máquinas de soldar usadas para la venta (1,771)

Auction-ID: A7-42952-4

Altura total 290 cm Auction-ID: A1-43179-635

Auction-ID: A1-41983-68

Auction-ID: A1-41983-71

Auction-ID: A1-41983-67

Auction-ID: A1-42563-308

Auction-ID: A1-41983-69

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special Item: Messeeinsatz table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.400 kgTrade Fair TABLESlight signs of wear on the surfaceWelding table:- 6 legs - basic equipment 650 mm- Through-hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Side cheek made of high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilled holes Surface in diagonal grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Side panel holes in diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 2000 mmtable height: 200 mmbore: 28 mmweight: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipado con alimentador de cable Esab Feed 304 Auction-ID: A1-42563-15

: neu : ca. 2 - 4 Wochen ab Auftr : 4862 €: 3000 x 1500 mm: 3000 kg: 755 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,3000 x 1500 x 200 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

Auction-ID: A1-41983-66

Móvil, incluyendo asiento Auction-ID: A1-42563-16

Auction-ID: A1-41983-72

Consta de: carro de acero con dos ruedas giratorias y conexión eléctrica, máquina de soldar tig Esab Caddy Tig 1500i, máquina de soldar Esab Caddy M32 Mig, 4 tubos con electrodos Esab OK Tigrod de 1,6 y 2 mm, bloque de terminales de soldadura Esab y 3 amoladoras angulares Bosch Auction-ID: A1-42563-14

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...

: neu : ca. 2 - 4 Wochen ab Auftr : 1725 €: 16 mmThe extended entry level with added value in the set configuration for the most common work steps and applications.Consisting of:8 screw clamps 180° HIS16Z30002 screw clamps 45° HIS16Z30452 V-support HIS16VP1004 stop brackets 90x37, 5mm HIS16WA90376 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3002 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11520 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-43090-92

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro: 16 mmweight: 13 kg. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 913 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.