Mesas giratorias de soldadura (26)

El posicionador de soldadura PEMA HPS 3500 y TPS 3500 fue fabricado en 2021 en Finlandia por Pemamek Oy Ltd. El sistema consta de dos máquinas extremadamente versátiles: la pala HPS 3500 y la pala trasera TPS 3500, con una carga útil combinada de 7 toneladas. Esta solución está dedicada a levantar y girar piezas largas, lo que la hace ideal para la producción, entre otros, de torres de viento, bastidores de remolques o tubos. Ambas máquinas pueden trabajar juntas o de forma independiente. El ajuste de altura sin escalones garantiza un ajuste preciso de los parámetros de trabajo según las dimensiones de las piezas. Especificaciones técnicas del posicionador de soldadura PEMA HPS 3500 y TPS 3500 - carga útil: 7 t (cabeza de pala 3,5 t + contrapunto 3,5 t) - velocidad de rotación: 0,06-1,3 rpm - Rango de ajuste de altura del eje basculante: 700-1500 mm - Diámetro de la p ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 €: 468.48 €: 3000 kg: 150 mm: 150 mm: 360 °: 135 kgm: 400 / 50 V / Hz: 1.1 kW: 1.1 kW: 1200 mm: 700 - 950 mmThe hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted to the floor.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.The rotation speed can be adjusted via a potentiometer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 295 mm, 100 kg

Rotador de soldadura SAF POSISAF 1E Diámetro del estante: Ø 295 mm Capacidad máxima: 100 kg Giratorio manual Rotación por variador de velocidad derecha/izquierda Equipado con un mandril concéntrico de 3 mordazas Ø 200 mm Voltaje: 220 V mono Dimensiones en el soporte: L 800 x W 450 x H 1200 mm

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...

Posicionador giratorio de doble columna con dispositivo de elevación Lg.Nr. 25138 Características técnicas: - Capacidad de carga máx. por soporte 4000 kg - Capacidad de carga total máx. 7000 kg - Recorrido / carrera 1780 mm - Velocidad de elevación 1600 / 2800 mm/min - Movimiento giratorio electr. ajustable - Derecha + Izquierda – Correr - Accionamiento 400 V - Requisitos de espacio solicitados. Unidad aprox. 1500 x 4000 x 1500 mm - Espacio necesario para la unidad móvil W 1300 x H 4000 x D 1300 mm - Unidad de peso accionado aprox. 4000 kg - Peso de la unidad de carrera aprox. 2500 kg

: neu : 2025 : 020156 : prompt, Zwischenverkauf v : Türkei : 6720 €: 129.7 €: 1 : 250 kg: 205 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mm: 1000 mm: 700 mm: 1700 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following f ...

El posicionador de soldadura BODE TT60 se utiliza para la manipulación de una pieza de trabajo con un peso máximo de 3000 kg durante el proceso de soldadura. El dispositivo permite trabajar en la posición óptima, contribuyendo así a mejorar la calidad de la soldadura. La versatilidad combinada con soluciones de diseño perfectamente pensadas hacen que el posicionador de soldadura BODE garantice un manejo seguro y un funcionamiento sin problemas durante muchos años de uso. Especificaciones técnicas de la plataforma giratoria de soldadura BODE TT60 - Peso máximo de la pieza: 3000 kg - Diámetro de la mesa: 2800 mm

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 11000 €: 211.2 €: 1000 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.55 kW: 0.75 kW: 0.1 - 3 U/min: 60 s: 1200 mm: M20X6 mm: 1000 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segment ...

Oferta 23348 Características técnicas: - capacidad de carga máx. 1500 Kg - Diámetro de la placa frontal 850 mm - Distancia entre el suelo y el eje central de rotación 800 mm - Movimiento giratorio electr. infinitamente variable 0,08 - 1,6 rpm - Derecha - + Izquierda - Correr - Transmisión de corriente de soldadura aprox. 700 A - Accionamiento 400 V / 2,2 kW - Requisitos de espacio Unidad aprox. 850 x 1450 x 1000 mm - Espacio necesario: Unidad móvil de 850 x 1450 x 1000 mm de profundidad - Peso de la unidad motriz aprox. 550 kg - Peso de la unidad móvil aprox. 400 kg

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 €: 149.19 €: 500 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.37 kW: 0.1 - 3 U/min: 45 s: 800 mm: M20X6 mm: 640 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segmentcyc ...

