mandrinadoras y centros de mecanizado usadas para la venta (3,220)

x-travel: 2100 mmy-travel: 1020 mmz-travel: 762 mmControl: Fanuc MXP-200FP spindle speed: 6000 U/minspindle capacity: ca. 22 kWmax. torque on the spindle: ca. 550 Nmtool taper: SK 50 table surface area: 2300 x 1020 mmmax. table load: 3000 kgT-slots: 6 x 22 mm T-slot - distance: 150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-Axis CNC Machining CenterEquipment/Accessories:- Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm- coolant system with internal coolant supply and filter- emulsion mist extraction- electronic handwheel- 2 pcs. magnetic clamping plates 800 x 400 mm- various tool tapers SK50- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.000 mmtravel -y axis: 510 mmtravel -z axis: 480 mmtravel of - x axis (rotary-tilting table): 420 mmtravel - x axis (fixed machine table): 450 mmcontrol: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/minnumbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mmworkpiece weight: 300 kgClamping surface of rotary-tilting table: 420 mmworkpiece weight: 200 kgspeeds of rotary table: 30 U/min5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit.With only 9,787 spindle hours, the unit shows low operating time.The machine is in a well-maintained condition and can be inspected at any time under power.A machine video can be provided on request.Please refe ...

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmtable surface area: 790 x 560 mmspindle taper: SK 40 spindle turning speed - stepless: 20 - 12.000 U/minspindle drive: 13 kWmax. torque on the spindle: 83 Nmfeeds x/y/z -stepless: bis 20.000 mm/minrapid traverse: 30 m/minATC: 20 Pos.tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 12 barcontrol: HEIDENHAIN, TNC 620 total power requirement: 17 kVAweight of the machine ca.: 3,9 tdimensions of machine L x W x H: 3,0 x 1,92 x 2,35 mAccessories: probe HEIDENHAIN, TS 460, electron. hand panel, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 10500 mmy-travel: 4000 mmspindle taper: ISO 50 z-travel: 950 mmturning speeds: 3,15-1000 U/mintransmission ratio: 4 spindle power: 58 kWSupport sleeve: 340x400 mmw-travel: 900 mmFeed: x 0,12-9600 mm/UFeed: y/z/w 0,1-5600 mm/UPlate area: 39,5 m²Plate: 5400x3500 mmPlate: 5900x3500 mmT-slot - distance: 365 mmT-slots: 35/75 mmThickness of the plate: 360 Control: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, p ...

x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 828 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 12000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 kWtool change unit: 30 Pos.total power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- Siemens 828D CNC control- Direct drive spindle: 12,000 rpm- Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper)- Oil cooling of the spindle head- Thermal compensation system (software)- Tool magazine: 30 tools- RENISHAW tool and workpiece probe- Internal cooling via the spindle centre: 12 bar- External cooling with air and cooling lubricant- Internal thread spindles + chip conveyor b ...

Longitud del brazo: 1600 mmAdaptador de herramienta: JA Tejido-No.: 9787 Peso: 4,6 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 3.400 mmy-travel: 3.400 mmz-travel: 1.600 mmControl: CELOS 840D sl Op SiemensMain spindle:: max. spindle speed: 20 - 15.000 min/-1power capacity - main spindel: 52 / 42 kWtool taper: HSK-A100 max. Torque: 404 / 280 Nmswivellable: B: -30° / +180 °NC-Rotary table:: table diameter: 2.500 x 2.000 mmmax. table load: 10.000 kgtable speed: 5 min/-1distance spindle center to table: hor.: 130 - 1.730 mmdistance spindle center to table: vert.: 230 - 1.830 mmdistance spindle nose and table: hor.: -1.500 - 1.900 mmdistance spindle nose and table: vert.: -1.600 - 1.800 mmTool-Presetter:: type: 5x Rad- / Wheel number of toolpositions: 303 pos.max. tool diameter: 110 mmmax. tool-dia with free toolbox: 280 mmmax. tool length: 900 mmmax. tool weight: 45 kgtool changing time: 7,5 sectool taper: HSK-A100 feeds:: rapid traverse: 60 / 30 / 40 m/mintotal power requirement: 140 kVAweight of the ...

