mandrinadoras y centros de mecanizado usadas para la venta (3,220)

spindle diameter: 125 mmx-travel: 3000 mmy-travel: 2000 mmz-travel: 1500 mmW-axis (spindle longitudinal): 600 mmtable-size: 1250 x 1600 mmtable load capacity - central/maximum: 5000 kgControl: Heidenhain iTNC 530 tool taper: ISO 60 spindle turning speed range: 5 - 3000 U/minspindle drive motor: 37 kWmax. torque on the spindle: 1646 Nmtransmission ratio: 2 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWorking hours:- Machine on: 59.078 h- Autom. cycle: 24.207 h CNC-control HEIDENHAIN iTNC 530 Coolant equipment Table B-axis, 360.000 positionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 8000 mmy-travel: 4000 mmz-travel: (RAM) 1000 mmW-axis (spindle longitudinal): 800 mmControl: Heidenhain iTNC 530 tool taper: ISO 50 DIN 69871spindle turning speed range: 5 - 2500 U/minspindle drive motor: 40 kWmax. torque on the spindle: 2024 Nmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWorking hours:- Machine on: 27.315 h- Autom. cycle: 11.533 h CNC-control HEIDENHAIN iTNC 530 30-pos. ATC Floor plates 8000 x 4000 mm Coolant equipment with coolant through spindle Swarf conveyor movable operators platform DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-viaje: mmy-viaje: mmz-viaje: mmm-recorrido: mmConsumo total de energía: kWweight de la máquina ca.: trequired space: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-viaje: mmy-viaje: mmz-viaje: mmm-recorrido: mmConsumo total de energía: kWweight de la máquina ca.: trequired space: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore capacity in steel (diameter): 62 mmarm length: 350-1600 mmworkpiece height max.: 1250 mmdistance spindle nose and table: 350-1250 mmBoring depth max.: 315 mmmachine table: 2400 x 1000 x 200 mmTurning speeds of the bor. spindle: 38 - 2000 U / minspindle taper: MT5 feed: 0,06 - 1,00 mm/Uengine output: 4 kWstroke drive: 1,5 kWoil pump: 0,75 kWtotal power requirement: 6 kWweight of the machine ca.: 3,8 tdimensions of the machine ca.: 2490 x 1050 x 2780 mmSteps of spindle speed: step-lessSteps of spindle feed: 8Speed of the arm up and down: 1.2 m/minArm moving angle: ±180 degreeSpindle moving distance of each dial revolution: 122 mmMax. spindle torque: 400 NmMax. spindle feed resistance: 16000 NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-recorrido: 660 mmy-recorrido: 500 mmz-recorrido: 600 mm, superficie de la mesa: 630 x 500 mm, conicidad del husillo: SK 40 rango de velocidad de giro: 20 - 6,300 U/minfeeds: 30 m/mincontrol: PHILIPS CNC 532 alimentación interna del sistema de refrigeración: 40 bar. Consumo total de potencia: 50 kWweight de la máquina, aprox. 13,3 t, con cambiador de palet rotativo y hydr. Cabeza giratoria (horiz./vert.)Accesorios: transportador de virutas y refrigerante. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 1500 mmy-travel: 650 mmz-travel: 650 mmsize of pallet: 1740 x 650 mmspindle taper: SK 50 spindle turning speed range: 25 - 6000 U/minfeeds longditudinal/cross/vertical: max. 8 mm/minrapid traverse longitudinal and cross: 26 m/minrapid traverse vertical: 20 m/minspindle throat: 665 mmdistance spindle nose and table: 200 / 850 mmdrilling in full material: 50 mmøthreading: M 45 ATC: 60 Postool diameter: 125 mmwotkpiece diameter with 2 vacant positions: 260 mmworkpiece length: 400 mmweight of tools max.: 20 kgspindle drive: 18,5 kWcontrol: MAZATROL M PLUS Accessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.050 mmtravel -y axis: 570 mmtravel -z axis: 510 mmcontrol: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/mintool taper: BT 40 table dimension (L x W): 1300 x 570 mmnumbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor.The machine only has 13.600 spindle hours.The machine is in a well-maintained condition and has exclusively workedon Aluminum and Plastics.The machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DNM5700 | DNM-5700The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 132-1852 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: FANUC Prof 3/A rapid travel x/y/z: 30000 mm/minpalets changer: 630 x 630 table weight: 1200 Kgspindle speed:: 14000 U/minspindle taper: HSK A 63 spindle motor: 30/25 kWtool change unit: 40 posdistance spindle center to table: 100-850 mmInternal cooling system: weight of the machine ca.: 17 tdimensions of the machine ca.: 7,9 x 4,2 x 3,3 mEquipped with:- Fanuc Professional 3/A CNC control- Coolant through spindle- Pallet changer- Tool changer (HSK-A63)- Knoll coolant system (renewed)- Chip conveyor- Mütek briquette press (2015)The machine has been used reliably in single-shift operation in recent years, operating hours: Spindle hours:The scope of delivery includes numerous HSK-63 tool holders – both thosecurrently in the machine and a complete Euro pallet withadditional tool holders.- Two clamping towers (without pallets)The  ...