Key data: 1500 mm, 3500 kg

Número de inventario: 3871 PLATO GIRATORIO DE SOLDADURA Fabricante: ESAB PEMA, Tipo: 3500 F N.º de máquina: A7001, Año de fabricación: 1987 Características técnicas: Tamaño de la mesa 1500 mm Ø Gran peso de la pieza 3500 kg Gr. par de rotación 3100 NM Rotaciones de mesa infinitamente variables. 0,01 - 0,8 pr/min Accionamiento hidráulico y punta Longitud: 2000 mm, Altura: 1100, Anchura: 1500 mm, Peso: 1200 kg

table diameter: 900 mmtable load: 1.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1,1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-105 °Tilting Speed: 30 sn min./90°dimensions: 2100x920x1100 mmweight of the machine ca.: 930 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

características técnicas: - Capacidad de carga Tabla de posicionamiento aprox. 750 kg - Diámetro de la chapa 500 mm - diámetro máximo de la pieza de trabajo 1600 mm - Tocadiscos de altura en posición horizontal aprox. 750 mm - Tocadiscos con la derecha, + carrera a la izquierda - Tocadiscos del eje giratorio sin fin 360 - Tiempo de giro por revolución 12,5 s. - Panorámica izquierda + derecha - Ángulo de rotación del eje pivote 180 - Tiempo giratorio para 180 ángulo giratorio 10 seg. - 2 x botón de doble pie para tocadiscos + brazo giratorio - hydr. Pernos de sujeción para sujetar la pieza de trabajo en el centro del tocadiscos - Carrera de sujeción / distancia de sujeción del perno de sujeción 32 mm - Prensado de fuerza de sujeción / extracción 80 / 48.9 kN - Rosca interna del cilindro de sujeción M 27 x 40 - Control de posicionamien ...

table diameter: 500 mmtable load: 300 horizontal kg.table load: 150 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,5 U/minbore: 90,0 mmtable height: ~ 650 mm mmmotor: 230 Voltweight of the machine ca.: 90,0 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be tilted and clamped at an angle of 0 ° to 90 °- manual tilting- Start / stop via location-independent foot switch- Direction of rotation can be selected right / left- Adjustable rotation time- The control of the welding machine via control- 350 amp ground connectionScope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad: 6000 kg Dimensiones de la placa: 1500 x 1500 mm Rango de insmitación de inclinación: horizontal a - 145o Velocidad de rotación: 0 - aprox. 1 rpm electr. Conexión: 400 V, aprox. 5 kW Requisito de espacio: 2800 x 2350 x 3250 mm Peso: 5000 kg

table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de carga máxima con disco de cepillado horizontal 60 toneladas, carga máxima con tablón vertical 90o en un centro de carga de un metro 30 toneladas – con un centro de carga de dos metros 19 toneladas.

diámetro de la mesa: - mmcarga de la mesa: 3000 kgrango de giro: 360 Gradrango de movimiento vertical: 1380 mmvelocidad de carrera: 1900 mm/min: 360 requisito de potencia total: 4 kWpeso de la máquina aprox.: 5400 kgdimensiones de la máquina aprox.: 3800 x 3700 x 4200 mm

table load: max. 40 t twith manual operation panel: ja weight of the machine ca.: 22 t: 1918 Year: ca. 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kgWorking height minimal: 350 mmWorking height maximum: 1850 mmmax. torque: 3000 Nm0: 1 U/minadjustment speed: vertikal 560 mm/minvertical adjustment: 1500 mmbaseplate diameter: 600 mmrotation movement: 0,75 kWstroke drive: 1,85 kWheight of the plant: 2505 mmweight: 1160 kgVideo available on our website.: Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory.Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation.Due to its special design, the column po ...

weight max. in kg: 1250 kgWorking height minimal: 540 mmWorking height maximum: 1120 mmtable diameter: 800 mmswivelling range: --> 95 Gradmax. torque: 490 Nmtable rotation speed: 2 U/minWorking height from to: 540 - 1120 vertikal mmWorking height from to: 700 - 1280 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 757 kgdimensions of the machine ca.: 1,76 x 1,63 mHydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 2 tswivelling range: --> 95 Gradmax. torque: 1250 Nmtable rotation speed: 2 U/minWorking height from to: 550 - 1300 vertikal mmWorking height from to: 650 - 1400 horiz. mmtotal power requirement: 2,53 kWweight of the machine ca.: 930 kgdimensions of the machine ca.: 1,85 x 1,66 mElectric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting,Raise and lower.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.