otras máquinas para el procesado de metales usadas para la venta (11,464)

Exhibition machine, unused.>br>• 5 speeds>br>• With foot control>br>• With brake motor>br>• With emergency stop>br>• With hydraulic roller adjustment>br>• With special tool set>br>Sheet thickness 4 mm>br>Roller diameter 125 mm>br>projection 200 mm>br>Total power requirement 2.2 kW>br>Machine weight approx. 0.48 t>br>Dimensions approx. 1.6 x 0.6 x 1.2 mm

In this jet cabin is included as standard: blasting gun4-piece nozzle setset gloveslightingkit protective filmsfoot pedal.Pressure regulatorsuction with microfilterInternal dimensions 945 x 605 x 605 mmOperating pressure 2.2 - 5.5 barDimensions L x W x H 1.0 x 0.61 x 1.65 mPackage size max. 1300 x 1000 x 75 cmMachine weight approx. 0.09 tSystem is supplied in the colour black Condition: never used / new (5)

QuadTech / GenRad Guardian 610 – Safety Analyzer / Hipot Tester These devices are used for safety testing of electrical components, often in production, laboratories or quality assurance. Typical features: AC-Hipot DC-Hipot Insulation Testing Ground Bond Test Automated test sequences

Welding table on lift table: Hole diameter: 28mmThe table is made of 15mm thick steel S355The surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mmRibbed underside for reinforcement.Table length 2000 mmTable width 1000 mmLoad capacity 2000 kgLifting height max. 1525 mmTotal connected load 1.5 kWConnected voltage 400 V Condition: never used / new (5)

FAG 6316 0200G0726 - G217 0200 - 016724151-0000-02 - Made in Germany

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Floor planer / electrode weldersee pictures Condition: untested (6)

Welding current max. 180 Amperetechnical data see pictures not complete Condition: untested (6)

Welding helmetProtection level 4 - 12 MPower supply 2 x CR2032 Weight 460 gramsDimensions 250 x 270 x 230 mm Condition: never used / new (5)

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672

Toggle hand presses >br>HK 1700 stroke 60 mm with crank with working height fine adjustment>br>height of the stand 450 mm>br>Even more pressure in production without additional effort.>br>Maximum pressure output shortly before the end of the stroke thanks to knee lever technology.>br>Particularly stable construction of spindle head and stand>br>pressure 17.0 kN>br>stroke 60 mm>br>projection 105 mm>br>working height from up to 75 -180 mm>br>table surface 170 x 130 mm>br>spindle diameter 25 mm>br>machine weight approx. 35 Kg>br>Dimensions L x W x H 260 x 130 x415 mm >br>condition: never used / new (5)

Machine is equipped with:>br>- foot switch>br>sheet thickness 2.0 mm>br>projection 280 mm>br>roller diameter 78mm>br>total power requirement 1.5 kW>br>machine weight approx. 350 kg>br>space requirement approx. 1.2 x 0.8 x 1.3 m

Plasma cutting machine with: Digital display.Surge protection. Plasma torch. Underground cable. Reducing valve with moisture separator. Equipped with IGBT technologyWelding current 15 - 40 ACutting capacity 1 - 16 mmOpen circuit voltage 96 VCompressed air connection min. 4 barConnected load 3.6 kWConnected voltage 230 VWeight 9.0 kgDimensions LxWxH 371 x 153 x 232 mm Condition: never used / new (5)

Untested, without loading aids

FESTO VACF-B-K1-1-10-EX4-M Magnetspule / Solenoid coil , NEW , Mat-Nr. 8059806

Notching machine>br>- Foot switch>br>- Emergency stop>br>sheet thickness 6 mm>br>pressure 18 t>br>Knife length 220 mm>br>angle adjustable from - to 90 degrees>br>table surface 1100 x 950 mm>br>bending length 835 mm>br>Machine weight approx. 1.1 t>br>Dimensions L x W x H 1.2 x 0.8 x 1.4 m

10 pcs Quick Clamping Bolts for 28mm SystemPlate Thicknesses 25mmNumber 10 Hole Diameter 28 mmWeight 10 kgDimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5)

Hand-held press brake>br>bending length 300mm>br>material thickness max. 2mm>br>knife widths 25, 50 ,75 and 150mm>br>bending angle max. 90 degrees >br>condition: never used / new (5)

included: lattice box.

Technical data Note: There was no original machine documentation. To the best of our knowledge, the technical data was partly read from the nameplate or identified on the basis of the machine. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1975 Machine Type: Eccentric Press / Stamping Press Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Mechanical press drive with flywheel Separate control cabinet Foot pedal Material storage / parts ejection

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

XXL starter package, consisting of:- 15x – Standard clamping pliers- 5x – Multi-clamping pliers- 10x – Side clamp with eccentric- 15x – Loose cam H30- 10x – Loose cam H100- 2x – Pipe insertion knock series- 10x – Quick release bolt- 10x – Stop block 15mm- 4x – Right angle XL- 6x – Right angle- 6x – Angle of attack- 1x – Box- 1x – Insert holder- 1x – Allen key- Tool trolleyNumber 100Positions Hole diameter 28 mmCondition new Weight 280 kgDimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5)

Profile steel shears with>br>- 1 foot release>br>- Support tables>br>- Rectangular notch>br>- Hole punch incl. tools>br>round steel 32 mm>br>square steel 30 mm>br>angle steel 80 x 80 x 8 mm>br>cutting capacity flat steel 80 x 13 mm >br>punching force 36 t>br>projection 170 mm>br>working stroke 28 mm>br>working height 980 mm>br>material thickness 28 x 13 mm>br>hole diameter in sheet thickness 25x10 / 30x8 mm>br>machine weight approx. 0.8 t>br> space requirement approx. 1.8 tbr 2 x 0.8 x 1.9 m >br>condition: unchecked (6)

195 cm height 40 cm depth 94 cm width

Including paint sludge separation system

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

Welding table "SIGMUND Professional 750 + Plasma Nitrided" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 3000 mmTable width 1500 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 1.5 tDimensions L x W x H 3.0 x 1.5 x 0.9 m Condition: never used / new (5)