Capacidad de diámetro en acero (diámetro): 15 mm garganta: 220 mm de carrera: 80 mm: 2 velocidades: 320 - 1600 U/tamaño miniatura: 350 x 285 mm peso: 125 kg dimensiones: 700 x 600 x 1500 mm Características: - Microdosificación- Corte de rosca M2-10Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore capacity in steel (diameter): 23 mmthroat: 220 mmbore stroke: 120 mmNumber of revolutions: 25 - 3.200 U/mindistance Spindlenose and center of table: 275 mmtable surface area: 300 x 355 mmT-slots: 3x T - slots distance: 120 mmcolumn diameter: 110 mmtotal power requirement: - kWweight of the machine ca.: ca. 120 kgdimensions of the machine ca.: 0,8 x 1,0 x 1,9 mTable Drilling MachineIXION - BT 23 ST- incl. base cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 25 mm garganta: 220 mm carrera de diámetro: 110 mm de cono MK: 3 MK Tamaño de la tabla: 350 rund mmfeeds: mm/Velocidad de giro: 100 - 2080 U/minconnected Frecuencia de carga: 400 V Requisito total de potencia: 0,9 KWpeso de la máquina aprox. 0,2 tdimensiones: 0,8 x 0,6 x 1,9 m Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cilindrada del diámetro en acero (diámetro): 40 / 23 mm Garganta: 320 mm carrera del diámetro: 180 mm: 4 velocidades: 30 - 765 U/tamaño de miniatura: 720 x 550 mm, peso de 480 kg: 750 x 900 x 1900 mm. Equipamiento: - Cabeza multihusillo, taladro 23 mm- alimentación automática - dispositivo de refrigerante - velocidad infinitamente variable - tope de profundidad de perforación ajustable Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmsize of pallet: 1.000 x 1.250 mmcontrol: SIN840D power capacity at 40 % load: 38,00 KWspindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 Nmtool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/minrapid traverse X/Y/Z: 60,00 m/minB - axis: -150° / +80° x 0,001 °feed B-axis: 3.600 ° / minC-axis: 360 x 0,001 °Rapid motion C- axis: 1 - 3.600 U / min.table load: 3.000 Kgtool magacine with: 240 tool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 250 mmtool length - max.: 650 mmweight of tools max.: 15,00 kgtotal power requirement: 75,00 kWweight of the machine ca.: 55,00 tdimensions of the machine ca.: 12,50 x 8,00 x 4,20 m5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheeloperating mode 4240-position tool magazine 4- ...

