mandrinadoras y centros de mecanizado usadas para la venta (3,232)

x-travel:2300 mmy-travel:1200 mmz-travel:600 mmturning speeds:30-10.000 1/minmax. torque on the spindle:254 / 159 Nmcontrol:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos.spindle:40 / 25 kWfixed working table:surface area:1.100 x 1.100 mmrotary table:1.100 x 1.100 mmrapid traverse:30 m/mintotal power requirement:69 kVAweight of the machine ca.:20 tuniversal machining center with indexing head (2,5°),NC-rotary table, max. table load 1.500kg,internal coolant supply 30 bar, paper filter,el. handwheel,chipconveyor,automatic doors,flush gun,no touch probe available,approx. 81.400 h main swich onapprox. 72.200 h control onapprox. 26.700 h program running on machine under power , for functional testing

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:42.000 1/mintool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,laser,prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe),mode 4,oilmist suction,spindle chiller,no internal coolant supply,approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in totalmachine in good condition (test report available)

x-travel:1000 mmy-travel:610 mmz-travel:600 mmtable-size:1150 x 600 mmtable load capacity:1000 kgrapid traverse X- and Y-axis:24 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:10.000 1/minspindle drive:15/22,5 kWtool change unit:30 Pos.CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mmweight of the machine ca.:7 tdimensions of the machine ca.:3,2 x 2,2 x 2,7 mvertical machining center,- internal coolant supply 30 bar- chipconveyor- cartridge filter- flat tracks- el. handwheel- prepared for 4th axis- 3D touchprobe RENISHAW OMP 60- indirect measuring system- accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray)approx. 6.000h "spindle on"

Auction-ID: A1-43301-177

Auction-ID: A7-44325-520

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 18.500h "machine on", approx. 500h "spindle on"

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:12000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:40 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWweight:6,8 to.space requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply 20bar,airblast through spindle,direct measuring system,prepared for 3D-touchprobe (M&H PS 25.00),chioconveyorNC-dividing device LEHMANN EA 520 L MA (center height 180mm)approx. 26.000h "machine on", approx. 7.500h "spindle on"

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

x-travel:710 mmy-travel:630 mmz-travel:500 mmturning speed range - spindle:5 - 5000 1/minpower - main spindle:11 kWtool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/minsurface area:1200 x 600 mmtable load:0,5 ttotal power requirement:15 kVAweight of the machine ca.:4,24 tToolchanger with 44 tools, pendant handwheel for easy setup.

x-travel:2600 mmy-travel:1100 mmz-travel:900 mmtable surface area:3200 x 1100 mmrotary table diameter:1050 mmtable load:1,2 tcontrol:Heidenhain iTNC 530 ergoline 19" turning speeds:20 - 10.000 1/mintaper ISO:SK 50 max. torque on the spindle:288 / 187 Nmtool change unit:60 Pos.rapid traverse:40 m/minspindle:44 / 32 kWweight of the machine ca.:25 tdimensions of the machine ca.:6,70 x 3,40 x 2,95 m5-axis universal machining center,rigid table with integrated NC-rotary table left side and B-axis in milling head,direct measuring system,internal Coolant 40 bar, coolant tank 600 l,Swarf Conveyer Rotoclearairblast through spindle,3D Touch probe HEIDENHAIN TS 649,mode 4,new milling spindle in 2022 at 25.584happrox. 60.000 h machine ON, approx. 31.000 h Programm ON in total

Control: Heidenhain iTNC 530 Viajes Eje X: 980 mm - 880 mm usando el eje B Eje Y: 630 mm Eje Z: 630 mm Ejes rotatorios Eje B (cabeza de fresado giratoria NC) Alcance de giro: −120° / +30° Par giratorio: 2.200 Nm Par de mantenimiento: 1.950 Nm Sujeción hidráulica: 3.600 Nm Eje C (mesa rotatoria NC) Mesa giratoria de 360° Par máximo: 2.600 Nm Par de mantenimiento: 2.900 Nm Eje de rotación rápida de giro: 30 1/min Alimentación: 10.800 °/min Mesa de trabajo Mesa rotatoria NC integrada en la mesa Tamaño de la mesa: 1.250 × 700 mm Diámetro de la mesa giratoria: 700 mm Espaciado en 11 ranuras en T: 63 mm Carga máxima de la mesa 650 kg (centro de la mesa) Husillo Portaherramientas: SK40 DIN 69871 Velocidad del husillo hasta 10.000 min⁻¹ Rendimiento 30 kW (40% CC) 20 kW (100% ED) Par mo ...