x-travel: 4500 mmy-travel: 800 mmz-travel: 600 mmcontrol: HEIDENHAIN iTNC 530rapid traverse: 30/40/40 m/mintable surface area: 5300 x 750 mmtable load: 4,5 ttool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/minspindle motor: 29 kWspindle distance: 325 - 925 mmtool piece magazine with: 30 Plätzentotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mequipped with:- CNC-Control Heidenhain iTNC 530- IKZ 20 bar- NC Swivable Table- Chip Conveyor- Coolant- Tool Changer 30-fold (SK 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 730 mmy-travel: 850 mmz-travel: 560 mmcontrol: Mazatrol Matrix Main spindle:: turning speed range - main spindle: 35 - 10.000 min/-1power capacity - main spindel: 30 / 22 kWtool taper: SK 50 Tool changer: 30 pos.size of pallet: 630 x 500 mmworkpiece weight max.: 500 kgA-Axis: -120 ~ +30 °C-Axis: 360 °rapid traverse ( X / Y / Z ): 42 m/mintotal power requirement: 64 kVAweight of the machine ca.: 19 tdimensions of the machine ca.: 5,5 x 2,69 x 3,5 m5-axis simultaneous machining centre:- 5-axis CNC control Mazatrol Matrix & handwheel- NC Rotary Table swivable- 30-fold tool changer (SK 50)- IKZ 20 bar- Chip conveyor- Renishaw RMP 600Operating/switch-on hours:The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 40 mm Garganta: 385 mm Carrera de diámetro: 200 mm Ángulo del husillo MT: 4 rango de velocidades de giro: 61-1169 U/mintable: 470 x 560 mm Requisito total de potencia: - kWweight de la máquina aprox: 700 kg Dimensiones de la máquina ca.: 900x800x2000 mm Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

travel -x axis: 1.200 mmtravel -y axis: 900 mmtravel -z axis: 500 mmcontrol: HEIDENHAIN tool taper: SK 40 milling spindle dia. in forward position: 70 mmtable surface area: 1.400 x 900 mmMilling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C1200 V | C-1200 V | C 1200-V | C1200VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.050 mmy-travel: 610 mmz-travel: 610 mmcontrol: HEIDENHAIN iTNC 530 Distance between table and spindle: 100-710 mmtable-size: 1.200 x 600 mmtable weight: 1.200 Kgrapid travel x/y/z: 30.000/20.000 mm/minfeed: 12.000 m/minspindle taper: BT-40 spindle turning speed range: 60 - 10.000 U/minspindle drive: 7,5/11 kWTools changer: 20 pos.Internal cooling system: 20 barChip coveyor: 2 handwheel: HEIDENHAIN HR-410 tool diameter: 100 mmtool length - max.: 320 mmweight of tools max.: 10 kgtotal power requirement: kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2.900 x 3.420 x 2.888 mComplete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box -Electrical cabinet air conditioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1600 mmy-travel: 1120 mmz-travel: 1250 mmtable surface area: 1250 x 1250 mmspindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/minfaceplate turning speed range: 7,1 - 224 U/minfaceplate diameter: 600 mmtable load: 4000 kgmain drive motor: 11 kWmax. travel of spindle: 900 mmtotal power requirement: 15 kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6 x 3,1 x 3,1 mOverhauled/Modernized in 2003- DRo Heidenhain- Faceplate with slideThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1600 mmy-travel: 1120 mmz-travel: 1250 mmtable surface area: 1250 x 1250 mmspindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/minfaceplate turning speed range: 7,1 - 224 U/minfaceplate diameter: 600 mmtable load: 4000 kgmain drive motor: 11 kWmax. travel of spindle: 900 mmtotal power requirement: 15 kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6 x 3,1 x 3,1 m- DRo Heidenhain - Faceplate with slideThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mmy-travel: 660 mmz-travel: 635 mmcontrol: Haas table surface area: 1.372 x 610 mmtable load: 1.814 kgrapid traverse: 18 m/minturning speed range: 7.500 U/minpower capacity - milling spindle: 22,4 kWtool taper: SK 50 |no. of tools in the magazine: 30 Stückweight of the machine ca.: 7,5 tdimensions: 3,5 x 2,47 x 2,98 mVertical Machining Center with 4th axis- chipconveyor- external handwheel- Dual tool change arm- internal coolant- filter- 4th axis, HRT 210 A- prepared for cableless 3D touch probe- oil dust collector- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- ULTIMAX 4 control- toolchanger for 24 tools- coolant through spindle- chip tank- electronical hand wheelTechnische Daten / technical details:Verfahrweg X / X-Travel 610 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 610 mmTischgröße / table size 760x510 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 fachEilgang / rapid feed 30 m/minGewicht der Maschine ca. / weight 4700 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of L ...