x-travel: 1000 mmy-travel: 1000 mmz-travel: 950 mmControl: FANUC Pro-3 feed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/mintool taper: HSK-A 100 turning speeds: 20 - 12.000 U/minspindle drive: 25 / 30 kWtorque milling spindle: 420 Nmspindle diameter in front bearing: 110 mmB - axis: 360 x 0,001 °size of pallet: 2x 800 x 800 mmtable load capacity: 1.800 kgdimension of workpiece: 1.000 x 950 mmworkpiece height max.: 1.000 mmtool piece magazine with: 188 tool length - max.: 475 mmtool diameter: 320 mmweight of tools max.: 20,00 kgtotal power requirement: 65,00 kWweight of the machine ca.: 30,00 tdimensions of the machine ca.: 8,00 x 5,30 x H3,50 mHorizontal machining center with FANUC Porfessional 3 control, NC rotary table, el. handwheel, chip conveyor,coolant filter KNOLL VRF 450/2300, through-spindle coolant,188-station tool magazine. New spindle in 2023Machine can be in ...

bore capacity in steel (diameter): . mmarm length: . mmworkpiece height max.: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 450 mm: 500 mm: 900x450 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1100 mm: 650 mm: 610 mm: 1200x6000 mm: BBT 40 : 12.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0550 mm: 410 mm: 480 mm: 650x410 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: Siemens ergoline table surface area: 2x 790 x 560 mmnumber of pallets: 2 rapid traverse: 30 m/minturning speed range: 8000 U/minpower capacity - milling spindle: 13 kWno. of tools in the magazine: 30 Stücktool taper: SK 40 | |weight: 5,2 tdimensions: 3,1 x 2,1 x 2,7 mvertical machining centre wit 2x palettchanger,Equipment:- 2x palettchanger- chipconveyor- internal coolant- filter system- ext. hand wheel- laser tool setter- cableless 3D probe- oil dust collector- Siemens ShopMill dialog programming- Roto Clean- signal lamp- spindle oil coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: iTNC 530 HeidenhainMain spindle:: power capacity - main spindel: 13 / 9 kWturning speed range - main spindle: 20 - 10.000 min/-1Torque: 83 / 57 Nmtool taper: SK 40 tension force: 10 kNwork table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minFeed force: 5 kNinput unit: 0,01 mmrapid traverse: 30 m/mintotal power requirement: 20 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Coolantsystem: high pressure coolant: 6 barChip con ...

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 colour: 3D quickSE ...

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: 5 Axis CNC - MachiningCenter UniversalDECKEL MAHO - ...

x-travel: 1020 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain4. axiselectronical hand wheel20-fold automatic tool changerchip tankTechnische Daten / technical details:Verfahrweg X / X-Travel 1020 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 510 mmTischgröße / table size 1200x450 mmWerkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32.0 mm: 35.0 mmbore stroke: 150 mm: M 22 (St 60) throat: 300 mm: 0.1 - 0.2 mm/U: MK 4 : 480 x 480 mm: 80.0 - 1.170 U/min: 0.90 / 1.35 kW: 340 kg: 800 x 1000 x 2000 mm Manufacturers list price: 8.665.00 EURO Special price on requestEquipment:- Column drilling machine - V-belt drive- infinitely variable speed adjustment- Manual automatic spindle feed- Thread cutting device automatic feed reversal RS for thread cutting- pole-changing drive motor- depth scale and adjustable depth stop- Height-adjustable work table Adjustment with hand crank- Right/left rotation of the drill spindle- Machined machine base incl. coolant device- Machine/work light- Folding drill spindle guard- Emergency stop button at the front- CE marking + instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FIDIA PCN 775 : . x-travel: 1000 mmy-travel: 620 mmz-travel: 700 mmAxis: 5 Achsen simultan gesteuertweight: 12 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número de husillos: 3 diámetro de diámetro en acero (diámetro): carrera de 40 mm: 180 mm peso de la máquina aprox.: 2,3 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.