x-travel:1400 mmy-travel:1200 mmz-travel:1350 mmcontrol:MSX- 701 Mapps III table surface area:800 x 800 mmrapid traverse:50 m/mintable rotating:360.000 x 0,001 B-Achse °table load:2,0 tnumbers of pallets:2 turning speed range:8000 1/minpower capacity - milling spindle:37 kWno. of tools in the magazine:60 Stücktool taper:HSK-A 100 weight:31 tdimensions:5,9 x 3,48 x 3,68 mEquipment:- Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping- storage 1 MB- Big Plus spindle - Knoll filter system- mechanical Oil dust collector- elect. hand wheel- renishaw - abso- scale i X/Y/Z- axis- 5 free m- funktions- 48 extra off sets- dual ballscrews on X/Y/Z- axis

x-travel:560 mmy-travel:560 mmz-travel:660 mmcontrol:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/minspindle drive:25/ 35 kWmax. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mmTool diameter with no neighbouring tools:170 mmtool length - max.:450 mmweight of tools max.:12 kgnumbers of pallets:2 Pallet dimension:400 x 400 mmmax. workpiece diameter:630 mmworkpiece height max.:900 mmtable load:400 kgrapid travel x/y/z:60 m/minFeed x/y/z:60 m/mininternal coolant system feed:70 barweight of the machine ca.:8,5 tdimensions:3200 x 4800 x 2900 mmRenishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar.The machine has just received a new milling spindle.

Auction-ID: A7-44480-25

x-travel:1530 mmy-travel:530 mmz-travel:465 mmside by side, right side fixed table X =:925 mmside by side left side 2 axis table X =:780 mmcontrol:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/minSpindle Torque:120 Nmpower capacity:22 kWFixed Table Dimensions:920 x 540 mmTable load fixed table:2000 kgMax. parts size on fixed table:900 x 500 x 400 mmDiameter of integrated 2-axis rotary table:650 mmTable load rotary table:500 kgB-axis swivel angle:-90°/+110° ° / degMax. parts size on rotary table:600 x 500 x 400 mmMax. Parts size over both tables:1500 x 500 x 400 mminternal coolant system feed:70 bar barweight of the machine ca.:10,5 tdimensions of the machine ca.:3,65 x 2,53 x 2,81 mpendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent con ...

Auction-ID: A7-44325-410

bore capacity in steel (diameter): 32 mmthroat: 350 mmbore stroke: 170 mmspindle turning speed range: 200 - 1200 U/minfeeds: 0,15 -1 mm/mintool taper: MK 4 thread - module: 30 mmtable surface area: 600 x 550 mmdistance ground floor - spindle: 1250 mmtotal power requirement: 1,5 / 2,2 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,1 x o,7 x 2,2 mpartly overhauled in 2014used in Repair Shop onlyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 6500 mmy-travel: 2000 mmz-travel: 900 mmW-axis (spindle longitudinal): 800 mmspindle motor: kWspindle turning speed range: 5 - 1000 U/mintotal power requirement: 30 kWweight of the machine ca.: 35,5 tdimensions of the machine ca.: - m- Spindle mount: SK 50- Table size: 1800 x 2000 mm,10t- Angle head- Faceplate with faceplate slide U: 320 mm,- Heidenhain digital Readout,- Counterholder- 2 plate fieldsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 6000 mmy-travel: 4000 mmz-travel: 1000 mmW-axis (spindle longitudinal): 800 mmtool taper: IS0 50 spindle turning speed - stepless: 10 - 2500 U/minspindle motor: 60 kWdimension of the ram: 450 x 450 mmfeeds: X,Y,Z,W = 1 - 8000 mm/minrapid traverse feeds: X + Y = 16000 mm/minrapid traverse: Z + W = 12000 mm/mincontrol: Heidenhain TNC 530 total power requirement: ca. 80 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC path control Heidenhain iTNC 530- Automatic universal milling head HUI 50 CNC (2.5°)- Faceplate LD 650 300-1000 mm, dia. 650 mm with U-axis- Automatic tool changer with 40 positions- 2 clamping plates 4020 x 1885 mm- Coolant system with filter system- Spindle internal cooling 10 bar- Rotary table SV 25, 2500 x 2000 mm (V-axis: 1800 mm)- Chip conveyor- 3D measuring probeThe data for this ad was created with ModulMW ...