control: FANUC Professional 6 Number of axles: 4 St.x-travel: 900 mmy-travel: 900 mmz-travel: 1020 mmb-axis: 0.001 °size of pallet: 630 x 630 mmtool piece magazine with: 136 milling spindle: HSK100 spindle turning speed - stepless: 10000 U/mintype of pallet-changer: FASTEMS FPC1500 chip conveyor: kWmisc. accessories: weight of the machine ca.: 20 tdimensions of the machine ca.: 10 x 5 x 3.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 310 is-A Número de ejes: 4 St.x - recorrido: 730 mmy - recorrido: 730 mmz - recorrido: 650 mmb - eje: 0,001 tamaño del palet: 500x500 mm, cargador de pieza de herramienta con: 60 husillo de fresado: HSK63 velocidad de giro del husillo - escalonado: 50-12000 U/transportador minchip: kWmisc. accesorios: peso de la máquina aprox: 10 tdimensiones de la máquina aprox. 3,0 x 5,0 x 3,0 m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

control: FANUC 18i MB Número de ejes: 4 St.x - recorrido: 710 mmy - recorrido: 610 mmz - recorrido: 650 mmb - eje: 0,001 tamaño del palet: 500x500 mm, pieza de herramienta de cargador con: 60 husillo de fresado: BT40 velocidad de giro del husillo - escalonado: 15000 U/transportador minchip: kWmisc. accesorios: peso de la máquina aprox. 15 tdimensiones de la máquina aprox: 5,1 x 3,7 x 3,1 m. Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

X-recorrido: 800 mmy-Recorrido: 600 mmz-recorrido: 500 mm, consumo total de potencia: kWweight de la máquina aprox. : tDimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 22 mm Garganta: 270 mm Velocidad de giro del husillo - sin escalones: U/peso mínimo de la máquina aprox: 1,1 tdimensiones de la máquina aprox: 1,2 x 1,2 x 2,2 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmcontrol: iTNC 530 HeidenhainNC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 / 87 Nmtool taper: HSK-A63 swivellable: NC: +30 / -120 °work table:: table surface area: 1.000 x 600 mmT-slots: 9x 14 x H7 max. table load: 700 kgtool magazin:: number of toolpositions: 60 pos.tool taper: HSK-A63 total power requirement: 49,7 kVAweight of the machine ca.: ca. 11,0 tdimensions of the machine ca.: 4,5 x 4,5 x 3,5 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: turning milling head: elektr. hand wheel: Rotary screen: paper band filter: Spray gun: exhaust fan: indexing attachment: EA-733.20 Tailstock: CNC - MachiningCenter UniversalDECKEL MAHO - DMU 60 monoBLOCK- 5 Axis- Swivel-MillingheadThe data for this ad was created with ModulMW ...

x-travel: 500 mmy-travel: 350 mmz-travel: 610 mmControl: Heidenhain TNC 426 / 430 NC 2-Ax Dividing Head: ATS 200 / Sph. 200 mmmeasuring feelers - electric: Vorbereitung IR Meßtaster tool piece magazine with: 24 x SK 30 turning speed range: 50 - 18.000 U/minhigh-pressure pump: KNOLL KTS 25-38-T / ca. 5 kWchip conveyor: KNOLL 300 K-1/400 FKA 270 total power requirement: 20 kWweight of the machine ca.: 3,8 tdimensions of the machine ca.: 3,52,53 mSonderpreis bei Übernahme ab WerkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mmy-travel: 2500 mmtable-size: 2.000 x 2.500 mmtable weight: 20.000 KgB-axis (table): (0.001º) mmw-axis: 2000 mmz-axis: 800 mmrapid taverse: 10.000 mmtaper ISO: ISO 50 turning speeds: 0-2.000 U/minspindle drive motor: 37 kWTorque: 12–183 U/min 0internal coolant system feed: inkl. handwheel: HEIDENHAIN HR-410 total power requirement: 74 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 40 mm garganta: 230 mm carrera de diámetro: 130 mmtaper MK: 4 MKtamaño de la tabla: 400 x 315 mm de giro: mm/Velocidades de giro: 105 - 1257 U/min Requisito total de potencia: 2,55 KWpeso de la máquina aprox.: 0,35 tdimensiones: 0,8 x 0,6 x 1,95 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Control: NCT tamaño de la mesa: 700 x 500 mm, refrigerante: ja Diámetro de la herramienta: SK 50 2 dispositivos de sujeción cambiador de herramientas de 20 posiciones. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

spindle diameter: SK 30 mmx-travel: 420 mmy-travel: 240 mmControl: Heidenhain TNC 355 total power requirement: 10 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 5356Vertical drilling and milling machineFEHLMANN Picomax 51 CNC 3Working area: 420 x 240 x 120 / 450Drive: 4 kWControl: Heidenhain TNC 355Table 720 x 280 mm / 120 kg loadSpindle holderSpeed range 55 - 9,000 min-1Space requirement approx. 3 x 2 x 2.4 mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.