-position pallet tableCoolant system with internal coolant supply (ICS)Chip conveyorOil mist extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35.0 / 40.0 mmthroat: 300 mmbore stroke: 180 mmturning speeds: 65 - 1750 U/mintable-size: 515 x 400 mmcolumn diameter: 155 mmspindle taper MT: 4 MKengine output: 0.9 / 1.3 kWweight: 450 kgrange L-W-H: 800 x 650 x 1850 mmFeatures:- Heavy-duty column drill press- Drive: VARIO V-belt Stepless speed adjustment - Manual spindle feed - Reversible motor- Clockwise rotation of the drill spindle - Adjustable fixed depth stop- Machine table with 2 T-slots Height-adjustable via hand crank- Machine light- Emergency stop button on the front- User manual (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35.0 / 40.0 mmthroat: 315 mmbore stroke: 180 mmturning speeds: 130 - 3500 U/mintable-size: 615 x 470 mmcolumn diameter: 155 mmfeed: 0.1 / 0.2 / 0.3 mm/Uspindle taper MT: 4 MKengine output: 2.0 / 2.4 kWweight: 450 kgrange L-W-H: 800 x 650 x 2100 mmFeatures:- Heavy-duty column drill press- With extended column (200 mm)- Drive: VARIO V-belt Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) with electromagnetic engagement - pole-changing motor- clockwise rotation of the drill spindle - adjustable fixed drill depth stop- Machine table with 2 T-slots Height-adjustable via hand crank- Machined base plate - Coolant system in the machine base - Machine light- Emergency stop button on the front- Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55.0 mmthroat: 300 mmbore stroke: 140 mmturning speeds: 70 - 2300 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmweight: 380 kgheight of the machine: ca. 1.850 mm Current list price: approx. 15,000 euros Special price available upon request Features:- Robust INDUSTRIE column drill press Drive: VARIO V-belt - Automatic spindle feed Feed mechanism: 0.1 + 0.3 mm/rev Feed overload protection - Stepless speed adjustment Includes digital speed display - Height-adjustable worktable with 2 T-slots- Right/left rotation of the work spindle - Emergency stop button on the front - User manual (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.