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

x-travel:2500 mmy-travel:1000 mmz-travel:750 mmtable surface area:3220 x 1000 mmWorkpiece weight approx.:3000 kgspindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/minfeed speeds:1- 30000 mm/minrapid traverse:30 m/mintotal power requirement:40 kWdimensions of the machine ca.:6,9 x 4,1 x 3,7 mweight of the machine ca.:21 twith CNC HEIDENHAIN TNC 42630-pockets autom. toolchangerRENISHAW measuring probecoolant attachment with TSC and chip conveyordiverse toolholders

bore capacity in steel (diameter):80 mmarm length:2500 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):80 mm - throat (max):2500 mm - horizontal travel:2000 mm - vertical travel:1000 mm - sleeve stroke:450 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):16 /min - spindle revolutions (max):1250 /min - number of gears:16 - spindle diameter:104 mm - taper fixture : MK 6 :. - drive power (max):7.5 kW - max. distance spindle ... clamping surface:2000 mmELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3730 mm - space requirements width:1400 mm - total height:4025 mm - total weight approx.:11000 kgAttachments :- Angular Table 1000 x 800 x 800- Coolant DeviceDescription of condition :SHOWROOM MACHINE

x-travel:3000 mmy-travel:1000 mmz-travel:1200/1300 mmspindle motor:32 kWspindle taper: ISO:50 spindle turning speed range:20 - 8000 U/minfeed range:1-30000 mm/minrapid traverse feeds:30 m/mintotal power requirement:80 kW

spindle diameter:150 mmx-travel:10000 mmy-travel:2500 mmbore spindle stroke:700 mmram stroke:700 dimension of the ram:340 x 340 mmspindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min.feed speeds infinitely variable:1 - 5000 mm/minrapid traverse:5 m/mintotal power requirement:120 kWweight of the machine ca.:115 tdimensions of the machine ca.:15,1 x 10 x 6,4 mwith CNC SIEMENS 840 Dsl complete retrofit in 2010FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity,longitudinal movement 2500 mm,angular milling head 4 x 90°universal milling headfloor plate area ca. 12000 x 6000 mm ( 72 m²)chip conveyor and coolant attachmentaerostatic guideways

x-travel:600 mmy-travel:580 mmz-travel:580 mmnumbers of pallets:2 pallet size::400 x 400 mmmax. workpiece weight:400 kgspindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/minrapid speed:50 m/mintotal power requirement:25 kWweight of the machine ca.:12 tdimensions of the machine ca.:3,6 x 3,6 x 2,9 mwith CNC SEICOS 16 M ( FANUC base )autom. toolchanger 61-pocketspallet indexing 1°chip conveyor and coolant attachmentexhausterclamping cube and diverse toolholders

Centro de mecanizado CNC Fanuc Robodrill α-T21iD Tipo: Centro de mecanizado vertical (3+1 ejes) Fabricante: Fanuc Ltd., Yamanashi (Japón) Año de fabricación: 2003 Modelo: α-T21iD Recorridos de ejes (X/Y/Z): 500 / 400 / 330 mm Avances rápidos (X/Y/Z): máx. 54 m/min Velocidad del husillo: máx. 10.000 rpm Potencia eléctrica instalada: 10 kVA Tensión de alimentación: 200–220 V, 50/60 Hz, trifásica Capacidad máxima sobre la mesa: 250 kg (uniforme) Control CNC: Fanuc Series 16i-MB Tiempo total de corte mostrado: 1.448 h Funcionalidad no comprobada Auction-ID: A7-44326-30

Auction-ID: A1-43934-1

Auction-ID: A7-44032-534

Centro de mecanizado vertical CNC para mecanizado de piezas metálicas. Control numérico: Siemens Sinumerik 810DCarreras de línea eléctrica: X 640 mm / Y 600 mm / Z 500mm Mesa: 850 × 600mm Carga máxima en la mesa: 600kg Conicismo del husillo: SK 40 (DIN 69871) Velocidad del husillo: 1 – 8.000rpm Avances rápidos: X 70 m/min / Y 40 m/min / Z 40 m/minCambiador de herramientas: 30 posiciones Potencia del motor del husillo: 12 / 17 kWHoras energizadas: 43.000h Horas de funcionamiento: 15.000 hNota: Sin portaherramientas Auction-ID: A1-44030-59